Ford’s Secret to High-Quality 1960s/70s Automobiles: The Budd Company

RC- Car
12 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis video explores the history and impact of the Budd Company, a pioneering automotive supplier founded in 1913. Known for its expertise in high-quality body manufacturing and the development of unitized body structures, Budd significantly influenced the construction and fit-and-finish of various domestic and international vehicles before its eventual decline.
Well, what does the building shown in the picture have to do with the domestic automobile industry?
Well, as you can see the sign over top of this factory in Philadelphia, it says Edward G. Budd
Manufacturing Company Automobile Bodies. This is the Budd Company if you've never heard of them,
but the Budd Company was a dominating force in automotive manufacturing for a number of years
after its founding in 1913. More specifically, the Budd Company was really the company that
developed a lot of ways to manufacture bodies with high quality. In fact, we're going to talk
a little bit more about some of the advances that they made on later vehicles, but for a long time
they actually ended up building bodies starting off for Chrysler and the Dodge Brothers. And here's
a more modern picture of the former Budd Company facility. The Budd Company went belly up in 2014,
but a lot of its operations had become part of Thyssen and ThyssenKrupp, and eventually I think
some parts of it were sold to Martin Rhea. But regardless, it's no longer around. But in particular
by the 1960s, I would say, the Budd Company was a pretty dominant force in automotive manufacturing,
capitalizing on a reputation that started all the way back in those teens of the 20th century.
And while the Budd Company was an automobile producer for many years before the 1930s,
I think it became especially popular after it really did the design work for the body on the
Citroën Traction Avant, which was a front wheel drive vehicle that came out. This car, take a
guess what year this car is from. It's pretty hard to believe, but actually this car that you see
here was introduced in 1934 by Citroën, and it had a unitized body structure. That's right,
this is not a body-on-frame construction. This was the first mass-produced car to have a
unitized body in the world, and it was engineered by the Budd Company and licensed by Citroën
back during that time frame. By the way, this particular car was produced all the way into
the 1950s, so it just shows you how popular it was and how timeless its styling was as well.
Now, in the U.S., the Budd Company also helped another company pioneer unitized construction,
and that was Nash. With the 1941 Nash 600, the car was so named because it could allegedly travel
600 miles on one tank of gas, in part because it was the first American car to have a unitized
body structure, and it enabled considerable weight savings for the time. Now, Nash,
from a marketing standpoint, said the car was not only lighter, leading to fuel efficiency gains,
but it also endowed the car with fewer creaks and rattles and also made it quieter because
it didn't have those creaks and rattles. Some of that might have been true, but for those who have
ridden in the early unibody cars, eh, I don't know that I would necessarily take one over a
body-on-frame car. In particular, I don't find the road isolation to generally be as great as
body-on-frame cars, but oh well. In any case, this particular Nash 600, as I said, that came
out in 1941, was really the first American car that Budd became known as an innovator for because
of what I previously mentioned. Now, as time went on and you get into the 1950s and 1960s,
the Budd Company certainly expanded its reach. As I mentioned, it started out with a relationship
with the Dodge Brothers, but then branched out even overseas to Sichuan and then Nash,
as well as other companies. And by the 1950s and 1960s, the Budd Company was producing
automobile bodies for a significant number of car companies. It still had the relationship with
Chrysler, and as you can see in this advertisement here, they mentioned that they are producing
automobile bodies for them and have for some time. And if you look in this advertisement for the Budd
Company, you see a number of vehicles, and they say, wherever you look, you see Budd.
And there's a Cadillac, the individual who's driving is sitting in a Lincoln, you can see
a Ford, and some various vehicles on the roadway. So I'm not quite sure which of these were Budd
Company vehicles. Aside from the Lincolns, they definitely made sheet metal for Lincoln,
and then Chrysler products as well, as I mentioned, and some Ford products.
