Must Try Mod Podge Hacks for Christmas in July (YOU won't Believe these ideas)

Christmas Decorating Ideas
9 followers
2 Video Views·Jul 7, 2026
From budget-friendly home decor to creative Christmas projects, these easy tutorials are perfect for crafters of every skill level. If you love thrift flips, Dollar Tree DIYs, decoupage, upcycling, and cozy holiday decorating, you're in the right place!
AI Generated·May contain errors
Video Summary
AI GeneratedBrandy demonstrates a variety of budget-friendly holiday DIY projects using materials from Dollar Tree. By utilizing Mod Podge as a primary adhesive and sealant, she transforms simple items like pine cones, glass jars, and metal carts into high-end Christmas decorations through techniques such as decoupage, mica powder painting, and glitter application.
Dollar Tree is the best place to go shopping for glass,
especially when you want to create DIYs for any occasion.
I picked these up for, obviously, $1.25 each,
and we're going to just glue them together.
Now, you can use whatever kind of glue you want.
I happen to have this one hand, and it's one of my go-tos.
And I just did the entire rim of this little candlestick
and then attached the little glass piece right to the top.
I let these dry for about three hours
before I came back in to do our little Mod Podge hack DIY
to this.
And honestly, I love how these look just like this.
But hi, my name is Brandy, and I can't leave things alone.
So we're going to need to get out some mica powder,
some Mod Podge, and go to town on these joints.
Did you know that if you mix mica powder and Mod Podge,
it creates its own paint-like substance?
I call it mica powder paint.
Using this white, and there really isn't a ratio.
So if you go askin' Brandy how much,
no, what do I got, about two tablespoons of Mod Podge
here in each little plop,
and definitely about a tablespoon of mica powder
in that joint, for sure.
And I feel like I put about the same ratio
right in our other little plop of Mod Podge here.
Mix these up until you're happy with it.
And then I personally, when I'm doing glass,
like to use little sponges.
It doesn't matter if you're using like a makeup sponge,
a little like, what are they called, the Dotton sponge.
I'm drawin' a blank here, people.
Or a little kitchen sponges, even.
I'll cut them up and use them as well.
Just a sponge.
And tapity-tap-tap-tap on the glass.
For some odd reason, that works better to me,
and it's kind of a thicker substance.
So it gives it a little bit of a texture
as you're doin' it.
I personally feel like this color
would look amazing on the whole thing.
Now, people be mindful,
this is gonna take several layers.
This is not a quick and easy craft.
This is after three layers.
And it's really pretty with three layers,
but I did five.
You can take the heat gun over it gingerly
and try to speed up the heating,
but it is going to take a little bit of time
because each layer you want to dry a little bit.
It's not really long of a dry time,
but just make sure, you know,
Mod Podge usually dries pretty quick,
but just make sure your layers are dry
before you start putting on another layer.
I was goin' for an ombre effect here,
which I have done before on this channel many times.
I'm just taking the green and putting it all at the top
and bringing it down to blend into the white.
And then in the center where they meet,
I just kinda go back and forth over them,
switching sponges,
till there isn't a defining line
where you can see that it's green and up
or white and down.
They really just kind of mesh right into one another.
These took about an hour to completely dry
once I was finished my last layer.
People, these are absolutely stunning.
I could not have hoped for a better end result
with the way that these pieces turned out.
Let me know in the comments below
if you're gonna try some mica powder paint
on some glass this holiday season.
When you're in Dollar Tree,
head on over to the Craft Your Square section
and grab you some of these styrofoam Christmas tree pieces.
Let's be real here.
They are meant for Christmas trees, period.
I mean, I've tried to use them for other things,
but let's just be realistic.
They are in the shape of a tree.
You know what I'm saying?
We're gonna apply some gesso onto the top of these.
I love to use gesso as a base on styrofoam
whenever I'm going to decoupage something.
Styrofoam has like those little bitty gaps.
You know what I'm saying?
And gesso is pretty thick.
And when you apply this, it will fill in those gaps,
giving you a very smooth finish.
And there's other ways you can go about this.
And if you don't like this idea,
just use regular paint and decoupage completely up to you.
This is just how I roll on with decoupaging styrofoam.
