Learn to Paint Sparkly Water Ripples with Watercolours

G-Art
6 followers
3 Video Views·Jul 27, 2026
TOOLS:
Brush: Princeton Velvetouch round size 8, size 5
Paper: Arches 300gsm Cold Pressed 100% Cotton
Pencil: Pentel Sharplet
Masking Fluid: Marie’s
AI Generated·May contain errors
Video Summary
AI GeneratedNia demonstrates how to paint a sparkly water ripple with lily pads using watercolors and acrylic markers. The process covers sketching for perspective, using masking fluid to preserve highlights, layering cool and warm tones for depth, and applying holographic accents to create a shimmering, light-filled effect.
Hi everyone, this is Nia and today I'm going to be painting this glittery or sparkly water ripple.
I've enjoyed the last time I've painted water with the addition of accents from acrylic markers so
today I've decided to do another water painting. I came across this picture and I love the lighting
in this. The sparkle almost looks glittery or holographic on a fairly simple composition so
I wanted to give it a go. I've sketched out the main water source and the lily pads and I just
want to make sure that the ovals on the lily pads are a bit more flat towards the back and a bit
more round closer to the foreground to give a bit of perspective. I've simplified the lily pads as
ovals to make the sketching easier and I'm not really following the reference accurately. I just
want to spread out the ovals in different sizes according to the frame that I have since mine is
square and the original image was actually 16 by 9 ratio and I've actually cropped the photo here
so it's easier to visualize even though it's still a portrait ratio. I wanted to include some of the
features shown here. I also made sure that the ovals are either touching each other or overlapping.
This way the positioning looks more natural and once I'm happy with the layout I add a cutout for
the lily pads to make them look like little peckmen and I also made the edges a bit frilly
to make them look more organic. Here I'm just repositioning the water making sure that it's
center. I also made mine curved whereas the original is more straight. This is just preference, it's up
to you how you want to position yours. Once I'm happy with the sketch, to make painting the water
less of a hassle, I'm going to mask off some of the lily pads. This way I can paint over them and
I like to apply the masking fluid with a silicone brush so I can get to the tiny little corners.
You can cover all the lily pads but I'm going to leave the ones at the back since they're going to
be in a dark spot anyway so if I accidentally paint over them it won't be too much of a big deal and
for the ones in front I feel like I can avoid painting them a bit easier compared to the ones
in the middle and the reason why I'm doing this is just because my masking fluid is very old and I
didn't store it properly so it gets very sticky and hard to take off compared to when I first got it.
My room gets very hot and sunny from what I've read you're supposed to store masking fluid in a
cool dry place if not it spoils easily so I'm just limiting my usage even though this is still a lot
but if your masking fluid is fine then I would suggest for you to just mask all the lily pads
and this water source. So once I'm done I'm going to wait for the masking fluid to completely dry
you'll know if they turn translucent and next let's go over the colors. Firstly this is Vermilion
by Holbein, Permanent Yellow Deep by Holbein, Indigo by Schmincke, Permanent Green by Holbein,
Azure Blue by White Nights and for the accents I'm also going to use my Enmi markers.
These are acrylic markers for the water. I like to use B9 which is really really really light blue
and the number one is just pure white. I tried to recreate a simple holographic effect and for the
colors I used B1 which is a blue, R5 which is like a pinkish red and Y5 which is a light yellow.
I'm going to start by painting the lily pads which I didn't mask off and for the base color
here I'm using a mix of Permanent Green with a little bit of Indigo and around the sides I want
to add some warmth. This is from Permanent Green with a bit of yellow and I also added some very
tiny dots around the edges with a medium consistency of Vermilion. You can see I like to start with a
very light consistency for the lily pads then while the surface is still damp I like to dot in
a little bit more pigment. For the lily pads at the back I'm going to add a bit more Indigo. I'm
just dotting it in while the surface is still damp because this will be in shadow. As for the lily
pads in front I'm going to add more warmth from the sunlight and this is with the addition of
Permanent Yellow Deep. And that's it. Next we can start painting the water and I'm starting with a
light consistency mixture of Azure Blue with a touch of Permanent Green. As I get towards the
bottom where the light is hitting I want to add a little bit of warmth and this is with the addition
of Permanent Yellow Deep. Towards the corner I also want to build up on the value so here I'm
just using the same mixture in a slightly thicker consistency. While the surface is still damp I'm
also going to add a little bit of Indigo around the edges. This is to create a vignette effect
so the focal point will land right in the middle where it'll be the lightest area and at the top
you can see this is closer to the area of the shadow so here I've added more Indigo into the
mixture. If I want the color to be greener I would add some Permanent Green or Permanent Yellow Deep
and towards the right hand side where the distinct cast shadow will be I just use a really thick
consistency of Indigo and Azure Blue. I feel like the cast shadow is slightly lighter at the bottom
here so I've added a bit more Azure Blue compared to the Indigo and I'm also going to soften the
transition while the surface is still damp. Now I'm going to add bits of cast shadow underneath
the lily pads and depending on the base color the cast shadow will be darker if the base color is
darker and I'll use a thinner consistency for the cast shadow of the lily pads on the light
background. Here I want to start shaping the ripple. I'm using the same mix as the base but I like to
use a thin consistency at the top and a slightly thicker consistency at the bottom for a more
saturated base. Once I'm done I'm going to go back to the top part to build the water reflection.