We're going to talk a little bit more about the Ford products in particular right now. And that's
because the Budd Company supplied Lincoln with sheet metal for a good period of time, including
on my Mark III that you see here, where the exterior body panels were fabricated by the
Budd Company. And this was something that continued on Lincolns for a period of time,
the Mark III, the Mark IV. I know that those used sheet metal stampings from the Budd Company in
particular. And one of the reasons for this was not only capacity at the Ford Motor Company,
but also because Ford wanted very high quality stampings with tight tolerances so that the gaps
were all uniform across the vehicles. This was something that you just didn't see on the other
Fords, although the Thunderbird that you see here is pretty good. In any case, it was interesting
that Lincoln turned to Budd for the Mark cars, like my Mark III, where they knew that the quality
of the stampings was going to be high. And I have to say, you see all the gaps on the car
and the Lincoln. They're pretty perfect for the time frame. Maybe there are some better
gaps on cars now, but back then it was hard to find a car with uniform gaps all over the place
and gaps that weren't eight millimeters here and then two millimeters there. But the vehicles that
wore Budd Company stampings really were a cut above the rest in most cases, particularly the
Lincolns. And I have to say, if you're going to buy a high quality domestic car from the late 1960s,
early 1970s, you really can't do much better than the Mark III that you see here. This is my
1969 Mark III. All the Mark III's, the 69, 70, 71, are all just excellent, super high quality
automobiles and really good fit and finish all over and materials. Great cars overall.
Now the Mark IV that you see here also had stampings made by the Budd Company,
but unfortunately Ford kind of significantly degraded the material quality on the Mark IVs.
The exterior stampings were great and notice how beautiful the overall, let's say, gaps are on this
car that you can see. They're tight, they're uniform, but the inside of the Mark IV really
was kind of a letdown, as was, to me, the car itself. It just doesn't drive nearly as nicely
as the Mark III. It's very quiet on the inside, but it's just a very waterbed-y ride. The Mark III
is soft, but the Mark IV is, I would say, too soft, to be honest, and they all drive that way.
It's kind of like I said, you're sitting on a waterbed and a very cramped and claustrophobic
waterbed at that because there's not a lot of glass area in these cars. It's kind of like
sitting in a modern-day sports car and you don't even get a standard passenger side outside rear
view mirror. So they're pretty hard to see out of as well, at least if you're merging or trying to
get into a lane to the right of you or turning right and trying to look to see if there's anything
besides you. And while customers definitely benefited from the Budd Company sheet metal
stampings and the good quality there, the Budd Company was also proud of its affiliation with
Lincoln and the work that it did on these Continentals, as you can see in this particular
advertisement, where they highlight their work on the 69 Mark III that, by the way, has the same
color combination as mine. And you can tell it's a 69 because it's got the exposed wipers. The 70
and 71 have hidden wipers. And on this, notice it says, new mark of authority, the Continental Mark
III. And the ad also calls out that the Budd Company is making parts for 29 different cars.
Not sure what the other 29 were, but certainly the affiliation with Lincoln was one, as I said,
they were proud of. And one that dated back even a few years, even dating back to this particular
advertisement for the 1964 Continental, which incidentally was also a unibody car. In fact,
Lincoln went to unibody construction in 1958 when it introduced the all-new vehicles with kind of
the canted headlamp look. Those, believe it or not, despite their 131-inch wheelbase,
are unibody vehicles. They're absolutely massive. And the Budd Company was a key supplier there.
I suspect that Lincoln contracted with them after the success that Budd had on the Nash vehicles.
And well, Budd helps certainly with the engineering and executed quite a bit of the
stamping of those 1958 vehicles. And I think that was really the start of a great relationship
between Budd and Lincoln that continued on into the previously mentioned Mark III, as well as Mark IV.
Now, the Budd Company did more than just automotive. They produced rail cars, among other things.
But the key focus for this particular video was just helping educate the viewer about
a key supplier that really helped improve the quality and deliver high-quality products to
a number of vehicles, most particularly, I would say, the Lincoln lineup. And if you look at
Lincolns and the gaps that they have, and you compare it to the Cadillacs of the era,
the Lincolns, I have to admit, are just better. They're better built. They have better stamping
quality. And they really are just beautiful vehicles, in part because of the work the Budd
Company did. Hope you enjoyed this little feature on a key automotive supplier back in the day,
the Budd Company.