I would recommend if you're gonna use acrylic gesso,
do two or three coats.
But for the sake of time, I just applied one on here
and I think the end result was really good.
For the decoupage portion,
I'm gonna grab one of my TDS Creative
A4 rice paper designs.
I'll often get asked like, what size is A4?
It's realistically just a smidge bigger
than a regular sheet of paper.
That's really it, just a smidge.
Not much, just a smidge.
We're going to wrap this around our cone.
And I got two pieces of paper
because really one just does the job for each cone.
And I cut them down to size.
Now they're not gonna line up in the back
and I was completely okay with that.
If that's a problem for you,
then you might wanna do like section by section.
But you'll see in the end result,
it's barely noticeable
that they are not completely lined up.
For our medium, I'm gonna use some good old Mod Podge.
And to apply our piece,
I'm gonna use one of my TDS Creative Artist Brushes.
This is in the fan style.
I'm applying a nice healthy layer
to a large section of the cone.
That gesso is a really nice barrier
so the Mod Podge is sitting right on top of that.
And it's going to allow us
to attach that rice paper really easily.
You can apply the rice paper at this point.
If you wanna leave it dry, you can right ahead.
I'm taking my water bottle
and giving the back of the rice paper
a little spritzy spritz.
This, for me, just helps make it
a little bit more manipulatable.
You do not have to do that.
I'm using a dry kitchen sponge.
I get these at Walmart in a pack
and I just cut them up.
And whenever I'm doing something
that is circular or cylinder shape,
whatever you wanna call it,
this helps me to press it down and go around
instead of like using a brayer,
that can be difficult.
And sometimes cling wrap, it can tear
and it can get sticky.
So I just, the sponge is a method
I've been using for a long time.
You can utilize whatever tools you would like
and use whatever method you would like
to apply your rice paper.
When I was happy with the piece,
everything was all dry,
I cut the rice paper down to size
to fit the cone.
I didn't wanna leave our trees plain,
so I grabbed some of my little ornaments
that I also have available on my website.
These are really, really rustic
and they're unfinished little wood ornaments.
So I wanted to apply a layer of Mod Podge
over the top of them
and put one of my TDS dry rub on transfers
onto them for a little decorative accent.
Whenever I wanna put a transfer
on a really rough piece of wood
and I don't feel like sanding it,
putting a sealer over it first really helps.
For the base of the trees,
I'm gonna use these larger wood slices
and I grabbed a circular dowel
that we're gonna need to bring on in the miter shears
and cut down for our tree trunk.
Yeah, tree trunk, tree base, right?
Cut it down and I didn't need to cut a whole lot
because we're just gonna shove it
right on up the bottom of that tree with some glue
and then glue it right on down.
We don't actually have to put the rod
all the way up to get it to work.
To cover up the base,
I just grabbed some messy moss.
You can absolutely put whatever you would like down here.
This is just how I chose to go about this.
I then grabbed my traditional Christmas transfer set
and picked out two little ornament pieces
and rubbed them on our wood slice ornaments
once the Mod Podge was completely dry.
I grabbed some twine and then attached them onto our piece
and really, really love how these turned out.
If you're looking for Christmas craft ornaments,
Dollar Tree is definitely the place to pick them up.
You get two for $1.25
and I actually have two different hacks for these.
We're gonna do two sets of two.
So grab you some hard coat Mod Podge.
We're going to also need to grab some string.
Well, that's what I'm using is some string.
You can put just a little bit of the hard coat in here,
about a tablespoon.
You don't need a lot
because we're not using a whole lot of string
and a tiny bit of water.
And oh, don't forget the gloves, okay?
Don't forget the gloves.
It gets messy.
I have this really thin cord
with little gold pieces swirled around it
and thought this would be perfect to wrap these ornaments in.
To get started, I'm taking the little hanger pieces out
because we don't need them right now.
I mean, you can leave them in if you want,
but it's been my experience
whenever I'm trying to work with these ornaments,
if I leave them in,
especially if I'm working with a medium like Mod Podge,
I will get it smeared all over bits
I don't need it smeared.
So we're just gonna be using this for right now.
A tip for working with plastic and Mod Podge.