On the left the color is a bit more green and saturated so I've used a bit more Azure Blue.
You can also add a touch more Permanent Green or Permanent Yellow Deep depending on how green you
want it to be and on the right hand side where there's a cast shadow I'll use a thick consistency
of Indigo for a darker and more muted tone. I'm also going to darken the bottom corner using
Indigo with Azure Blue. I use a slightly thicker consistency around the corners and then I just
soften the transition using a damp brush so I don't accidentally darken the center too much.
Now going back to the top and the left side the base color should be completely dry by now and
I'm going to use the same color in a slightly thinner consistency to start painting on some
of the texture for the ripples. Then as I slowly build the color I'm going to add more green to
separate this side from the cast shadow on the right. This is from the same mixture with added
Permanent Yellow Deep and because I want this part to be very saturated I've used a really thick
consistency. For some of the color variations then I've just dotted in a touch of Indigo and for some
of the textures on the bottom right you can see they're much more subtle so I just used a very
thin consistency. I like to add variations in the line weight for the reflections. I feel like some
areas should have thinner lines than others and I want to make sure that whatever lines I make
it follows the roundness of the ripple even if I add additional curves to them. I want to slowly
build the value of the ripple here. The reflections would actually benefit from the contrast in both
value and saturation so try to be more brave when you're painting them on. Whenever I've increased
the value and saturation for certain spots I want to adjust the surrounding area so the value is
balanced all throughout so it's okay to go back and forth on your painting to adjust things along
the way. I've forgotten to paint the center ripple so let me just add it in. This is very important
so the water source in the middle and the splatter will have a nice contrast later on.
I also want to add in a bit of texture and detail to some of the lily pads and after this I feel
like I've established enough texture for the water so I'm going to take off the masking fluid.
This took me quite a long time to take off because I was scared of damaging the paper if I rub it too
hard and by the end of it I think the surface of my paper was still a bit sticky so my brush couldn't
glide softly across the paper but for this case I think it was still okay because I don't think
I need to paint too much on top of these lily pads and the water. I just started with a thin
consistency of permanent green with permanent yellow deep but on the left I tried to use a
slightly cooler blue so I've added a touch of indigo or you can also add some azure blue.
Then while the surface is still damp I like to add a bit of texture by painting a slightly thicker
consistency on top while leaving some areas as well as the edges with the base color. There's a
line of cast shadow from the water and I'm just going to paint over the lily pads then I'm going
to add a bit of accent color to the painting. At the moment the colors are very green or bluish
green which are cool colors so here I'm adding yellows and a touch of vermilion to the edges of
the lily pads for those warm accents. Now for the water source, I love painting this part. I like to
take in the color of the background and paint it in between the area while leaving a bit of white
on either side as well as some lines in the middle. Then I'm going to add some dark harsh lines
as reflections of the shadows around the water. This can be painted in a very abstract way so
there's really no need to overthink this part. When you're painting on the dark lines make sure
that the surface is completely dry so the edges of those lines can be very sharp and distinct.
You can see some water droplets on top of the lily pads and I'm starting with the base here.
I'm just adding a blob using a thin consistency of this dark green then I'm going to leave it
dry before adding on the highlights. It looks a bit odd now but while I wait for it to dry I'm just
going to paint on the glittery ripple. I'm starting with a really light blue here. This color is also
not the most opaque. There's a bit of transparency which is why I like to use this as a base before
adding the white highlight at the center to make it look more glowy. Once the color dries you can
see that it has slightly darkened and this is where we come in with some white to paint the
center of those large highlights to give a brighter sparkly effect. To help with the movement of this
platter I like to add some dots coming out of the water on the side. I sometimes like to paint it on
diagonally as well and I also add small dots to the ripples or dotted lines in general just to add
some more sparkly look to the light reflection. In the reference there are a bit of color variation
to the light. This is what helps make it sparkle as well. Some areas almost look holographic
and this is where the pink blue and yellow hues come in. I like to add dots in different sizes
then I like to smudge the colors to make the edges softer. I like to also add them near the
rippling light reflection before it goes to the bright white. And by the way if you don't have
access to acrylic markers you can also do this with some gouache paint. I just find the application
much easier with these markers since I don't have to mix the paint. Now for the water droplets on
the lily pads I like to add a bit of shadow right underneath those ovals or those blobs.
Then I like to add in some highlights on the top right hand side to follow where the light
source is coming from. Here I'm just adding some swirly lines for fun as extra movement and
reflection and from here I just want to keep balancing the overall values as well as adding
more of the three hues to the highlights. Once I'm done with everything I'm going to unmask the edges
to reveal the painting. And like usual I can't stop myself but to add some tiny little things
just some extra dots after unmasking the sides. I feel like the lily pads could be much lighter
on the right hand side now that I'm looking at the reference as a thumbnail picture it's just
more evident. But yeah sometimes when you use references I think it helps to zoom in but it
also helps to zoom out to see a better overall view of the colors and such. Anyway like usual the
list of tools as well as my social media links will be in the description box. Thank you so much
for watching till the end and I'll see you guys in the next one. Bye!
