#canon#canonEOSC50#canonsetupguide Ignite your storytelling with the EOS C50—the compact, full-featured cinema camera is engineered to shatter boundaries. At its core lies a 7K Full Frame CMOS sensor, delivering 3:2 Open Gate internal recording that gives you the ultimate flexibility to crop for widescreen or vertical social content without losing detail. Experience the raw intensity of Cinema RAW Light up to 7K/60P, or capture high-octane action with 4K/120P for stunningly smooth slow-motion.
Dominate every shot with next-generation Dual Pixel CMOS AF II, ensuring razor-sharp focus even in the heat of production. The C50 is a connectivity titan, featuring built-in Frame.io Camera-to-Cloud integration and XC protocol support for seamless remote control over IP via Wi-Fi® or USB-C. Need to switch gears? Pivot to Photo mode and snap incredible 32MP stills. With a detachable handle adding dual XLR inputs and tactile zoom control, the EOS C50 packs elite technical prowess into a package that practically fits in your palm.
Join Paul Hawxhurst, Senior Technical Specialist at Canon U.S.A., for high-speed tips to get you shooting video with the EOS C50 right now!
Hey, I'm Paul Hawkshurst of Canon USA, and I have some quick tips to get you started
shooting video with your brand new EOS C50 camera. Right off the bat, I cannot stress this enough,
you need to become intimately familiar with auto black balancing your camera.
You see, the photosites on a CMOS sensor have a memory, and over time, as heat builds up,
external environments change, and the sensor's electrical state fluctuates due to ISO changes.
It all compounds to affect the quality of the pixels, and phenomena like stuck pixels or an
increased noise level can result. Auto black balancing, or ABB, is the countermeasure to this,
as it essentially refreshes your sensor to a true black level.
ABB is found on page 8 of the camera setup menu. Select ABB and follow the prompts.
It takes about 40 seconds, and don't worry if you forget to cap the lens port,
the camera will let you know. So at the very least, do this once a day before you start
shooting, but if you're shooting all day long, try to do it during a lunch break if you can.
The more you can do it, the better for the health of your sensor and your image.
The most important decision you make when setting up the camera is choosing the right
picture profile for the job at hand. This will end up setting the look for your image by selecting
the gamma and color space, and it can be a daunting choice. But to get you started,
we offer 9 presets in the camera. Canon 709, Canon Log 2, Canon Log 3, YDR 709,
Standard 709, HLG, PQ, EOS Standard, and EOS Neutral.
If you want to work in a what-you-see-is-what-you-get type of environment,
and you don't want to spend all your time in post working on color correction,
then one of the BT709 options would be a good choice. Shooting with 709 means that you are
making your exposure and color decisions based directly off what you're seeing on the LCD screen
or an external monitor, and that will be the image that is baked into your file.
Canon Log 2, on the other hand, offers the most dynamic range available to the sensor,
but you need to spend some time in post color correcting the image and applying a transform
to the log footage to get it into a viewable state for most monitors.
If you have the time and resources, this workflow is how you'll get the most out of the images for
the camera, but it does take some work. HLG and PQ are high dynamic range profiles meant for HDR
broadcasts, and EOS Standard and Neutral are made to match Canon picture styles from the R series
of cameras. Overall, you're probably going to want to default to a Canon Log or 709 custom
picture option, but if you're new to the ecosystem, I vehemently suggest doing some
picture tests with each profile to see what's involved in their workflows. In the end,
it's going to come down to a per project basis as to which picture profile is right,
but it doesn't hurt to have all working knowledge of all these presets.
Something really cool about the C50 is the inclusion of zoom rockers on both the camera
body and the top handle that can drive servo zoom lenses, like our RF 24-105 2.8 with the
PZ E2 attachment or our CineServo line of lenses. That's all well and good, but the C50 also has a
new digital zoom feature available when using a non-raw codec. This uses sensor resolution to
zoom up to four times as it scales from 4k to 2k, no matter what RF lens you're using.
This could be extremely useful, especially if you know you're delivering in a 1080p.
Give it a shot, it's not as destructive as you might think. You can find this feature
on page 7 of the camera setup menu. Alright, so leading up to the release of this camera,
there's been a lot of talk about full frame 3-2 or open gate mode, but let's not forget
the other sensor modes, especially the super 35mm and super 16mm crop modes.
One thing about the super 35mm mode is that you get a little bit more dynamic range when using it
compared to the full frame modes. But besides that, you shouldn't disregard it just because
it's a smaller sensor size. After all, the vast majority of movies and television shows you've
seen were, and still are, shot in this format. And by denying it, you're missing out on some
incredible lens options made specifically for super 35mm, like the Cooke S4s or the Zeiss
Master Primes. When you move down to super 16mm, you can find some truly unique optics.
My favorite lens of all time is the Canon 8-64mm zoom, and it was made to only cover 16mm. And
there's even a crazy set of super 16mm Zeiss Superspeed Primes that uses a triangular aperture.
The point is, don't be afraid to utilize all of these sensor crop modes to explore the beautiful
bounty of unique and legendary lenses. Give your local cinema rental house a call, and I bet you'll
find something really cool that may just end up becoming regular and part of your kit.
There are a lot of recording formats in this camera, and choosing the right one can be
overwhelming. You have Cinema Raw Light with its HQ, ST, and LT flavors, Standard XF-AVC in either
Intra or Longa, MP4-based XF-AVC-S, and XF-HEVC-S, the High Efficiency Codec. All of them can net you
great results, but the decision really comes down to image quality requirements, editing workflow,
card space usage, and overall project requirements. So I highly suggest taking some time to test them
and see which one jives with you and your workflow. The flexibility of RAW is great,
but for many, it's not efficient enough to be their daily driver. And while XF-AVC has been
the established standard codec for some time, XF-HEVC might be just as easy to use now in your
editing system, and that could net you incredible data savings for your project. The dual base ISO
in this camera can be a powerful tool to getting clean video in low light situations, but you have
to use it properly. The very first thing I suggest would be to set one of your user buttons to base
ISO. Therefore, you can just toggle between the bases without having to go into the main menu.
Next, choose the base ISO you want, then change your ISO setting as normal. Just make sure not
to confuse the base ISO labeling in your on-screen display for the ISO level that you're actually set
at. Now, for the best noise performance, try not to exceed your base ISO. For example,
if you're at base 800 and you want to shoot at a 3200 ISO, it is much better to change your base
ISO to 6400 and then pull down one stop to 3200 rather than push two stops from 800. These were
just some quick tips for getting started with the C50, and we'll follow up in the future with some
more in-depth videos on Cinema EO's workflow. If there's something you'd like to see us do a deep
dive on, drop a line in the comments. Thank you for watching!