Mod Podge usually dries translucent.
It does work on plastic.
However, it leaves the film almost 98% of the time.
Does not dry translucent like it does on glass.
So it's a good rule of thumb
that you're very purposeful
with your finger placement on the plastic.
And if you cannot help it,
it is easy to remove off the plastic.
So this way you don't have that residue
all over the pieces that you want to be translucent.
For this particular bulb,
I wanted to put some little gold glittery stars
inside of it.
So I kept our string right in the center
and overlapped in one section
to just create a little decorative design.
For the second ornament,
I could not help but put my fingers all over the place
because I wanted the rope or the twine or our string,
whichever you want to call it, to go different ways.
However, I did make sure to wrap it twice with each section.
This way it kind of made it a little bit more dominant.
If I wrapped it just once, it was still pretty thin
and I couldn't actually see the design
of the twine rope stuff on here.
And I wasn't placing anything in this one.
So I knew I was going to have to go back over it
and just get off some of that Mod Podge.
And don't worry about where you put your end bits.
The Mod Podge is going to keep the end in place,
especially once it dries.
Now, a little tip as well.
If you have never taken one of these hanger pieces
out of these ornaments, people prepare yourself
because it is not easy.
I had to call in other tools to come help me.
Really?
Sorry, sorry.
Got a little dark there for a minute.
I struggled with this for like 10 minutes.
I do not know why it's so difficult to get back in there.
If someone has an easier way to shove that hanger
back in that ball, please help your girl out.
Pop it in the comments.
These little glitter pieces I grabbed from Dollar Tree,
I thought were really cool
because they have like their own natural static
and they just cling to the inside of the plastic
in this ornament.
And in case you don't have a little baby funnel,
you can just take a little piece of paper
and swirl it up and shove it in the hole there
and then shake, shake, shake, shake, shake
as much as you want into the ornament.
And real quick before I share the reveal with you,
I want to show you how once this is dry,
that Mod Podge residue is on the plastic.
And you can see here I am just taking my fingernail
and scratching it right off
and it is allowing it to be translucent
instead of having that film on it.
So in the event that you want to use Mod Podge
on anything that's plastic,
it is this simple to clean it right up.
We are not reinventing the wheel
on this one right here, people.
You've probably seen it done a hundred times.
However, I'm gonna do it to keep my promise
of keeping it easy craft
in every single one of my Christmas videos
the rest of the season.
For this one, just grab any kind of Mod Podge you want
and some glitter,
and then swirl the Mod Podge around the ornament
as much or as little as you want
and sprinkle your glitter and shake as you continue.
This will get any excess glitter off
and you have done created your own DIY glitter ornaments.
You can do the entire bulb
or you can just do half like I did on mine.
Let's make a door hanger with this giant pine cone.
This sucker is probably a good 10 inches long.
It is really, really big
as you can see me holding it here in my hands.
And you can take this idea
and remix it into whatever works for you.
I'm just going to use glitter and the Mod Podge.
You could add paint, you could add glitter and paint.
You could do this with mica powder as well
and create a mica powder paint.
I'm just taking some glitter and some Mod Podge
and putting all around the edges of the pine cone
and making sure that I am doing it upside down
because we're going to hang the pine cone upside down.
And in case you're wondering,
because I have been getting questions
anytime somebody sees these,
these were sent to me from a subscriber.
She was kind enough to clean these off.
She had an abundant amount and she sent them to me.
I did not purchase these anywhere.
For those who keep asking, where did I get them?
I've been trying to let everyone know
that I had a kind person send them to me.
And I've been trying to give you
as many ideas as I can with these.
Let me know in the comments below
if you'd be interested in just a pine cone dedicated video
because I have a ton of supplies left
and I'd be happy to do that
to just make an extra little DIY video
with a few projects using some pine cones.
People, I'm going to be real with you here.
I was not sure how I wanted to hang this sucker up.
So I took this ribbon from Dollar Tree
and I smooshed it in between the thick part
of our pine cone here.
And then I made a loop
and I took and made some dovetail ends.
I then took some of this greenery from Dollar Tree
with the little cranberries and shoved it in the top
and put it on the front door.
Absolutely beautiful in the sun.
