This video recommends 13 essential tools available on Amazon to build a comprehensive garage setup. The selection covers a wide range of needs, from heavy-duty automotive work and precision woodworking to general maintenance and lighting, ensuring users have the right equipment for almost any home project.
Your garage is only as good as the tools inside it.
Most people settle for a basic drill and a hammer, and then a project comes along that
needs a jigsaw, or an angle grinder, or a torque wrench, and they're stuck.
This video fixes that.
13 Tools
All on Amazon.
Everything you need to build a garage setup that can handle almost any job you throw at it.
Let's go.
Tool number one.
The Milwaukee M18 Fuel High Torque Impact Wrench.
$244 point, and this is the most powerful tool on this list.
Up to 1,200 ft-lbs of fastening torque.
1,600 ft-lbs of nut-busting torque.
That's the kind of power that snaps rusted bolts loose that no hand tool can touch.
The PowerState Brushless Motor delivers it all in a body that's just 7.6 inches long.
That's up to 2 inches shorter than the competition, which means access
in tight engine bays and confined spaces where a bigger wrench can't fit.
4-Mode Drive Control.
One button switches between precision hand tight mode all the way to full removal speed.
Auto shutoff stops it at exactly 50 ft-lbs, so you never over-tighten a fastener again.
Tri-lead lighting surrounds the anvil.
No shadows.
Full visibility on the fastener.
Friction ring design tool-free socket changes in seconds.
If you do any automotive work, mechanical work, or deal with stubborn fasteners,
this wrench pays for itself the first time you use it.
4.8 stars.
1,157 reviews.
Milwaukee, $244 point link in the description.
Tool number two.
The DeWalt 20V MaxXR Brushless Orbital Sander.
$99.
Tool only.
13,716 reviews at 4.8.
Stars one of the most trusted cordless sanders on the market.
5-inch pad.
Brushless motor.
Variable speed dial from 8,000 to 12,000 rpm.
Slow it down for fine finish work.
Open it up for aggressive stock removal.
Low profile design keeps you close to the surface for more control and more precision.
8-hole hook and loop pad.
Sandpaper changes in seconds.
No tools.
One-handed locking dust bag keeps your workspace clean.
Or connect it directly to a DeWalt dust collector if you want zero mess.
Runs on any 20V Max battery in your collection.
If you already own DeWalt tools, this is a no-brainer addition.
$99.
DeWalt.
Link below.
Tool number three.
The Ryobi 1 Plus 18V Circular Saw.
$45.99.
This is the most underpriced tool on this list.
4,700 rpm.
5-5-5-inch carbide-tipped blade included.
Cuts through too by material clean and fast.
Left side blade placement gives you a clear sight line directly over your cut line.
No guessing.
Transparent lower guard keeps that visibility open all the way through.
Bevel adjusts up to 50 degrees for angled cuts.
Onboard compartment holds the blade wrench,
so you're never hunting for it when you need to swap.
Grip zone overmold handles.
Comfortable.
Secure even in wet conditions.
Works with any Ryobi 18V 1 Plus battery.
Already a Ryobi user?
You already have the battery.
This saw is basically free.
4.6 stars.
3,519 reviews.
$45.99.
Link in the description.
Tool number four.
The Wen 7 Amp Angle Grinder.
$25.56.
An absolute steal for what this tool does.
7 amp motor.
11,000 rpm.
Cuts metal.
Grinds welds.
Removes rust.
Sharpens blades.
Polishes surfaces.
At 4.6 pounds, it's light enough to work with all day without arm fatigue setting in.
Lock on side switch.
Press it once.
The grinder keeps running without you holding the trigger.
That matters on longer jobs.
Reversible handle mounts, left or right.
Works for both left-handed and right-handed users.
Comes with an arbor adapter for both 5'8 and 7'8 inch wheels,
so it accepts a wide range of grinding and cutting discs.
Adjustable blade guard included.
Two-year Wen warranty.
If you don't own an angle grinder, yet this is the one to start with.
$25.56.
Wen.
Link below.
Tool number five.
