First Step to Fixing an Ugly Lawn - Where to Start
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive guide to renovating a neglected, weed-infested lawn. The speaker emphasizes that the \"golden rule\" of lawn care is eliminating weed competition before applying fertilizers or seeds, sharing a two-step chemical approach to transform a \"garbage lawn\" into a professional-looking space.
Comments are disabled for this video.
If you think your lawn looks bad, take a look at this.
Grass that's almost three feet tall,
weeds absolutely everywhere.
This place has been neglected for years,
but in just a few weeks with a little bit of effort,
I was able to turn it into this,
and this looks so much better.
Now, if you watch my channel before,
you know that I've already done this job at my old house,
and it started off with another garbage lawn,
but in just a short time,
that thing almost looked like a golf course.
And in this video, I'm gonna share the secret to my success
so that you can do this job yourself
no matter what kind of lawn you're starting off with.
Here's what my backyard looked like at the beginning,
and as you can see, this was even worse than the front.
So to begin any lawn care renovation using my method,
you need to always follow the golden rule.
Remember that your lawn is kind of like a forest.
It's got all kinds of different plants,
and of course, lots of weeds as you see here.
So the first thing you need to do
is get rid of the competition,
and that means killing off the weeds.
Because if you kill the weeds,
all you will be left with is grass,
and you'll be on your way to having a much better lawn.
But how do you actually kill those weeds?
This is so important because this is a step
where most people fail.
They wanna go out and just buy fertilizer,
throw down some vitamins on the lawn or something else,
and all that's gonna do
is help fertilize the weeds and your grass.
I'm gonna recommend two different approaches.
You can use the product Tenacity
that I've shown you in many of my other videos.
It's labeled for more than 50 weeds,
including all the hard ones.
Crabgrass, Dallas grass, clover, dandelion, and tons more.
You can spot spray your weeds,
and you will be on your way to a better lawn.
But there is a time you might wanna consider another approach
and that's if you have a lawn like mine
where you've got literally more than 70% weeds.
Spot spraying might be a little bit more time-consuming
or it may not be the best way to initially hit your lawn.
So I'm gonna recommend an even easier approach
that you can do as your first step
that will help you knock out the weeds,
and that's to use this product called Surge.
This is part of a fertilizer product made by the Andersons,
and this is one of the best products on the market
that gives you both weed and feed.
The other benefit here is it's a granular product,
so you can just put it in your regular lawn spreader.
You'll apply this stuff just like regular fertilizer,
except when those granules land on a weed,
they'll get absorbed into the leaves and they will kill it.
And weed and feeds aren't new, but they are not all the same.
They have different chemical formulations,
and I've used Scott's products in the past
with really poor results.
This Andersons product is a professional grade one,
and it includes the chemical called Surge,
and that is a really good track record
for getting rid of all kinds of weeds.
It's just a single step.
You just put it in your spreader, walk around,
you'll be fertilizing your lawn,
and you'll be killing off the weeds.
And if you've got a really bad weed problem like I do here,
this could be an effective way to get rid
of the most weeds possible
for the least amount of effort and time.
Now you should always read the label,
but here's a few tips for applying this stuff.
You wanna do it earlier in the day
or after you've watered your lawn
because you want those grass blades and weed leaves
to be a little bit wet.
This way when you're putting this stuff down,
they have the ability to stick right to the leaf,
and that's what makes that weed killing happen.
Then the tip is around mowing your lawn.
You don't wanna mow your lawn any sooner than two days
before applying this stuff,
and then once you apply it,
you don't wanna mow your lawn for at least four to six days.
But you can water your lawn normally
within 24 hours of applying this stuff.
It does have some limitations.
You can't just keep applying this stuff
because it is a weed killer and a fertilizer,
so you're gonna be limited to really using this
maybe once or twice a year.
But as an initial kind of bang on all those weeds,
this is a great way to hit your lawn,
especially if you've got a huge amount
of weed cover like I did.
But the problem is all weeds don't just sprout up
at the same time,
so there's no way that Surge product
can completely kill them off.
That's when you need to come up with another solution
to get rid of any other weeds that show up down the road
or later in the season.
Or maybe a lawn isn't a total dump
and you've just got some areas of weeds
that you wanna deal with.
Well, that's when you're gonna wanna look
at the product tenacity that I've shown you
in my previous videos.
Unfortunately, they've actually updated
the product this year.
Formula is exactly the same
because the product works so well on weeds,
but what they did is they updated the bottle.
They used to give you a kind of needle
that would let you measure the solution,
but now you just squeeze this bottle
to get the exact amount you want.
Now, I've also linked my tenacity video
in the upper right-hand corner
and that will give you every single step
to use this product effectively,
but it's really simple to use.
You just look at the bottle,
measure the amount of tenacity that you wanna make.
Here I'm gonna use a brand new sprayer
I've gotten from this company called Tomahawk.