You can see all the glitter stuck on there so, so well.
I don't really mess with resin very much
but these little ornaments caught my eye
and I'm like, we can definitely create these
without the resin.
You're going to need to grab you some wooden ornaments.
These are from Dollar Tree.
They come in a little pack.
You get three of them joints.
We're going to be using these.
I'm not using the exact color paints that they had on here.
I decided to switch it up
and went with two different color variations
that I thought would just work for what I wanted to create.
And I'm doing a two blend and a three blend.
So on one ornament, I'm using two colors
in case those of you that are not familiar with blending
or you are new to it, you have one option here.
Or if you want to get wild and try a three blend,
we're doing a different one here.
So for this one, I'm using the yellow, a pink
and a blue, and we're going to blend these together.
It really helps if you keep both of the paints wet
and you keep cleaning your brush.
The more you clean the brush as you go back and forth,
the less it allows for one color
to become more dominant on that paintbrush.
I did use a completely different brush for the blue paint.
And then I came back in with the pink brush right here,
you see, and as it starts getting heavy on the brush,
I just wipe it off.
So this way it blends more as you go back.
Again, the paint is completely wet as I'm doing this.
It did not dry at all.
I did notice the paint was drying over here
and I was like, oh, and hurried up and grabbed my other color.
This is like a teal.
And I went in with a different brush
and then brought the pink brush back in.
And you can see it was really dominant still.
So I kept trying to clean the brush off
and then had to add more pink paint to bring it down.
That will happen sometimes.
No need to stress.
Just make sure the paint stays wet
and then come back in with the other color
and blend down to the middle section where they meet.
I went with some black chalk paint around the edges
on a teeny tiny brush
since we had like a little bit of a black frame
on our Etsy pieces.
Once that was dry, I then took the same brush
and this is a really tiny angled brush,
which is really great for creating
those little slanted pieces on your tree.
And all I'm doing is moving our little angle brush
back and forth.
So this way we have those teeny tiny little poke outs
of the branches.
People create as many trees as you want on your ornament.
You know what I'm saying?
Just add in what you feel is gonna work for the design.
There's really no right or wrong way to creating these.
You can even add some faded ones far in the backgrounds.
So this way it looks like there's more than it is.
It gives a cute little illusion.
And once you have your little pokes,
just really tap, tap, tap, tap that center with your paint
and fill it all in.
We're gonna grab our resin, I mean, our Glossy Mod Podge.
Yep, that's all we're using here.
And a lot of it, my friends, a lot of it.
You see how much I got on this paintbrush
and I'm being really ginger with it.
You wanna make sure that you're not over smooshing it
because then you'll have extremely noticeable paint strokes
along with some bubbles.
Now a bubble here and there isn't too bad.
And honestly, anybody that's over visiting your house
up on your ornaments close enough
to notice a bubble or two, they're too close.
Just tell them to back up.
Let's take a real quick peek again at the Etsy piece
and now let's check out mine.
Look what I found at Dollar Tree.
This was my first time I have ever come across
these candy jars.
And believe it or not, I had a DIY for these
that doesn't involve candy.
I know, I know, don't be mad.
One thing I did think that was odd,
there's no rubber on the top.
So these little tops just come off super easy.
Now my hand did fit in the jar with no problem.
And these also have two ways for you to be able to sit them.
You can put them on your side
or you can sit them straight up.
And I figured I'm just gonna do mine sitting straight up
but either way you can create this sideways or not.
You can use whatever window clings you want
but this little fox delivering a letter
to Santa in a little mailbox is gonna be perfect for this.
I also thought it was cool
they had the bubbly pieces on the back
so you had two options in this window cling set.
But we're going to just take a little bit of Mod Podge
in case you don't know,
you can apply Mod Podge to window clings
and it gives a permanent stick.
This window cling is not gonna come off of this little jar
and this little fox is going to entice our children.
So put little pieces of paper in here with their name on.
If you got more than one,
you want them to put their name on it
because my kids used to lose their list to Santa all the time
before I got a chance to mail that sucker out.
I'd be like, where's your list?
They'd be like, I don't know.
