Making Furniture Out Of Clay

Artistic ceramics
10 followers
2 Video Views·Jul 2, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedAn artist recreates a ceramic stool inspired by Milan Pekar, navigating technical hurdles like premature drying and structural cracking. Through a meticulous process of extrusion, slow-drying, and experimental glazing, the creator transforms a risky project into a finished piece of functional art characterized by a unique, textured aesthetic.
This video was sponsored by Squarespace.
I was browsing for stibs, as you do,
and I came upon this stool by Czech artist Milan Pekar.
I love this stool, and I'm pretty sure
that my red clay fires to nearly the same color.
I'm also pretty sure I have nearly the exact same glaze, so.
Now, the construction of this stool is fairly simple.
It's not easy, but it's simple.
Basically, it's just a series of tubes,
and believe it or not,
I happen to have a perfect extruded eye for this.
I don't think I've used this extruded eye more than once,
and that was for the air conditioner,
the first air conditioner video that I made
two years ago, three years ago?
But luckily, I'm a pack rat, so I still have the tie.
That's unfortunate.
The knobs are bumping into my tube.
Why was that designed that way?
It's a little ovular, but maybe I can fix that.
Should have planned for this.
I need, like, a pool noodle or something to stick in it
so I can let it dry on its side.
Or we just try it.
Let me see if it's gonna flop itself.
No, it's definitely flopping.
No, no, no, no.
Okay.
This one might be ruined now.
Okay, I feel like that's fine.
I mean, I don't know if it's gonna fall over
in five minutes.
Is it gonna stay?
Maybe I don't need to make them all so long.
Why do I need to stick in there?
Like, all I can think of is, like, a pool noodle right now,
but I don't have a pool noodle, unfortunately.
He just needs to dry for, like, maybe an hour
before he should hold himself up.
So I made 16 tubes.
I sort of calculated how many I would need,
and I made all of the ones I need plus two extra.
So I feel like I just need to let these dry out now.
I can't really manipulate them until they're more firm.
So I think what I'm going to do is let them sit like this
for a few hours, and then maybe later today
I'll cover them with some plastic
so that they don't get too dry.
And then tomorrow we'll get back to them.
Okay, so I did something kind of dumb.
I forgot to cover my tubes last night.
And this morning I gave them a good spritz
with a water bottle, and I've covered them.
They're a little on the dry side.
I'm hoping they'll still work, though.
Let's see.
So here's my little drawing.
So I realized that the tubes are a little bit too wide
for this project.
They will work for some parts,
but I do actually need to narrow some of the tubes.
I'm hoping that I can do that.
Basically, there's four main parts.
There's the seat, which will have narrower tubes.
There's the seat frame.
There's the legs, and then there's the supports.
And the supports and the seat
will both have more narrow tubes.
And I think the order that we should approach this is
I'll make the tube smaller than I need to make smaller.
I'll make the seat frame,
and then I can upside down build up the legs,
add the supports, flip it, add the seats.
It's not easy, but it's simple.
This is what I'm thinking.
And I need to be very mindful of my kiln dimensions.
35 centimeters tall and 40 centimeters wide.
The stool won't be able to be 40 centimeters wide
because it's gonna be a square fitting in a circle.
So I have it about 26 centimeters here.
Let's see.
First step is to make some of these tubes more narrow.
Let's take a little break
to talk about today's sponsor, Squarespace.
If you've never heard about Squarespace before,
they are an all-in-one website platform
that artists and entrepreneurs use
to stand out and succeed online.
I've personally been using Squarespace
ever since I started my online business
because it has incredibly easy-to-use features,
including their drag-and-drop website builder
and integrated SEO tools.
Whether you're just starting out
or managing a thriving brand,
Squarespace makes it easy to create a beautiful website
to sell anything from physical products to memberships,
digital products, and even services.
You can also schedule appointments,
create on-brand invoices, and send newsletters.
And for the artists watching,
I know you will love their cutting-edge design tools,
where you can create a bespoke website
that perfectly fits your brand or business.
So head to squarespace.com right now for a free trial,
and when you're ready to launch,
go to squarespace.com slash potterytothepeople
for 10% off your very first website or domain.
Now let's get back to the video.
Okay, I've got them back here,
and I keep spritzing them with the water bottle.
They are indeed a bit too dry,
so I am quite worried that they're gonna start opening
along those seams.
