This Purple Abomination Gets The Restoration It's Been Crying For.

Antique Art Deco
12 followers
5 Video Views·Jul 28, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video documents the comprehensive restoration of a purple-painted solid oak sideboard. The project evolved from a simple refinishing task into a major structural overhaul to address woodworm infestations, poor original construction, and material decay, ultimately transforming a piece of potential landfill waste into a durable, organic, and aesthetically pleasing furniture piece.
This purple abomination was crying out for help and even Mando was like
what the heck is wrong with this one. So I decided to fix it.
Hello beautiful people and welcome to another project. This one was meant to be pretty
straightforward but turned out to be one of the most labor-intensive projects I've done in a while.
I haven't seen Mando this interested in a piece of furniture in a long time. I bet he couldn't
figure out why someone would paint this purple. Looks like this is solid oak even though the way
this was put together is pretty basic just with some nails. This gives me some flexibility and I
think I can make this look nice. These drawers will need a good clean on the inside so I'm going
to take the bottoms out which shouldn't be too difficult. Seems like the story in my last video
really resonated with many of you so thank you and I'm glad you enjoyed it. If you haven't seen
it yet I'll have the link in the end screens. This is a bit wobbly and I think I'll need to redo this.
Oh yeah. I'm not sure how I feel about this not to mention that it's got a piece missing
but I think I need to take this off so I can sand this and clean this properly anyway.
Here's a big problem. As you can see this is a piece of thin plywood that's basically the top
so it's not very sturdy but that's not the main problem. This is the main problem. It's incredibly
warped and it's sagging in the middle so I think this will either need to be replaced or I'll just
make a new top from solid oak. Not sure yet. Well I guess this is a pretty clear answer.
This simply isn't sturdy enough to be the top. It needs to be much thicker. Well so much for
a straightforward project. It's a good thing that I've got my shop supervisors to cheer me on.
I've got a feeling that I'll need many car breaks on this one. See the good thing about
holding on to all sorts of things is that sometimes you don't even remember you have it.
This is a beautiful solid oak desktop that's probably older than this sideboard and it
happens to be just about the right length. This is such a nice upgrade because not only
this is really old, this is oak, it's solid oak, it's really nice and thick and it's got beautiful
grain. So this will be very sturdy and someone will be able to use this as an actual worktop
and it's not going to bend and sag over time so pretty happy with this. This is literally
the right size and I think I just need to work on the edge a little bit and I'll leave it as it is.
I don't want to remove this. All right I think it's time to do some sanding. Well I've just made
another discovery. Not a very good one and I can see holes everywhere from woodworm. The other one
looks like it's pretty okay. Just a couple of holes from woodworm. I'll just need to redo the dowel.
They're not even the same size and they're not quite the same. You can definitely tell that
someone just turned these. They're not machine made. Well I've just made another discovery.
This is completely eaten by woodworm so I think I need to replace this bottom piece of plywood
because it isn't very strong. I should know better by now that when I think that something is going
to be easy or straightforward it just never is. It's probably not surprising but there is some
woodworm damage even on the structural bit so it's not ideal because this is something that's
difficult to cover but it's not too bad. I think I'll be fine. All right I can deal with the front
but what I'm genuinely worried about is this. If there's a lot of woodworm damage under this purple
paint that's going to be a big problem. I can already see that there is some here. There's
gonna be a lot of sanding on this one so cue the sanding montage. That's interesting because this
is actually in pretty good condition. I can't see any woodworm damage on this panel. Obviously this
will need a lot of work and I'll need to deal with all these holes but I think I've got a plan.
I hope you enjoyed this sanding montage. Cheddar is actually a beautiful village with really cool
caves where they keep cheddar cheese and this is the place where they make the original cheddar
cheese and it's absolutely delicious. I just realized that since I'm cutting off pieces of
the back legs I might as well make them exactly the same as the front ones because
why not? It's going to be a bit tricky to replicate this ring on the back leg because
I can't use my lathe but I think I've got an idea. Here's my plan. I've got this set for cutting
holes and if I can find one that is more or less this one is perfect. Yes! This is absolutely spot
on. So now I can basically drill about half an inch or like 10 mils into this, remove the corner
bits around this a little bit and I think it should look more or less the same. This sounds
like a good plan to me. I'll need to drill a hole for a dowel anyway so this way I know it's exactly
in the center so it's a win-win. I get lots of comments from people who try to teach me what
the restoration is. To me different projects call for different solutions. I find that restoring
pieces just so they look original but no one wants to buy them makes less sense. They're changing
them a little bit so they're desirable and people actually want to use them. I also need to round
these corners a bit because I don't want this to look too new compared to this. All right now I just
need to do the other one and Bob's your uncle. There's some screws sticking out but they are not
to hold the top. I need to cut this off otherwise I won't be able to glue the top properly.
