Anyone who has run a machine knows how long it takes to set work offsets. What if you could do it in a fraction of the time? It turns out you can, and it's easier than you think! Watch as Mark walks you through the process of setting your work offsets using a probe and learn a few other probing tips along the way. Don’t miss any TIP-OF-THE-DAY videos. Click here (http://ow.ly/s28l30mTiUo) to join our email list! If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks! Follow Haas: Facebook – / haasautomati. . Instagram – / haas_automa. . Twitter – / haas_automation
AI Generated·May contain errors
Video Summary
AI Generated
This video provides a comprehensive guide on using the Haas Wireless Intuitive Probing System (WIPS) to automatically set work offsets. It demonstrates how to use various probing cycles to locate part corners and surfaces, reducing manual setup time and increasing precision through automation.
Well, hello and welcome to this Haas Tip of the Day. Now, I'm excited about today's tip because
it's all about probing, one of my favorite topics. In this video today, we're going to show you how
you can probe your parts and set your work offsets. So, excuse me for one minute. I just have to go to
my offset page and answer a few questions. Stick with me. I'll make it worth your while.
Gotta set my length and my width. Okay. So, what I've just done is commanded my machine to probe
my part for me. This is not some sales gimmick. When I walked up to the machine, nothing was set.
I did everything during the intro to this video. All I did was jog my probe above the part,
answer a few questions, and press cycle start. And the machine did the rest. In fact, it's done.
It just set my X, my Y, and my Z work offsets automatically. This is pretty cool. So,
stick around. We're going to slow things down and walk through probing your parts step by step. And
we'll be sure to point out some cool and perhaps little known probing tricks along the way.
Everyone is talking about automation these days. And when it comes to machining,
automation starts with your probing system. Now, I'm standing here in front of a Haas
VF2SS that's equipped with our WIPS system. Now, WIPS stands for Wireless Intuitive Probing System.
And this system is comprised of a spindle probe. We use that to probe our parts.
We've got a tool setting probe. We use that to set our tools. And then we've got a sensor that's
mounted to our enclosure that communicates with those two probes. Now, that sensor is also known
as an OMI. That's Optical Machine Interface. And our tool probe can also be called an OTS,
or Optical Tool Sensor. Our spindle probe also goes by work probe or OMP, which is Optical
Machine Probe. Now, Haas has made the probing process incredibly simple. Once you've walked
through it a couple of times, you'll be able to probe any part or tool. So, let's walk through
it a couple of times. Now, there are a few different ways to get to the work offset probing
cycles on your next generation Haas mill. But I think the easiest is right from the offset page
while in memory mode. So, we're going to press the memory button, then the offset button to
bring us there. Now, this video is all about probing your work offsets. So, you might have
to press the F4 button to toggle over to your work offset page. Once you're on the work offset page,
you're going to want to use the cursor arrows to arrow up or down to highlight the work offset
that you'd like to set. In our case, we want to set G54. So, we'll highlight G54. Now, our X,
Y, and Z columns are blank. And we don't want to fill these in because the probing cycles are
going to do this for us. We're going to want to use the arrow key and arrow over to the right
until we get to the probing cycles, the probe action column. So, with G54, that row still
highlighted, and now the probe action column highlighted, we're going to choose which cycle
we'd like to use. Typically, with most of these cycles, we're only going to probe the X and Y
location. Then we come back with a separate routine that probes just the Z. Now, the part
that I've got loaded, we're going to go ahead and probe the outside corner, that back left
corner. So, I'm going to look on my list, and it's going to tell me that number nine,
the number nine cycle outside corner, will do what I need it to do. So, I'm going to enter nine
and press enter. Now, we just follow the on-screen instructions, select probe action,
then press part zero set to move to VPS. VPS is a visual programming system.
Now, right off the bat, there's a picture showing us where our spindle probe needs to be located.