I can put the seams on parts
that will connect to other parts,
so maybe that will save them.
We shall see.
But I think the next step now
is to make the frame for the seat.
So I have to choose my tubes wisely.
How am I gonna do this?
So I didn't do a very good job
of cutting these edges at perfect 45-degree angles.
So the attachment of these four corners
was a little bit wonky,
and on top of that, it's just a touch too dry.
Like, I want the clay to be quite firm.
This piece is perfect.
Like, you want it to be quite firm,
but then parts of it are, like, breaking.
You see?
Depending.
Like, some sides are drier than other sides.
Anyway, I am really worried about cracking with this piece.
I feel like I kind of messed this whole thing up
right at the very beginning
with letting my tubes get too dry,
but I am still gonna hope that it's going to work.
Like, it could still work.
Stranger things have happened.
So I need to, like, let this chill for a little bit
and firm up.
I might just let this sit for, like, 10 minutes,
and then we're gonna move on.
What I don't wanna do is let this sit
and homogenize till tomorrow
because it's just too dry.
I would like it to kind of chill in its own,
in its new shape and settle in,
but it's just too dry.
I can't do that.
So I'm going to set this aside for now,
and then we can prepare the rest of the tubes,
and hopefully by the time those are prepared,
we can start building the legs upward from here.
I saved the straightest ones for the legs.
Let's see.
I don't actually need that much.
So when I place the legs,
they're kind of, at least this one,
kind of going out a little bit, which I do like,
but, like, I didn't calculate for that for the kiln.
Luckily, I have this thing.
This is basically a stencil of my kiln.
Yeah, and it just fits.
So we're gonna go with these slightly fertile legs.
I actually think it looks really, really cute.
I'm getting very excited.
I just had a realization
that I should probably cut out this inner part
before I attach them
because that's going to allow it
to move a little bit without cracking.
I can just, just barely fit my hand in there
because I'm worried about cutting it out
and then I push it down
and then the whole thing sort of starts to collapse.
But if I push it down and then hold it up on the inside,
kind of, like, tuck it in like that,
I feel like that might work.
Let's give it a try.
I have to cut out this one as well then.
I'm not gonna cut exactly to it,
but I'll leave a little bit of a gap.
It's a little tight, but I'm sort of bending it upwards.
Oh, God.
What would I do if I had bigger hands?
Oh, my God.
Okay.
I'm going to carve back the majority of this coil,
this blended coil,
but that will be a tomorrow task.
See, this is what I was worried about.
We have a stress crack.
I did not connect these well enough.
And at this point, there's very little I can do to fix it.
I can slip.
I can score as much as I want,
but such a crack is deep
and I don't know how to explain.
I can make it, like, look like it disappears,
but it's probably gonna come out in the kiln
and that is a huge bummer.
That is a huge bummer.
I'm gonna try.
I'm gonna try everything I can.
I'm gonna attach, like, a sort of, like,
bandaid to it right now.
There's, like, a 25% chance that it will work.
So we take whatever chance we can get.
Okay, I've kind of gotten a little sad
because I feel like I ruined everything
at the very beginning.
And it's looking so good
if it wasn't for that stupid crack that appeared.
And that really, it just makes me think
that more cracks are going to appear.
And I was debating this morning,
should I just re-extrude all of the tubes and start over?
But I don't want to waste all this clay.
It was, like, a bag and a half of clay.
I really want to make this work somehow.
So I can't work on this anymore today
because it's clearly showing weakness in the seams.
I need to wrap this up, let it settle, let it chill,
and I'll get back to it tomorrow.
I'm gonna spray this with some water
and I'm going to wrap it really, really tightly,
especially the tubes that I haven't used yet.
I'm going to wrap up really, really well
and hopefully it's in a better condition tomorrow.
I did bandage up the crack as much as I could.
It's up to the kiln gods now.
I did make an incredible amount of scrap.
I also have two extra tubes.
This one is kind of messed up.
I'm going to save these as well.
Anything that gets tossed out is just going to be reclaimed.
So it's not really wasting the clay, but I don't know.
Reclaiming is no fun.
Fits, but just barely.
Hopefully it will shrink a little bit as well.
Good morning.
I'm in the studio a little bit earlier
than I normally would be
because I'm just so anxious about this piece.
It is very possible for these cracks
to kind of come out overnight.