This is one of those projects that I didn't have any plan whatsoever and actually even if I did
some of the issues that came up as I was working on it would have changed my plan anyway. I'm going
to use this rounded bit to get into this groove. It should make it a bit easier. This might be the
or one of the longest videos I've ever made and I cut out a lot of material because I didn't want
it to be boring. There was a bunch of little repairs I had to make along the way such as this
one. This stretcher that was holding the back piece on the back was broken so I had to fix it
somehow so it wouldn't move. This is the residue from the cardboard that someone put between the
back and the piece that was holding the drawers. Pretty interesting solution but hey if it works
it works. Of course I sanded the inside the bottom and everything else.
It seems like every time I finish one thing I would find another one to fix and
I think I was ready for another cut break. What's up trouble?
Fortunately Hugo or Mando were always available to cheer me up.
This is the original support piece for the bottom. I simply cleaned it up and I put it back in place
plus I added some additional support and by that I mean these L-shaped metal thingies.
I need some dowels to connect the feet but I only have pine so I'll need to make some.
And what's your uncle? The dowel making thing. I don't know if it's got a proper name.
It's actually not very expensive. I can put a link in the description if you want it.
It's pretty cool. So now I've got the dowels and I've drilled the holes. I guess I need some feet.
So because I was going to make just one of these I was going to turn it myself
but because I need four of them I'm going to use these legs which I already had.
These are hardwood legs and they are very similar in shape and I'm just going to flip
them upside down, drill a hole and Bob's your uncle. Once I put the finish on I'm going to
add these sliders to protect the edges of the feet. Alrighty we've got the feet done.
Now we just need the top, both shelves, the drawers and the doors. With old wood even if
you do a lot of sanding it still looks a bit gray and not very attractive so I use oxalic acid to
bleach it a little bit and also make it more uniform because you often end up with different
shades of gray and whatever color the wood is. And because it was nice outside after it dried
I gave it a rinse with water and it dried in no time. Alright let's tackle the drawers.
There's some ink stains and whatever this is so I'll see if I can remove them. I'm going to try
acetone for the ink. There is no woodworm damage on the drawer fronts which is amazing and because
this is solid wood with a lot of sanding I've been able to make them look very nice. I'm really
surprised how these drawers are put together because this is not very strong it's just two
nails they're super wobbly a bit cracked so I'll need to do something about this. By the way this
video is sponsored by you so if you enjoy my content give it a like subscribe and hype because
this helps a lot and makes it possible for me to do what I do. All my regular videos as well as
subscribing is completely free and if you want to join and become a member for extra stuff that's a
bonus. So I was about to put some screws in here and then I realized that there is a big issue.
So I'll need to replace this missing piece of wood otherwise the drawer won't go in and out as
it should. Also just wanted to say huge thank you to everyone for watching my videos for commenting
liking and hyping because that helps a lot and of course a special shout out to the channel members
you guys are the best because you don't need to go the extra mile but you do and I really appreciate
it. Taking apart the drawers and replacing the worn out bits definitely wasn't my bingo card but
well it had to be done because you know I'm a professional. And of course I applied oxalic
acid to all the other bits because I didn't want to end up with different colors.
All right time to deal with the doors. This is another thing that wasn't my bingo card
but I decided to take the doors apart. This would simply allow me to do much better job and it was
the right thing to do. I used vinegar and some heat to loosen up the joints hoping that whoever
put this together used hide glue which is reversible. And it seems like they did use hide
glue because it wasn't too difficult to take it apart. And also I managed not to break anything
doing it. So this panel that's plywood but the veneer is quite thick so I think I should be able
to make this look nice. By the way somehow while removing the moldings I managed not to peel any
veneer off which never happens. They cleaned up quite nicely but I'm going to put oxalic acid on
it and see how well I can bleach these. This is veneer so I can't really do any more sanding or
I'm going to go through the veneer which I don't want to do. Now that I'm done with that
I will need to do a lot of scraping so I better take a cut break before I do that.
All right things are drying. I've done some scraping. Now I need to drill some holes and
these are to put some dowels in so I can actually attach this piece to the top. And this is meant
to be easily removable for easier transport. Somehow I ended up with many more parts than I
started with and I think I should probably start putting this together. I'm really trying to do
some work today but someone is interrupting. So this repair is nice and dry now but it's a bit
too long so now I just need to cut off the excess with an E because every time I say excess it
sounds like I'm saying access. Anyhow now that I fixed the drawers I can put them together and I'm
adding some screws to make them stronger. And yes I realized a bit later that the side of this drawer
is a bit wonky and I fixed it off camera. Now that I'm done with the drawers I'm going to quickly
make the bottom shelf and I will install it. On top of using some wood glue I also use nails to attach it.
This is the original piece that was here in the middle and this supports the drawers so they can
slide in and out. And obviously this is not ideal so I was thinking about just flipping this upside
down but this is actually a little bit too short so I'm going to use a piece of oak which is
obviously more durable because this is hardwood so it will prevent this. After I made sure this
was leveled I drilled some holes from the inside out so I would know exactly where to put the
screws. I don't actually think I need to make one of these but I'm just being extra. Even though the
top is really thick and sturdy this will also connect the back and the front and just make the
whole construction a bit more rigid. All right I'm just going to glue it in place and Bob's your uncle.
