Can you build a practical Everyday Carry kit using only items from Walmart?
That’s exactly what I set out to find. In this challenge, I build a complete EDC kit using Walmart gear—from multitools and hand tools to first aid, lighting, emergency supplies, batteries, notebooks, and everyday essentials.
The goal isn’t to buy the most expensive gear. It’s to build a kit that’s actually useful when you need it most.
This kit includes: • Multitool • Folding knife • Mini ratchet & sockets • Pliers • Flashlight • First aid • Waterproof notebook • Permanent marker • Tape measure • Zip ties • Matches • Electrolytes • Energy drink mix • Wipes • Batteries • USB flash drive • Charging cable • And more!
What would YOU add, remove, or upgrade? Let me know down in the comments!
If you enjoy practical EDC, tools, preparedness, and budget-friendly gear, be sure to subscribe for more builds, reviews, and EDC challenges.
This video demonstrates how to build a budget-friendly, custom Every Day Carry (EDC) kit using items sourced entirely from Walmart. For approximately $200, the creator transforms a fishing chest pack into a modular organizer, combining a comprehensive toolkit with administrative and medical essentials for use in a vehicle or backpack.
We are back with another review and today we got a special treat we are doing our monthly retail
Series and this time we went to Walmart to build ourselves a little EDC kit. What do we put in this kit?
well, hang on and we're gonna find out but
Straight out the gate as you can see the kit that I ended up going with is a little bit on the larger side
But the options that we had were fanny packs
Pencil cases zipper pouches or a zipper pouch for
Like I guess you could put sockets or tools in kind of like a banker bag
We're just like a little zipper pouch. Now. I already did something similar to that when we went to Harbor Freight
So didn't want to do something redundant. So I went a different route. I went with this Ozark trail
This is a chest pack for fly-fishing
I've removed a lot of the stuff that was attached to this and singed the ends
You can see there were some straps here that I cut singed those ends same thing right there
There's like something, you know, like down in there
I cut those as well with a razor knife just to have the pack be standalone
that being said this is the
chest rig
Part that got deleted. So this is no more because this is no longer a chest rig piece for fly-fishing
It does have a nice hook and loop system on the outside so you can stick patches out here, which is kind of cool
Or you can add extra storage on here another modular unit what you can see here from the side profiles
We got two compartments here and we have a mesh little bag part here in the back
We have a pull
System so we can kind of tote this with us or just leave this in our vehicle
Or maybe slide this into a backpack as a modular unit
It did come with some pretty nice little nylon ties here. So we left all that
the only thing we customized on the outside was we took
And deleted basically everything that wasn't this little hang tag and these four zippies and just removed it from the outer shell to clean
it up a little bit so
All in on this for around 200 bucks for this build and I'll show you everything that came in here and I'll show you the heavy
Hitters and the heavy hitter wasn't the pouch actually the pouch was around 15 bucks
For this chest really was like 1497 something like that. So let's do this. Let's do a little scatter pattern and then
We'll kind of check out what we have in each of the compartments. So for this one surprise surprise the toolkit
We did utilize the tackle box system that came with this and then this is the admin side
Which is gonna have all of our like basic tools and things we'll use pretty much every single day
So that's why I broke it down into the two compartments here
We got like tools if we need them and then we have like the everyday stuff and we'll show you which ones
We did for both now
If you also listen if I shake this around you don't hear a lot of rattling
Usually when you have a tackle box you have a lot of rattling
So let's start in that compartment. The only thing that's in this compartment is just the tackle box
Container that came with the kit. So
This these are some straps that came on the outside of this particular
Bag, but I figured why not reuse these to hold this completely tight just in case one of these or both these open up
And then all this stuff starts floating around
And becoming unorganized now as you can see here straight up. I have the dividers in here, but I also have tools
So you're like what the heck is going on here? This is like an optical illusion. It's not I'm using
Utilizing I guess you could say this grid system here to be able to pin down the tools
If that makes sense, so for example in the multi-tool compartment, you can see here. We have the Ozark trail
This is the multi force, but I have these cut down in half to pin down
the tool itself
Now the Ozark trail multi force. This was one of their premium options
Just like I guess you could say the store brand is Ozark trail hyper tough