The DeWalt 20V Max XR Brushless Jigsaw.
$127.21.
And this is the most versatile cutting tool on this list.
A circular saw cuts straight lines.
A jigsaw cuts curves.
Circles.
Notches.
Custom shapes.
Wood.
Metal.
PVC.
Drywall.
It handles all of it.
3,200 strokes per minute.
Brushless motor.
More runtime.
Longer motor life.
Better efficiency.
Four-position orbital action.
Switch between straight up and down for precision metal cuts,
or more aggressive elliptical motion for fast wood cuts.
Variable speed trigger and dial.
Precise control over every material you cut through.
All-metal lever action keyless blade clamp.
T-shank blade loaded in seconds.
No tools required.
Bevel adjusts keyless detents at 0, 15, 30,
and a positive stop at 45 degrees for repeatable angled cuts.
Built-in lead light.
Integrated dust blower.
Cut line stays visible the entire time.
Removable shoe cover protects your work surface from scratches.
4.8 stars.
9,494 reviews.
DeWalt 127.21 cents.
Link in the description.
Tool number six.
The Makita DBO 180Z 18V random orbit sander.
$115.
Body only.
And this is the choice for Makita ecosystem users,
or anyone who wants a serious sanding tool without going corded.
Three-stage electronic speed control.
Low at 7,000.
Medium at 9,500.
High at 11,000 rpm.
One-touch button switches between them.
Match the speed to the material every time.
5-inch pad.
2008 EME orbit diameter for a fast, swirl-free finish that looks professional.
Pad break stops the disc immediately when you release the trigger.
No runout.
No accidental scratches.
Compact, low-profile design with a lower center of gravity.
Easy to maneuver.
Easy to control in vertical sanding in tight overhead spaces.
Connects to a dust extractor for clean operation.
Ergonomic soft rubber grip absorbs vibration.
Work longer without your hand wearing out.
4.7 stars.
9,089 reviews.
Makita.
$115.
Link below.
Tool number seven.
The Amazon Basics 26-piece hex key allen wrench set.
$12.32.
$12.
This is the cheapest tool on this list and one of the most useful.
26 keys.
Both say and metric cover.
Every hex fastener you'll find in furniture, bicycles, machinery, appliances, and automotive
parts.
Chrome vanadium steel.
Black oxide finish for corrosion resistance.
Long arm design gives you extended reach and increased leverage in tight spaces.
Ball end tip allows entry at up to 25 degrees off axis, meaning you can drive hex fasteners
even when you can't line up perfectly straight.
Two hinged storage cases with dedicated size labeled slots.
Every key has a home.
Nothing loose in a drawer.
4.7 stars.
14,734 reviews.
$12.32.
Link in the description.
Tool number eight.
The Erwin VisGrip two-piece locking pliers set.
$33.
For both, VisGrips are the tool that grips what nothing else can.
Stripped bolt, VisGrip.
Broken stud, VisGrip.
Anything rounded, rusted, stuck, or damaged VisGrip.
This set gives you two tools.
The 7WR, a seven-inch curved jaw with wire cutter.
Handles wide gripping tasks and cuts wire in one tool.
The 6LN, a six-inch long nose for tight spaces and small parts.
High-grade heat-treated alloy steel.
Maximum toughness.
These meet and exceed ANSI specifications.
Backed by Erwin's lifetime guarantee.
You buy them once.
4.8 stars.
2,706 reviews.
$33 for both.
Link below.
Tool number nine.
The Swanson S0101 seven-inch speed square.
$10.
One of the most useful tools in any workshop.
Five tools in one.
Tri-square.
Miter square.
Saw guide.
Linescriber.
Protractor.
You use it to mark square cuts before every single saw cut.
You use it as a saw guide to keep your circular saw dead straight.
You use it to check 90 and 45 degree angles instantly.
Heavy gauge aerospace aluminum alloy.
Die cast.
Doesn't bend.
Doesn't flex.
Stays accurate for decades.
Black gradations on a non-glare matte finish.
Easy to read in any lighting condition.
Quarter-inch scribing notches.