It's funny because I thought that this was one of those fairly straightforward projects but
I get still so much work to do. I want to keep these panels natural color so I'm going to
use some wood filler to deal with these missing bits of veneer and now I just need to deal with
thousand little holes from woodworm. I want to keep some of the imperfections and have variety
of shades and different colors and make it look organic otherwise I could have just stained it.
By the way this thing I'm working on right now there was a hole I don't know what caused it
but I made this plug and glued it in place and I'll just plane it and sand it later on to make
it nice. But first I need to deal with the top and now that the top is sanded I need to figure
out what to do about the edge. So this is what I did as far as the edge and the frame that I'm
putting the top on. Most people would probably remove it because the thickness of the top would
simply replace it but I like how chunky it is. It also gives me an extra layer and I think it
just looks different and kind of cool. And now I'm using this contraption to drill hopefully
straight holes so I can use dowels to attach the top to the frame. These are called pointy thingies
just kidding I don't know what these are called and you stick them in the holes that you just
drilled and when you put the top on them they'll leave a mark so you know exactly
where to drill the corresponding hole so the dowels line up. In case that made absolutely
no sense this is what I meant. Could I have attached this top in many other ways? Definitely.
Is this the best way? Probably not but hey it worked. They're a bit too long so I'm going to
cut them and because now the ends are straight or flat or whatever I'm using my little sander
thingy to make them more pointy so they go in the holes easier. How's that for a perfect fit?
As I mentioned before when the plug repair was drying I used my hand plane and a sanding block
to make it look a bit nicer. All right finally time to do some staining. I've never used this
stain before so I hope it's decent. This is water-based stain. I think it's actually a pretty
nice color. I think I want to stain the insides of the doors this color but I'm going to do
something different on the fronts. I'm not going to wipe this off because I want this to be a bit
darker. It's not quite dry yet but look how light it is. I'm just going to put this stain on and
I'm not going to wipe it. I'll just remove most of it with the brush because I need the color to be
darker than this. That color is definitely a bit more saturated but it still looks very natural.
I like it. So this is the next morning and I think it was a good call with leaving the stain on
because I like the color. It's looking nice. I think today is the day I'm finally going to finish
this. This is still a bit too long. I don't know who needs to hear this but I think that there is
time and place for proper sympathetic restoration but with most pieces that I work with they're not
museum quality pieces if you know what I mean. So just as it is the case with this one I'm
modernizing it a little bit but with the respect for the person who actually made it trying to
preserve the character of the original piece and making it more desirable and saving it from the
landfill at the same time. I think that's a win. So for the fronts I'm going to use this hardwax oil.
10% means that it's matte or not very shiny. That's in case if you don't know what matte means.
So now I'm going to use my brush to apply this and I just need to be careful so it doesn't get
on the other side because it's a different color and this is not going to be a huge difference in
color but this is what I'm going for. I want it to look natural. Yes you have mentioned it like
five times already. Not a huge difference but there is a difference. This is almost identical
to the original color of this wood which is what I want because I want to keep this natural
but at the same time protected. This is 800 grit abrasive pad and this will give me a silky smooth
finish. Even though this is fresh because I've just applied it you can hardly tell that there
is any finish on it and that was the point. I'm going to do the same to the drawer fronts
and to the panels on the sides. It's really sunny today and because hard wax can be cured by
UV rays I'm going to put everything outside so it can cure quickly. That was meant to be
the end of this sentence. Does it look natural yet? I'm actually going to make the feet a bit
darker but I'll do it off camera. Now I'm going to use editing magic to put the doors together.
Such a shame I can't do it for the whole project. So parts of this sideboard will be darker and
parts will be natural color. This stain ended up looking a bit patchy in some places
so I ended up mixing some hard wax oil with brown pigment to basically go over this thing because I
had to put some finish on it anyway and that seemed to fix the problem. And here's what I
was just talking about. I basically put the oil on all the darker bits because I had to put some
finish on them and as you can see it made quite a big difference. And now I'm going to deal with
the handles because there's a lot of paint on the metal bits and I need to get rid of the paint
before I do anything else. And to make it easier I'm using my lathe to take off the paint from
the wooden bits. I don't know if this is going to work but I don't have a better idea.
Okay let's try one that is really messed up. And by it I meant that there are lots of dings and
induced metal bits and I'm trying to make them flat. All right this might not be perfect but
it's much better than it was. I'm not gonna lie I was pretty impressed with myself.
So now I can put everything together and show you the pretty pictures. It's been such a cool project
and so much more work than expected but the end result is so cool and I absolutely love it.
Thank you so much for watching. Like, comment and hype if you haven't already.
Subscribe for more content like this and I will see you in the next video.