It might be best at this time to exit where we're at, go back into hand jog mode,
and jog that spindle probe above the part where it tells us to in the pictures. With that done,
I'll go back to my offset page and press part zero set. It brings us back to those
VPS probing templates. At this point, it's just fill in the blank. It's really easy. No matter
which cycle you choose, just answer the questions. What work offset? 54 because we're using G54. We
could change it. Next, which corner do I want to probe? We're going to go with number four,
that back left corner. How far from the left edge do we want it to probe? And there's more
instructions that are given here in the bottom of the screen. We have a four-inch block,
so I'm going to enter two inches, probe right in the center. Same question for the Y-axis,
three-inch block, I'm going to probe at 1.5 inches. And the Z, how far do I want my probe
to move down before it takes those X and Y probe hits? Now, if you've got a funny boss,
you might have to be real careful what you do here, but my part's pretty straightforward. I
just have a piece of raw stock, so I'm going to leave the default value at Z minus 0.5. All of my
questions are answered. I can export this program by pressing the F4 key, and I can send this
program out to MDI or the clipboard to copy into a program in memory. But in our case, I'm just
going to follow the instructions and press cycle start to run this cycle in MDI. And just like that,
we're all done. But actually, we're not done yet. Hold on. We've set our X and Y. The probing cycle
wrote to my offset page for us, but we've still got to set that Z. To set the Z-axis, we're going
to arrow over back to that probe action column, and this time we're going to select number 11,
single surface. Follow the on-screen instructions, press part zero set, and it brings us to our
single surface probing cycle. Now, this cycle will work for your X, your Y, or your Z-axis.
We're going to enter in a Z value. I'm going to enter minus one inch. Okay, so I need to jog my
probe just above my part, and then I can press cycle start to run it. Now, why did I enter minus
1.0? I'm about a quarter inch above the part. You don't want to enter a number much bigger than what
you need, and this is why. If I had positioned my spindle probe, let's say, off the part by accident,
and I had entered Z minus five inches, the probe would go down five inches, and it might hit the
probe body if the probe tip were not triggered. That's a bad move. By entering Z minus one inch,
what you're saying is that the spindle probe should probe in the Z minus direction, and if
it doesn't get triggered by some surface within one inch, alarm out. It's going to give us a 1093
surface not found alarm, but we've got a real part in there. My spindle probe will touch off
on the top of the surface, and when it does, it's going to write that work offset to my G54 Z offset
table. Well, we showed you how to probe with just a couple of the available cycles, and we showed
you how to do it from what I thought was the fastest way from our offset page, but there is
another way. We can access these same probing cycles from VPS. That's our visual programming
system. To get there on a next-gen control, you're going to press the edit button and arrow up and
over and down until you get to those spindle probing cycles. Now, all of those cycles that
were listed on the offset page are also listed here. We can probe a bore or a boss or a single
surface. While I'm looking here at probe a bore, it actually shows you where to position the spindle
probe if you wanted to probe a hole, and when you probe a hole, a bore, it writes to more than the
work offset, more than just your X and Y location. It also stores a bore diameter, but where does it
put that information? Well, there's a little secret here, and I'll put it up on the screen for you
right now. The size of a feature that's being probed is actually stored in macro variable 188,
and you can have your angle values, if you were to probe an angle, listed under variables 189 and
192. You can use your timers and counters display page on the main page to display this information
if you like, or you can use it with a macro statement. We made an entire video on how to
get these variables to display on your control, so check it out. Okay, back to my cycle.
We've got our webs and our pockets, and we come back down to our outer corner. Now, I showed you
how to use the outer corner cycle because most of these cycles only probe and write to our work
offset in the X and Y axis. Then we need our number 11 single surface to write to our Z,
but for a block like this, we do have a cycle that probes the X, the Y, and the Z all in one shot.
In fact, that's a cycle that I used at the beginning of this video during the introduction.
It was our number 12 vice corner cycle. This is my favorite cycle because it probes the X, Y,
and Z all in one shot. Not all cycles do that, so if you're just probing a piece of raw stock,
number 12 vice corner. The final cycle on this page is our angle corner measure cycle.
This cycle can actually probe the angle of a part, and it writes that angle to macro variable
189 or 192 like that chart that we showed you earlier, so there's more information available
to you than you might think. We made an entire video on how to probe that angle,
so be sure to check it out. In fact, we're going to be making more videos on how to probe your tools.
We're going to be making videos showing you how to probe from within a program,
check the distance between one feature and another. We can poke a yoke. We can make sure
that a part is loaded correctly in a vice using our probing system, so be sure to subscribe to
this YouTube channel because you don't want to miss any of those upcoming videos. Thanks for
letting us be a part of your success and for watching this Haas Tip of the Day.