In this video I’ll be creating an ecosystem terrarium for dart frogs that even has a working waterfall! I’ll take you through the step by step tutorial and cover the full build from start to finish, hardscape, drainage and substrate layers, the waterfall system, planting, and the finishing touches that make it feel like a real slice of rainforest.
In this video I'm going to create a rainforest style ecosystem for these stunning dark frogs
that even has a flowing waterfall. Let's waste no time and jump straight into the build.
I'll be using this glass tank that I made myself from greenhouse glass.
It's a euro style vivarium with vents on the bottom and top for good airflow.
I'll try and find a link to something similar and leave it in the description.
The first step is to get a background installed.
Over the years I've tried many different backgrounds but one that I really like
is using this compressed cork board. This is specific for terrariums and it is safe for
live creatures. After taking a few measurements I'm going to cut it down to size. It doesn't
need to reach all the way to the bottom as the drainage layer and substrate will take up this
space. With the back done I'm now going to cut both sides as well. The next step is to get these
panels secured onto the glass. The best thing to use for this is going to be some aquarium silicone.
Don't just use any old silicone, make sure it's labeled as aquarium or fish safe.
After applying a generous amount I'm pressing the panels onto the glass starting with the
back piece. I've wedged in a few cutoffs which will help anchor them in place whilst the silicone dries.
A bit of time has passed since the last clip and I've moved into a new house and created this new
ecosystem room. There's been so much to do that I had to push this project to the side but now
it's time to pick it back up and I'm really excited to keep on working on it. I'll add some detail to
the background later but for now I'm going to start working on the hardscape. As for what I'm
going to use I've got a few large pieces of this cork bark. Compared to some other hardscape options
of this size it's really quite affordable and yet does not lack in detail or looking natural.
After a little while of experimentation I quite like how this piece sits and I think it'll be a
great place to start and build from. To secure the cork bark in place I'm using some expanding foam.
After about 20 minutes the surface has dried enough to touch but it's still wet inside.
This is the perfect opportunity to press and shape the foam before it cures.
It's the next day and the foam has dried and the cork bark is locked in place nice and solid.
I can now build on the hardscape with a couple more pieces. Now that the foam has dried I'm
going to start carving it down and start thinking about the water feature. Because I shaped the foam
whilst it was still wet it's got the basic shape and there's really not much carving to be done.
The most important thing is is that the shiny surface layer of the foam is completely removed.
It needs more work but it's gonna do for now. So I want a waterfall that flows down high from
the scape into an open section of water at the base. My plan is for the waterfall to start behind
this branch at the back, flow down to the right between these two branches and then to an open
pond in the bottom left. I'm using a marker pen to draw out the ideal flow of the water.
I find this helps visualize the flow and makes carving much easier. That's the upper carving
done for now but I still need to create the bottom section of the waterfall. Before I do that I do
want to work a little bit more on the background as it's looking quite flat and boring. I'm going
to use this wire brush to create some depth and texture on the cork panels. Doing this should
make the cork panels look like a much more natural background. I'm not putting too much time into it
as the majority would be covered in plants anyway. I don't know how well you can tell on camera but
it's looking a whole lot better. As for all these shavings I'm going to bag them up and save them
as I'll be using these to cover up the expanding foam later. Next I'm going to install the drainage
for the terrarium. For this build I'm simply going to use some coarse filter foam. I've cut it to size
to fit the base of the terrarium perfectly. The first thing that I'm doing is placing a sheet of
cling film over the filter foam. This will ensure that the expanding foam does not stick to it.
I want the waterfall to flow down through these two pieces of cork bark.
To achieve this I'm going to need to add some supports for the foam to hold on to.
If I don't it's simply going to fall straight through the gap onto the filter foam.
I'm pushing in a bunch of these toothpicks into either side of the cork bark to create some
scaffolding. It might not look the neatest but it should work and hold the expanding foam up whilst
it cures. Now that the expanding foam has cured I can keep carving it down until I achieve the
shape of the waterfall that I'm after. Next I'm going to remove the filter foam from the base
and clear up any expanding foam chunks left over. Now I can start work on covering up this expanding
foam to make it look more natural. I'm firstly applying some black silicone to the foam and
then using my finger to spread it out as best I can. Now I'm going to take the shavings from
the cork background and sprinkle them on top of the wet silicone. I'm making sure to push down
firm so it sticks down nice and well. I can now use an old paintbrush to brush off the excess and
then work on the next patch. I highly recommend doing this stage in small patches at a time
opposed to larger ones. The last thing you want is for the silicone to start drying before you can
get the cork bark on top. There are a couple small gaps but for the most part the foam is
completely covered and I'm really liking how it looks. After waiting a day for it to dry I can now
clean up the tank as best I can before getting the filter foam drainage back in place.