They have a few other ones in there and Swiss tech is one of their particular brands that they sell that I haven't seen anywhere else
But Ozark trail here coming in with like a Leatherman
Competitor which is kind of cool. So we got the needle nose to apply. We got the wire strippers. Very very cool
We got some increments for measurement there on both rails pretty cool on that
In regards to the side tools that we got can opener bottle opener
Of course, we got a flathead pry bar a little combo there. We have some deployable scissors as you can see right here
Really nice little jabber with those scissors if you would I like having scissors on a multi-tool for me personally
Oh, we got that. That's right that locks in
I'm like, why is that not going anywhere and then let's flatten those out and then slide those down just like that
And then this side is gonna have a quarter inch bit driver
Which I'll show you here in a second. Here's some more pinned down tools. It came with
It came with
This which is an extension and I'll show you here in a second you can slide in here and
It's got a magnetic
End down there for the bit as well. So you get an extension with this
The extension unfortunately does not here. We'll do Phillips up
The extension does not fold into the compartment here even though there's space because we have the pliers, of course
something goes on that side, so
Quarter-inch flip bit so you get flat and Phillips on that belt clip didn't want to take it off
It's one of those ones built into the multi-tool where you take it off it's gonna leave a gap a non serrated blade pretty nice
See we got on this side. I mean this one is the file of the soft saw
We've got the saw blade which is looking like it's ready to rip and tear if you would into your flesh
If you're not careful, here's your serrated blade right there
And then this one's going to be the file
And the sharpener just pretty cool. Obviously, you can't sharpen the blades that are on this
You can sharpen other blades which we might have in here as well. So that's the multi-tool. And like I said those
What do we do? We add these two?
I think let me just kind of cut them and then I just kind of pin them down just slide them down in there and
then
I guess I just kind of slide them in there and it'll hold the the tool when you close the lid and
Forcibly pins those down
Now you saw something cool here that I had on the end. It's the little rubber
It's a silicone end here
Which ended up holding one of these had one of these in there on the blue and one on the red
Which I'll show you those in a second
But I wanted to address that why I took that off
It just kind of stops it from rolling around in the case if it does get any kind of movement
It just kind of stops it from rolling around which is nice now speaking of some fasteners
We'll hop from that fastener to this one, which has the same
Type of double-ended bit which is nice so you can interchange those. This is a six and one
So essentially this is kind of like the bit rack for this or we also have an extra bit on this for this
And of course we have the versatile stubby
This one has a track that it needs to go down the center there
And I believe it's five sixteenths, and then we got quarter inch drive
On here, and I guess you could probably use this so you got like one two three four five six
So you got two on here, but you might even have one here
If you needed to use that maybe I don't know we'll see
But for sure you definitely have a six in one little stubby here from hyper tough
This was a newer offering from them, and I wanted to grab it for this kick, so I thought it was extremely appropriate
Speaking of hyper tough
Here is the quarter inch ratchet with 90 teeth very nice
Super smooth, then I'd put some zip ties in here
I cut them in half so I got full size ones which makes them like a heavy-duty zip tie
Because if you had ones this small it would be super thin so this one is probably gonna be about the diameter
I'm gonna use on the reg so I cut five of them and toss them in here on an angle which is nice and those
sit in there really well with the
Screwdriver and the ratchet so let's pin those down again
So you can kind of understand how I did this little system here
So if you wanted to recreate something like this maybe not in this case
But maybe in a different type of tackle box, or maybe you want to do a tackle box challenge
Maybe you can do that now that you have a way to kind of keep everything from rattling around because
Lord knows this was in your truck rattling around
It would be a nightmare. You know I mean so speaking of adapters that came with this socket set here
Which will pop these off as well?
This is a quarter inch little adapter for you to put in an impact
Which is nice this kit can just have an impact with this and now you have impact sockets
Which is actually quite cool?
But I put the red one on the end of this so that it actually gives it a nice little snug fit in there
And it doesn't come loose, so that's really convenient plus that allowed me to fit both these
I kind of 69 them in there
And you can kind of see how it takes up exactly three so these aren't moving around a lot either
And what did we get on these racks well?
