🛠️ How to open Acer Predator Helios Neo 16 (PHN16-I31) - disassembly and upgrade options

LaptopMedia
183 followers
Jul 20, 2026
🔬 In-depth Review: https://laptopmedia.com/review/acer-predator-helios-neo-16-phn16-i31-review-stable-rtx-5060-gaming/
📈 💵 Specs and Prices: https://laptopmedia.com/series/acer-predator-helios-neo-16-phn16-i31/
TESTED CONFIGURATION:
– Intel Core i7-14650HX
– NVIDIA GeForce RTX 5060
– 16GB RAM
– 1TB SSD NVMe
– 16.0″, 2560 × 1600 (WQXGA), 180 Hz IPS
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a step-by-step disassembly and internal hardware overview of the Acer Predator Helios Neo 16, detailing how to access components for upgrades and maintenance.
Hey everyone, today we are opening the Acer Predator Helios Neo 16.
Find the full review, benchmarks, display tests and more on LaptopMedia.com, the link is below.
Let's begin.
To reach the components, remove 9 screws and lift off the bottom panel.
We are using a Torx T6 screwdriver.
This laptop has a Core i7-14650HX and RTX 5060 graphics.
The series also offers Core i5 or i9 processors plus RTX 5050 or 5070 graphics.
All 9 screws are the same length.
Use a thin plastic tool to release the clips around the bottom panel.
Keep the tool near the edge.
Sliding it too far inside could damage internal parts.
Be especially careful near the radiator.
A deep slip here could bend the cooling fins.
The bottom panel is now removed.
The cooling system has two fans and shared heat pipes.
Always disconnect the battery before working inside.
This is the main SSD.
The second SSD slot is here.
Two memory slots sit under this shield.
Here, next to the memory, under the cooling system, is the processor.
The RTX 5060 is under the left side of the cooling system.
Killer 1675i brings Wi-Fi 6E and Bluetooth 5.4.
Now we will disconnect the battery.
The connector is tucked beside the battery, so we remove the battery first.
Remove the screws securing the battery.
You can check the result of our battery life test on LaptopMedia.com
and don't forget to visit our top 100 laptops with the best battery life ranking page.
This is a 92Wh 4-cell lithium polymer battery.
Now we can remove the main SSD.
The black wrap contains fine metal fibers and acts as EMI and RFI shielding.
This 1TB drive is an NVMe SSD on PCI Express Gen 4.
Both visible M.2 positions are sized for 2280 drives.
We return the SSD to its slot.
Here are two DDR5SO DIMM slots.
Official support is 32GB with speed depending on the processor, chipset, and memory.
We remove the installed module.
It has 16GB of SK Hynix DDR5 at 5600MT per second.
Like the SSD, it is shielded.
We press the module back into the slot until both retaining clips lock.
Here is the touchpad underneath.
That was the internal layout and upgrade access of the Predator Helios Neo 16.
Read the full review for display tests, thermals, and battery life.
Thanks for watching and subscribe for more laptop reviews and disassembly videos.