So this way you can have them all season long,
you create the little jar,
you have them write what they want
and then when it's time to sit down,
you collect everybody's name out of this little jar
and have them write their list
and then off the letters go to Santa Claus.
Deco Podge is a great way to upcycle and transform teapots.
I had this one laying around
that I picked up recently from an estate sale.
It didn't have a lid
and I wasn't really crazy about the colors.
I'm like this one, this one right here.
Now to start off,
we're gonna apply a layer of multi-surface paint onto this.
The ceramic is shiny.
There are several different ways you can tackle this.
This is not the end all be all,
but I do like multi-surface for a base coat on ceramic.
Now here is where your catch 22 comes in, people, okay?
You're gonna need like a lot of coats of that
if you wanna cover over something with the design.
So to X-nay all that extra work,
I'm just taking some of my Waverly white chalk paint
and then going over the multi-surface.
Now you might be asking yourself,
Brandy, why not just use the chalk paint?
Because it's been in my experience
that if I use that as a base on something shiny,
it will peel up the multi-surface.
I don't have that problem so much.
For the decoupage portion,
I'm gonna be using one of my TDS Creative
decoupage tissue papers.
These are really large and they are super thin.
I decided to take a little bit of water on a paintbrush
and just trim out the sections that I wanted.
Went with large pieces for this.
You could absolutely do some patchwork
and do the smaller designs.
This is just how I chose to go about this.
Would like to do another teapot down the line,
do some patchwork with some smaller sections
and see what that looks like.
Now we're gonna get a little artsy fartsy
and I'm grabbing one of my clay molds.
This is just one that I picked up off Amazon.
It was probably a couple of bucks.
It might even be down in my description link.
And my favorite clay for anyone that is going to ask
is called paper clay, at least at the current moment.
That is not what this is.
This is actually some generic stuff I have off to the side.
I am out of paper clay.
I've just been using this right now.
Taking a little bit of my Titebond Quick and Thick
and applying on the back
and then pressing our clay pieces gingerly
to not mess up the design that we created with the clay.
And then I had a little snowflake mold
and I got this joint off Teema for anyone interested.
And I added some little snowflake pieces
to our teapot spout, the little front piece.
And I allowed these to dry for about 24 hours, roughly.
Probably not the full 24,
but you get where I'm going with this.
For our medium,
I'm gonna be using some good old Mod Podge.
For our application,
I'm gonna be using one of my TDS creative brushes
in the fan style.
And to help me apply our piece,
we're just gonna be using a dry kitchen sponge.
And I picked these up in a pack from Walmart.
I've been told recently you can get them from Dollar Tree.
Let me know in the comments below
if you've seen them at Dollar Tree.
To apply our piece,
I'm using a little bit of water to spritz
on the back of our tissue paper.
You don't have to.
If you want to apply your dry,
you can absolutely do that.
I feel like this helps me manipulate the paper a little bit.
Just be gentle.
The problem I run into
whenever I'm doing something cylinder shape,
circle like this,
is that your tissue paper,
especially if you're not doing patchwork
and you're doing larger designs,
it bunches on the side.
And then there's a ton of wrinkling.
And a lot of people hate that.
I don't mind a little bit of wrinkles.
But one way to combat that is in the sections,
you notice that there's a big ripple.
Take your scissors,
put it up where that ripple is,
snip it,
and then gingerly overlap the two pieces.
Then you can come back in with some Mod Podge,
see how I'm just kind of pulling the sections back up
or whatever sealer medium you want to use,
and then just apply it.
Once it's dry, it should look like that.
On the opposite side,
I used the nutcracker design
and applied our piece using the same technique.
And here, I did not speed it up.
I really wanted y'all to see,
especially if you're a beginner
or even if you're a seasoned decoupageur
and you struggle with certain things,
just the amount of time it takes
when you're doing this,
the attention to care, okay?
For the videos, I'll speed it up a lot of times
and you guys get to see like how quickly it's being done.
But realistically, I'm really taking my time.
It took me hours to work on this little teapot.
So don't let the video fool you with the short footage.
I'm gonna use some of Dixie Bell's Gold Gilding Wax
for our accent color.
Absolutely use whatever accent color you would like.
This is just how I chose to go about this.