Now I'm using a sharp blade to cut out the rough shape of the pond that the waterfall is going to
flow into. This is the benefit of using filter foam in a scape like this one as it's really quite
customizable. To bring a more natural look to the pond I'm going to place in some lava rocks around
the perimeter. These not only look a whole lot better than the jagged edge of the filter foam
but they'll also help hold back the substrate that I'll be adding later. Right now they're
just balancing which will be no good long term so I'm going to lock them together with the superglue
and tissue method. I'm simply wedging some tissue between the rocks and then soaking it in some
liquid type superglue. It dries fast, strong and best of all it's animal safe. Now that the rocks
have been locked together to create a retaining wall I can now start working on installing the
pump for the waterfall. Here I've got a small USB pump which should be perfect for this size water
feature. The tricky part is installing it in a way that lets me access it in the future if it ever
breaks down and needs replacing. I've cut out a small square in the foam right in the corner of
the tank that the pump fits nicely into. The USB plug then fits through a small slit that I've cut
in the mesh where it leads outside the tank. With that done I'm now going to work on the tubing
which will get the water from here to the top of the waterfall. I'm starting by installing a 90
degree push fit in followed by some 10mm tubing poking out the end. Now I'm going to push in
this silicone tubing into the 10mm tubing. It fits nice and snug which is great. This silicone
tubing is perfect as it bends nice and easy without kinking or folding over on itself.
This makes it nice and easy to get it in the perfect position right at the top of the waterfall.
The tubing leads nicely right to the top of the waterfall and will be nice and easy to hide
later on with moss and plants. I'm using some toothpicks to pin it down in place before gluing
it down with some super glue. Before moving on any further I want to test out the waterfall to
make sure it's working properly. The water follows the desired path perfectly which really is a
relief to see. The water does look like it's flowing a bit weird and that's just because
the stuff that it's on top of is bone dry. After getting it saturated with water and adding some
filter foam at the top for a smoother outflow it's looking a lot more natural. I can already
picture different species of moss and plants growing either side with frogs jumping in and
out. With the waterfall test successful let's carry on with the build. Before I can get the
substrate in I need to plug some holes in the retaining wall so it doesn't end up in the water.
This is easy enough to do by ripping apart some filter foam and plugging the small gaps.
I've also cut out this section that's going to cover up the filter and stop anything unwanted
from getting inside. I'm going to build up the drainage layer slightly higher so the substrate
won't be sitting in water. For this I'm just pouring in a few litres of this fine leaker.
I'm going to leave the area around the filter clear just so it's relatively easy to access.
For the substrate I'm going to keep it extremely simple and just use some sphagnum moss.
This stuff is great at growing plants and works well as a standalone substrate.
It's also widely available and relatively cheap which is always a positive. I'll try and leave
a link to some in the description as well as most of the other materials used. With the substrate in
I'm going to work on the pond area a bit more. I'm pouring in some fine sand followed by some
gravel to add some detail. Now I think the terrarium is about ready for planting. That's
where it's going to really start to take shape and come to life. The first plant to go in is
going to be this bird's nest fern. I really like its wavy leaves and I think it's going to add a
nice jungly look to the terrarium. Before planting I've taken it out the pot and removed as much of
the soil as I can. As for placement I think it looks great wedged between these two branches
of cork buck. Its roots aren't in the substrate but I think it's close enough to the waterfall
that there'll be constant water dripping through them. Next I'm going to plant in a few different
climbing plants throughout the tank. This first one is a really nice philodendron species that
has some beautiful velvet leaves. It's super easy to grow and I think it's going to look great
climbing up the cork panels. I've snapped some toothpicks in half and I'm using them to pin the
cork panel with its own roots but this is going to hold it up for now. I'm planting another
philodendron over on the left side pinning it in place same as before. The next climbing plant that
I'm going to add is this ficus. I've always had great success with this plant in terrariums and
I really like the shape of its long narrow leaves. Once established it really does start growing fast
so that is something to keep in mind. I'm planting it in the mid section of the waterfall and adding
some sphagnum moss under the stem to keep the roots hydrated. I think this peperomia will
look great growing at the base of the terrarium. The majority of the plants in this tank have a
jungly coloration so these silver leaves will add a nice contrast. Next I'm going to plant in some
macgravia climbing up the cork panel. These are one of my absolute favorite species to use in
terrariums like this one. I'm using some more toothpicks to carefully pin it in place whilst
it gets established. The next plant to go in is this stunning begonia. It thrives in low light so
I'm planting it at the bottom of the tank in some shaded areas. Now I want to move on and start
adding some plants around the pond at the bottom as well as the sides of the waterfall. Around the
pond I'm planting in a number of different anubias and bucephalandra species. These are aquatic
plants that grow really well at the water's edge. To plant them I'm wedging them inside gaps between
the rocks or using toothpicks to pin them in place. They'll get their nutrients from the water flowing
through their roots. Next I'm going to plant in some of this oak leaf creeping fig so it's growing
and climbing up the cork bark. It's leaves stay nice and small and will add some nice detail to
the terrarium. It is however a slow grower so it's going to take some time to get established.