And the trademarked diamond cutout for rafter seat cuts and marking standard stud widths.
Comes with the Swanson Blue Book.
A 62-page reference guide for roof and stair construction.
Made in the USA since 1925.
4.8 stars.
17,208 reviews.
$10.
Link in the description.
Tool number 10.
The DeWalt 3-Piece Pro Wood Chisel Set.
$20.
And this is the tool that separates a real workshop from a basic toolbox.
Three chisels.
Three sizes.
Hardened steel blades engineered to hold an edge longer than standard budget chisels.
The tri-material handle is the standout feature.
Strike it with a hammer.
Hit it with a mallet.
The handle takes the abuse.
Mortises.
Dovetails.
Notching.
Pairing.
Cleaning joints.
Any woodworking project that needs clean, precise material removal this set handles it.
Comes ready to use out of the box.
4.8 stars.
1,022 reviews.
$20.
DeWalt.
Link below.
Tool number 11.
The WEN 2305 Rotary Tool Kit with Flex Shaft.
$21.50.
And this is the most versatile small tool on this list.
Variable speed from 8,000 to 30,000 RPM.
One dial.
Infinite adjustment.
What does it do?
Everything.
Carve.
Cut.
Grind.
Deburr.
Engrave.
Shape.
Drill.
Polish.
Glass.
Plastic.
Wood.
Steel.
It works on all of it.
80 accessories included.
Cutting discs.
Grinding stones.
Sanding drums.
Polishing wheels.
You have the right bit for every job from day one.
The Flex Shaft is what sets this kit apart from basic rotary tools.
3.5 feet of flexible extension that lets you work in places the main tool body can't fit.
Intricate carving.
Tight corners.
Precision engraving.
Lightweight body keeps hand fatigue minimal even on long detailed work sessions.
Two-year win warranty.
4.4 stars.
17,385 reviews.
21.50 cents.
Win.
Link in the description.
Tool number 12.
The Lexivon LX-183 Torque Wrench.
$45.
And this is the tool that protects everything else you own.
Here's the problem with tightening bolts by feel.
Too loose they back out.
Components fail.
Too tight you strip threads.
You crack housings.
You crack brake caliper bolts.
You crack lug nuts.
A torque wrench eliminates the guesswork entirely.
The LX-183 covers 10 to 150 foot pounds.
That range handles lug nuts, suspension bolts, engine components, brake hardware,
and general mechanical work.
Ships pre-calibrated to plus or minus 4% accuracy.
Every unit comes with a personal calibration certificate signed by the testing mechanic.
With a trackable serial number.
Audible click when you hit your preset torque.
Tactile feedback in your hand at the same moment.
You know exactly when to stop.
Chrome vanadium ratchet head.
Electro black anti-corrosion finish.
Full steel body.
Zero plastic in the mechanism.
Yellow scale markings on a black background.
Easy to read in low light conditions.
35,443 reviews at 4.6 stars.
That's one of the most reviewed torque wrenches on all of Amazon.
Forty-five dollars.
Lexivon.
Link below.
Tool number 13.
The DeWalt DCL-043 20V Max Lead Work Light.
Sixty-eight dollars.
And this is the tool nobody thinks about until they're working under a car at 9 p.m.
Four LEDs.
1500 lumens on high.
500 lumens on low.
Beam visible up to 508 yards, 1525 feet.
The 90-degree pivoting head is the key feature.
Point it at a wall.
Lay it on a surface.
Hang it from the integral hook.
Stand it on its base and aim it at your work.
Hands-free in every position.
High mode when you need maximum brightness.
Low mode when you want extended runtime.
Runs on any 20V max battery.
If you already own a DeWalt drill or jigsaw from this list,
you already have the battery to run this light.
4.8 stars.
20,949 reviews.
This is the second most reviewed tool on this entire list.
Sixty-eight dollars.
DeWalt.
Link in the description.
Links to every single tool are in the description below.
Every link goes directly to Amazon.
New tool videos every single day on ToolDrop.
Subscribe.
Hit the bell.
You won't miss a drop.