Now, I started by just trimming off
the majority of the spout and the handle.
And before I finished it off,
I wanted to touch up and blend in the decoupage paper.
And I like to do that
by taking the same background paint color
and using, you can use whatever kind of brush you want.
In this case, I decided to use a stippling brush
and blend in the paint to our decoupage tissue paper.
And I will do that by just adding a little bit of that paint
onto the end of the brush
and just tappity, tap, tap, tap in
all around the edge of that decoupage tissue paper.
Now, one of the things that I really wanted to do
was to create a texture on this.
And there's multiple different ways
you can create a texture,
but a super simple way
because chalk paint already has its own thickness
is to tappity, tap, tap, tap it onto your piece.
That's gonna give you just a small amount of texture.
If you want a large amount of texture,
add baking soda, you can add some calcium carbonate,
and then go from there.
This, again, is just the technique that I wanted to use.
I did this all around the edge
and all around the rest of the teapot.
And then I noticed this.
I must not have been paying attention
when I sat this down while it was wet
and there were pieces of the decoupage tissue paper
torn right off.
So to combat that, I just took some of that paint
and started tappity, tap, tap, tapping around the design
and then dry brushing everything inward
to give it a purposeful look.
I was so not happy with this.
I was like, you know what?
We just won't show this side.
It turned out okay on that side,
but, you know, meh.
Santa it is.
And here's a little closeup of how that dries.
Remember how I said it's just a little bit of texture
with the chalk paint, tappity, tap, tap, tapping?
It's not huge.
Little pieces like this,
especially when you're decoupaging
and not everything's completely even,
that little bit of texture can really help blend things in.
I took the gilding wax and then went over the piece
and think that this teapot is really something special.
Grab yourself some poster board
for these yarn cone Christmas trees.
And then grab some of this hard coat Mod Podge.
This stuff means business
and it works amazing with fabrics.
Take your poster board and start spinning it
so your top end is really teeny
and then the bottom's got a little bit of a wide bottom.
And then you want to cut it as even as you possibly can.
If you like to measure and do all that stuff,
you can write ahead.
I like to wing projects most of the time.
Just kind of eyeball it.
Then I took my hot glue gun and just glued down the side.
And people, hold that in place for a second
because that sucker will spin right off if you don't.
I did the same exact thing and just cut a smaller shape.
So this way I had two different trees
and they were different sizes.
You can make as many of these as you want.
Really just depends on how big
the piece of poster board you have is.
And look at how great these Christmas cone trees turned out.
Aren't they amazing?
That's going to be it for this first project.
I'm just kidding.
All right, back to business.
You're going to need some yarn.
Okay, I have some white yarn here and some brown yarn here.
I figure let's keep it a little neutral.
And then grab you a bowl and your hard coat Mod Podge.
You could use regular Mod Podge.
I've done that as well.
I just feel like this stuff has some extra oomph in it.
Plop you a little bit of water.
It doesn't have to be a lot.
Just makes it a little bit runnier
so it seeps through your fabric.
You don't have to get wild and put like a cup
to tablespoon ratio or anything like that.
I probably put about a tablespoon of water
and then just mixed it
till everything was nice and smooshed together.
Finding the end of the yarn is always so much fun,
especially after you dunk it in the Mod Podge
because you're doing little dunky dunks.
Now, some people might just saturate it.
I've done that before,
but I learned the hard way
that sometimes you just have too much Mod Podge
and then it takes days and days and days and days to dry.
And who has that kind of time, people?
Because I don't.
So little dunky dunk, a little smooshy smoosh.
And then we find our end again
and I spared y'all watching me dig for the end.
As you can see, it's kind of spread out here on the bag.
And then I put the end not all the way at the bottom
because I want it to be able to wrap
and kind of cover that up
so I knew it was tucked in there really well.
And then just continued spinning the yarn
up and down the tree
until all of our poster board was completely covered.
I did the same thing with our white yarn.
I did a little dunky dunk in the Mod Podge,
a little smooshy smoosh.
Because I didn't oversaturate with the Mod Podge,
I was able to take my heat gun
and do a couple minutes of drying here and there.
And after about two hours,
they were completely ready to be displayed.