I do want to plant some moss next but first I'm going to fill the tank up and get the
waterfall flowing. It feels great seeing the waterfall flowing through the tank with all the
plants inside. A tank like this isn't complete without some moss so that's what I'm planting
next. This is an aquatic species known as spiky moss. As it's an aquatic species it is prone to
drying out. This means I need to try and place it where it's in constant contact with the water.
Even if just a small part is in contact it should wick up the water and keep the rest of the moss
hydrated. After placing in a few floating plants I think that just about does it for the planting.
I haven't completely packed the tank full of plants and I've left lots of space for these
ones to grow in and establish. Packing the tank with plants right away does look great and you
almost get a finished look from day one. The problem is as soon as they start to grow the
tank becomes overcrowded and they start to compete for resources like light and nutrients.
I much prefer to add slightly fewer plants to let them grow, fill out the space and turn the
tank into their own. The first creatures to go inside this tank are these tiny bugs known as
springtails. These little guys are like the cleaners of the ecosystem. They'll eat things
like mold and decaying matter and turn them into nutrients that the plants can then use to grow.
They'll also serve as a constant source of food and enrichment for the frogs.
Now before I introduce the frogs I want to let the tank grow in and establish for a good while.
Here we are 150 days later and I'm glad to say that this ecosystem is healthy and thriving.
In this time the plants have really settled in and started to shape the tank like I hoped they would.
One of the highlights is the macravia that's climbed almost right to the top of the cork panel.
My only regret is not planting more of these as I think they look absolutely stunning.
Another plant to highlight is the oakleaf creeping fig. It's been slowly climbing and
creeping along the cork branches and I absolutely love the detail that it adds to the scape.
As for the philodendron it's been doing really well and has got lots of new growth throughout
the tank. I don't know about you but I think these dark velvet leaves suit the scape perfectly
and help enhance the rainforest feel. It's starting to spread to the left which I think
is great as it's looking a bit empty over there. The waterfalls continue to flow perfectly and the
moss and plants around it really are thriving. In nature plants like Anubias and Bucephalandra
often grow in conditions similar to this. They're usually found on riverbanks right where water
meets land, thriving in the high humidity with water constantly flowing through their roots.
I think this setup really helps emulate that and is the reason why they're doing so well.
I can't not mention this begonia growing around the pond. It's doing so well and its stunning
dark green leaves add so much detail and interest to the lower parts of the scape.
I think that's enough of the plants so let's get the doors back on and the frogs inside.
The first one went in nice and easy jumping straight out of the tub and under the dark parts
of the hardscape to hide out. The second did give me a bit of a scare and decided to scale the glass
before jumping down and hiding. I've had these dart frogs for a good number of years now and
they really have been a joy to keep. They're always up to something whether it's begging for
food of the glass or hunting for springtails and other small bugs throughout the tank.
This one discovered some springtails on the Anubias and wasted no time digging in before
jumping in the pond for a swim. Other than the small critters that they hunt throughout the tank
their main diet consists of fruit flies which I dust with calcium powder. This ensures that
they're getting the right nutrients to stay healthy and strong. In the wild these frogs would be highly
poisonous but that's not the case in captivity. Because they're not consuming the bugs that give
them their toxins they're not poisonous whatsoever. However this doesn't mean you should hold them or
pet them despite how cute you think they might be. Like the majority of frogs they've got very
sensitive skin that can absorb chemicals from our hands straight into their bodies. Handling should
be strictly limited to necessary circumstances such as moving tank or health reasons. These tiny
creatures are such a joy to keep and having them inside a tank like this one only makes it better.
I really hope you enjoyed and found this video useful and I'd love to think that I've inspired
you to try something like this yourself. Be sure to like and subscribe if you enjoyed and as always
thank you for watching.