This one holds five gallons.
All I need to do is squeeze the tenacity bottle
until that guide on the left reads just under five
and then it will give me the exact amount
of tenacity I need.
And this is a professional grade product
so you do need to apply two other things in the mix
to make this stuff work.
Tenacity by itself can't really stick
to the leaves of plants,
so this other product called the surfactant
is gonna allow it to do that job
so when you spray it,
it'll stick directly to the leaves
and then it can kill off the weeds.
It doesn't kill your grass,
it just kills the weeds.
It can literally kill weeds
that are in the middle of your lawn
without damaging the lawn at all.
The problem with spraying this stuff
is you're not gonna be able to tell
what you've sprayed or what you haven't sprayed,
so it's easy to fix that problem
by adding a food coloring to the mix.
Now this isn't just the same food coloring
you get at your store,
this is more concentrated
and it's a lot cheaper.
And with this all mixed in,
you're ready to go.
You wanna close up your sprayer
and then give it a good shake
to make sure that everything is well mixed.
Tomahawk spray uses a battery
which means I never need to pump it.
It's also got a really high pressure pump inside
and that's gonna help me apply a lot of product
with the least amount of effort.
You can of course use other sprayers on the market
but you've gotta be careful.
If they apply too much chemical
or the spray droplets are too big,
you can actually over apply it.
Here this sprayer that holds almost five gallons
is gonna be perfect for my lawn
because I've got a lot of area to spray.
I'm still doing this
even after I applied that granular surge product
but as you can see,
the amount of weeds in my lawn
are easily less than half of what I started with.
Tenacity is always my go-to product
for killing off any weeds that pop up
or if you just wanna do spot treatment,
you can continue to use Tenacity
for your entire lawn.
Now you can already see on my lawn
I've got a lot less weeds
because that surge product
really knocked a lot of them out
but now I've gotta go and spot spray anything I see
and if you miss stuff,
it's not a big deal.
You can always spray again later
but you wanna take your time
to try to spray as many weeds as possible.
As you're spraying,
it is so easy to miss where you've previously sprayed
and that dye is gonna kinda turn the grass a bluish green
and it makes it obvious to know any spot
that you've already sprayed.
Overspraying will not help you.
In fact, you can damage the grass.
The secret to using this stuff like a pro
is you just wanna do a quick spray one time over the weed
and that will give you the best result possible.
You can use this on dandelion, crabgrass,
Dallas grass, clover and 50 more.
Now make sure you always read the label for Tenacity.
This video isn't a replacement.
I'm just showing you what I do on my own particular lawn
but some questions I get asked a lot are
can you water your lawn normally after applying Tenacity
and the answer is absolutely yes.
You just wanna let Tenacity dry.
It can just be a couple of hours
but personally, I generally spray around 6 p.m. at night
and then I'm gonna leave it drying overnight
and I'll water my lawn normally starting the next day.
The other question is about mowing.
Just like the dry product,
you do not wanna mow your lawn
for two days before applying Tenacity
and you need to allow Tenacity to sit on the leaves
for two days after you apply it before you mow again.
Now keep in mind, in some ways,
Tenacity is a miracle type of product.
It kills off the weeds without damaging your grass
but it does take some time to work.
Once you spray it on the lawn,
you're not gonna see anything for several days,
maybe even up to a week but then you're gonna see this.
The weeds are gonna start to kinda turn yellow,
then they will go to a paper white and they are so bright.
You're not gonna be too happy with me
because you're gonna think I kinda ruined your lawn
but leave it be.
In a few more days to another week,
they're gonna turn from white to yellow to brown
and then they will completely decompose on their own.
You don't have to dig anything up,
you don't have to rake anything.
You watch this, you might be thinking,
this sounds like a lot of work, it really isn't.
I went out and I put down a granular product on my lawn once
and I got rid of more than half of my weeds
and then I just needed to do one treatment of Tenacity
and that's gonna knock out about 90%
of the remaining ones in my lawn.
And remember, you're not gonna be going through this
every single year.
In my experience, after your first year,
the amount of weeds you'll see in the next season
will be less than half of this
and in subsequent seasons, you will see even less
till you reach a point where the weeds
are hardly a problem at all
because the second part to this is,
we now need to focus on the grass.
Now this video is primarily around the weed control
because that is the most important step you'll have
but now being the fall,
we need to move on to the overseeding process
and overseeding is one of the best things you can do
for any lawn to help increase the thickness, add turf
and you get a chance to introduce some new grass seeds
that can really be beneficial to your entire space.
Becoming a weed control master
is gonna be the most important part
of any kind of lawn renovation.
Doesn't matter what you put in your lawn
for fertilizer, supplements,
without controlling the weeds,
you will never have a great lawn.
So focus on this as your first step
and as you can see by these results,
your lawn will improve and you'll be on your way
to a much better place in no time.