I added a little wood star at the top of the white one
and I love how these turned out.
Dollar Tree had these little metal carts
for fall this season and I picked one up.
Now people, I was not happy about the $7 price tag,
but I really wanted to utilize this for Christmas.
So I sucked up that $7, put it in the cart and here we are.
Okay, we're gonna use some of my Folk Art Multi-Surface
and give this a nice coat to get a base on here.
I really like using Multi-Surface for bases
whenever it comes to like porcelain, ceramic, metal, glass,
just works really well for me.
Now I'm going to go over this
with some Waverly Chalk Paint,
because a lot of times whenever you use the Multi-Surface,
while it's a good base,
because it sticks to those pieces well,
you usually gotta do like three, four, five coats of coverage
and that's too much work.
When I was all happy with our base coats,
I grabbed some Mod Podge, two Deco Podge,
our TDS Creative A4 rice paper onto here.
Now you can absolutely go about this however you would like.
I took two pieces of this design
and used my fingers to press around our wagon
or cart, whatever you wanna call this,
and then trim it down to size.
A lot of times I'll flip it over on the back
because I can see the creases better
and then I'll cut a little excess.
I took our Mod Podge and applied a layer on the side
after I had our pieces all cut down
and then just started patching the pieces together.
Now for something like this,
and those of you who have problems with designs lining up,
you know, there's that.
These did not line up, but you'll see in the end result,
you can hardly tell.
And if you want, you can always dry brush
some color over it.
I think that this turned out really amazing
even though the designs weren't exactly aligned.
But since the paper and the pattern
were kinda all the same, you know what I mean?
It just, it worked out for me.
Once I had the sides done,
I then came in on the front and folded a piece
to where the sides ended and folded it back.
So this way I could cut it down into size
and then put this right one to the front of the cart.
I was going to take a little bit of Antique Waverly Wax
and do like, you know, a little bit of weathering
all over the piece, rustic it up a bit.
And I decided against that.
I was like, you know what,
we're just gonna take some black paint
and trim this joint up.
I went around the bottom and the top
and really love how it helped those details
in the rice paper pop out.
There are so many ways you can actually use this wagon
as well as decorate the piece.
I decided to kinda create a little scene right on the top
and add some vintage pieces with some messy moss.
Why not?
You know, love the messy moss.
And of course I pop some lights right on here as well.
This is one of my favorite Mod Podge hacks
and we're gonna do it on some tags.
I had these awesome ceramic tags
that I picked up from Dollar Tree just sitting around
and I had these awesome stencils
that I picked up off Amazon in a bundle.
And I thought these trees would look fabulous on here.
Creating these pieces using Mod Podge
requires a little bit of patience and some painter's tape.
If you're not printing out your own sticky stencils
or, you know, you have sticky stencils
because you can actually buy sticky stencils.
You wanna make sure that you tape the suckers down
as good as possible because it is a real good possibility
that the Mod Podge is going to smoosh under the stencil,
especially if you put too much on there.
I wanted to also add some color
so I mixed some red in with the Mod Podge
and then I'm taking some silver glitter.
So we're gonna do two different things.
And here's where I messed up.
Since I plan on using the Mod Podge
that I'm layering on here first,
I should have did a really thin layer.
And here's me.
This is a new paintbrush, people.
So I'm over here pulling out the thing.
I always should wash them, but I never do.
I should always wash them before I use them
and I just don't.
And that is a muck up on my part.
Anyhow, I'm taking the paint with the Mod Podge
and the glitter and I'm just alternating this
over the stencil.
I let this dry for a little bit
and then continue on with the next one.
And you're gonna see when I pull it up
that there is definitely some bleed through.
I did not offload the paintbrushes well enough.
One thing I could have done to avoid this
is just to put a layer of Mod Podge on here first,
allow that to dry, and then go back over with the Mod Podge
and the Mod Podge with the paint.
That would have stopped the bleed through.
But for some reason,
I wasn't rubbing two brain cells together
and I thought to myself, it'll be fine, it'll be fine.
And it still turned out really pretty,
but there is some bleed through.
I just wanna let y'all know.
So basically you can mix Mod Podge with some paints
and add some glitter over top of that
to get a really cool effect.