We got a full set of metric and SAE sockets we got nine sixteenths all the way down to three sixteenths
We got 13 all the way down to six so pretty cool on that
I think that's a nice little set right there
I mean if you're gonna ever use something like this like maybe you need to repair your car or something
That's when you maybe want to bust into a kit like this
But I think this is right now for tools as far as I wanted to go in regards to fasteners
I probably didn't need to include the sockets, but I saw that the bag inside was down that track the bag was so large
Make sure this goes down the track so the lid closes the way I want it to
Why not include this I didn't include stubby wrenches because that's what we're done and see we got sockets here
I didn't include the 6-inch water pump pliers that they got from hyper tough because they're a little big
I didn't include the 6-inch pry bar hammer nail remover combo
Cuz it just I didn't want to make this a tool kit. I wanted this to be an EDC kit or a truck kit or
Something that you could bring with you in a backpack or something that has tools if you need them
But also has like tools for you to be able to use and again
This is gonna be something where I'd probably tap into this a lot less than I would whatever is in the admin side here
so
Let's close this up. Probably the thing I'd be tapping into the most in here would be the stubby and the multi-tool
Those would probably be the two things I would use the most out of this tool kit
And then these would just be here for good measure same thing with the zippies
So let's slide this in here. So we got that nice base and then that zips up nice the half zip. That's right
Let me show you also if you end up buying this exact thing and you wanted to do this
I just basically stretched it around the hinge and the latch here so that it holds it from sliding off
I did that on the other side as well. And then like I said that slides really nice down in this little bottom area
So if you wanted to redo something like this or use the same kit to build your own
I think that works out really nice as a foundation. So in here
We do have some more hook and loop over here, which I have a USB C 240 watt charging cable
So I said you could stick that to the roof like that and then have your pad like that
So they're not overlapping and taking up a lot of room, but I got a six foot
240 watt USB C cable right there for recharging
We got a right in the rain notebook, which I'll show you that filing system and we'll show it to you now
I put a little band here the band came on
The charging cable for the flashlight
So the flashlight that I got came with a rubber band
So I said why not make my filing system now that I can in here. We have a dude wipe
Then we skip a couple pages and then we have two packets of electrolyte powder
Then we have two packets of caffeinated powder
And we'll skip a couple more pages and then we got the pièce de résistance right here, which is the band-aid that is
infused with
So this is like two-in-one basically for a kit and a must
I'm pretty much changing over all of my band-aids to these now
Because now I have a two-in-one solution instead of just having a regular band-aid
You have that other solution now, you can see here. The rest of these pages are unused
I don't have anything else going on in there
I use my notebooks for filing systems a lot, especially for things like this. I don't need these getting punctured
We're getting punctured and dried out especially these if you need those
And you don't want this stuff getting everywhere or floating around the package. I like to keep them pinned down there
I'll usually separate one or two sheets just so that they're not all pinned on top of each other
And it keeps it a little more flat
I also try to keep to smooth out the the powder so that it's not lumpy in one section
And then as you use these they're consumables you can replace those and we'll talk about consumables here in a second
There's a great thing about building these kits is there are consumables
So as you can see here
I ended up zip tying with one of my zip ties that I bought from hyper tough
I zip tied this to kind of keep this like a pinned down pouch
Versus something where if I turn this like upside down is all my stuff gonna fall out or float around in the package
No, so I zip tied that down
That's a little custom thing that I did there just to kind of keep it
Now how I did this was I packed all the stuff on top
With how I'd be like basically grabbing the stuff and the stuff I'd use the least is on the bottom
So as we get to the bottom, we're gonna get to the stuff I use the least so straight at the gate
I found this really nice 1300 lumen flashlight from Kodiak. What's cool about this is it is an arc-filled alternative
USB C charging on the side, but not quite an arc-filled alternative. We have high beam. We have a low beam
We have eco beam, which is like, you know, you're camping night time reading a book or something
And then you have the UV light which is on the bottom here
And then, you know got the UV light doesn't that or it does have the the laser
But it's not all on this spin wheel to unlock the laser
You have to kind of know the trick which is you're gonna tap double tap the button, which it doesn't actually tell you here
To access the laser. So if you don't know you're not gonna know but it's got the third feature
It's just not as readily apparent as the arc-filled
And that is the crux UV from Kodiak next up. We got
We got a sharpie, of course a nice scribe
Then we grabbed this really nice little flipper from Ozark Trails eight bucks
It's got a little lock release their non serrated blade
Honestly quite nice comparative to some other knives that are on the market there for eight bucks
I can't beat that and it kind of matched the notebook
So I said, you know what that's something that we're gonna have to get speaking of matching the notebook
We've got the other thing the right in the rain pen
to go with the notebook now, I'll be a
Fourth right here with everything that we got here
Most of the stuff that I got was either in the hardware section or another department
The right in the rain pen and pad the the knife and then the multi-tool I got in camping
You would think most of the stuff I would have gotten camping or in the pouch
But other stuff most of stuff I got in other departments
And I'll talk about that in a second we got a six-foot hyper tough
a six-foot hyper tough
It doesn't have fractions on there
But it is a nice little six foot tape measure which makes a nice compact little pack in here
Next up we got is let's grab
The next thing that's sliding out. We have a 32 I believe gigabyte flash drive. Yep 32 gig flash drive from on
Grab this because what kit wouldn't be complete without
Some tech stuff we live in a modern world
So have some having some tech stuff in my kit that I would actually use on a regular basis
It's kind of a necessity next up. We got are my last two things in here. We have some waterproof matches from go fire
They're basically just matches that are dipped in wax. They got two striper strips on that pack, which is pretty nice
I like having a fire implement, especially if I have room for it
Now the last thing we have in the pack is some extra strength acetaminophen tablets
Put that over there
And like I said, let me grab that the toolkit now that we have everything out of this pouch and the pouch is pretty much tapped
So that's everything right there that we got inside the Walmart EDC kit
We have a little bit heavy on the tools, but we had the room so we added the full socket set
I would say I'd use these over a wrench set a stubby wrench set or a pry bar hammer or a
6-inch water pump plier. I think this little kit is a little bit more convenient and useful and purposeful for me personally
So like I said, you might build your kit differently if you go to Walmart
But this is how this is kind of how I built mine out for me
Personally like, you know, I bought the kit so I might as well build it out the way that I would want it
And that's how I did here. So
This is yes some admin stuff medical we got tools
How would you break down your kit if you were going to Walmart? What would you buy? What type of pouch would you start with?
Do you start with the pouch and then put everything else me personally? I just kind of did a
Clockwise sweep of the store and to be honest with you. It was kind of a nightmare
I don't shop at Walmart, but when I went in there to buy this stuff
it's been probably over a year since I shopped at Walmart and
Everything's under lock and key
so when I went over to like the
Medical or first aid area like some of the stuff was locked up over there that I was like, wow
If I needed that stuff, I would probably have to go get someone then I go over to the hardware section and everything's locked up
Like the guy had to go into like every single case
Along the one aisle so just grab like one thing from each one and then same thing was like the flashlight was locked up
Separately and then the knife was in a separate case and then the multi-tool
is in another one and then I go to electronics and
You know the $5 32 gig flash drive is under lock and key
So I'm checking out like three times
Before I even get to the main event, which is the the end register, you know what I mean?
so I didn't have much when I went to go to the main register, but
Yeah, it was kind of a it's kind of a nightmare honestly putting all this together
You know
You got loss prevention eyeing you up and down just because you're trying to strategically plan a kit on the aisles
You know what? I mean? It's just like a weird experience compared to the other
Retail establishments that we've already been to building kit. So we'll see how other ones handle my little thing
Going forward, you know going in there and kind of strategically looking at stuff and kind of laying them out laying out my my parts
In the cart, which is how I do it
I
Kind of lay it all out so I can kind of see it just kind of like this like a scatter pattern and then I kind
Of see what I got and I kind of put stuff back if I don't want certain things or I replace certain things
Like at first we went through hardware. We did a sweep and I grabbed the six inch water pump pliers
But then we found this multi-tool which I was like if they only have like eight or nine dollar cheap multi-tools from Ozark Trail
Then we're just gonna go with the water pump pliers
We're gonna skip the multi-tool all together, but they had a premium option. So then we put the water pump pliers back
So stuff like that happens a lot and I don't want people thinking I'm doing funny business in the store either
But Walmart was definitely high alert with money business
So keep that in mind if you're gonna go in there and start building and you know piecing together kits
You might get some people come up to you asking what the heck you're doing. So
That happened to me. Anyway, once you let me know down in the comments below. What do you think of this kit?
Is it too big? Is it too small? But again, I'm limited to like what they have there
So if they don't have like I don't want to keep buying the same pouch
At every single store the zipper tool pouch or the banker bag and
Stuff everything in there and everything's floating around. I wanted to grab something that was a little bit more modular
So I like I said, I want the fishing pouch, but what do you think about this kit?
And how would you do it differently?
Again, I put these together to get your juices flowing on what you would do to make the kit yours and how you would add
Things differently in here. Would you spend $200 on the kit?
And all that down in the comments below if you like this video give it a thumbs up
More content like this subscribe for more and have a rest your day