So we shall see.
Actually, it looks okay.
That doesn't mean that we're in the clear quite yet,
but it's a good sign.
Okay, I'm going to tidy this up now.
And then I think the next step is to add the crossbars
before we flip it over.
I might need to let it sit
and homogenize again one more night
so that it can be strong enough to flip it
because we need to flip it before we add the seat part.
One step at a time.
First, I'm going to tidy up these seams.
So I'm actually pretty happy with this.
I think it was very fiddly,
but I think I did a good job of attaching all the supports.
I am dying to flip this over, but I dare not right now.
I really want this to firm up because once I flip it,
there's going to be pressure going out like this
because of the weight
and that's going to pull these seams apart.
So I need these seams to firm up before I do that.
I have one problem though,
and that is that these cross beams were longer
than I expected them to be.
So I thought I would be able to cut these in half
to make the cross beams.
Turns out I needed the whole length.
So now I only have two tubes for the seats left.
So I actually have to extrude some more tubes.
That's fine.
I can extrude them now and let them firm up until tomorrow.
And then I'll make them smaller tomorrow.
I'll, you know, make the tube more narrow tomorrow.
And then I can attach them.
And that's when I'll finish up the whole stool.
Yeah, we're on a good timeline.
We're in a good place.
I'm feeling slightly more optimistic today
about this project.
Yeah.
Good morning.
We are hopefully going to finish this today.
I'm not going to unwrap my stool quite yet
because I want to shrink my tubes first.
It sounds kind of weird.
Tasks for today.
Shrink the tubes, tidy up our stool,
add the seat, the tubes that I am currently shrinking.
I think that's it.
I really think that we can finish this today.
I really, really think we can.
Now these, I wrapped them in plastic.
This is the moisture level that I was hoping
for the original tubes.
Okay, it's looking pretty good.
I'm just going to tidy up these seams now
and then we can flip it over.
I've set up my laser level so I can try to trim these
so that they're nice and flat.
So the stool will be stable.
Just hoping that my table is flat, you know.
Shall we try and turn this bad boy over?
Question is, is it strong enough to support itself?
It's not so terribly heavy.
Am I going to do this?
Can I just?
No.
I think this might be the cutest thing that I have ever made.
How freaking adorable is this?
Okay, wait, can you even see?
Look at this.
This is the cutest thing.
And so far I feel like it's solid.
Shockingly, shockingly solid.
Like that doesn't mean it's not going to crack in the kiln.
In fact, I sort of anticipated cracking in the kiln
simply because there's so many parts connected together
and it all has to shrink together
and it's not going to want to shrink together.
But shall we start to add the tops?
So there should fit four tubes on here.
I need to trim them still, but let's see.
Left a little bit of wiggle room for that.
And I can always squish them a little bit
if they're too narrow.
And then I have one more tube left.
Potentially, I think, no, it needs to be four.
And I'm going to just squish them a little bit
so they're just like a tiny bit more flattened.
So they take up just a tiny bit more space.
This looks so good, guys.
Okay, I need to decide how much of an overhang I want
or not.
I think approximately.
Okay, I don't have to worry about the top.
I feel like it's the bottom that I have to worry about.
So it doesn't really matter how long I make these or...
I just need to make sure they're not wider than the legs.
And I think they shouldn't be.
I'm thinking I'm going to put the seams facing downward
so that the attachment can help keep the seams together.
That feels logical to me.
Okay, we're going to make them 27
because that is the length of the most narrow tube.
What do we think?
This guy's a little squished, huh?
Stop being so squished, please.
Yes.
I am feeling cautiously optimistic about this bad boy.
I think he looks really good.
I think there is a chance
that it doesn't get completely cracked in a hundred places.
So I made the decision to just connect these guys
to the support structure and not to each other.
Hopefully that gives them a little bit more room to move.
Cracking wise, I'm mostly concerned about these seams,
the cross beams attaching to the legs and this.
Like it's just a square
doesn't really allow for much movement, you know?
I'm basically done now.
I think what I'm going to do is wrap this guy up
really good, let him homogenize for one, maybe two days.
And then I'm going to come back
and just do a little bit of tidying.
There's a few scoring lines and whatnot
but I'm going to do that off camera.
That's not interesting.
Mostly I'm going to let this guy slow dry,
like really, really slow.
So under plastic and then under lighter plastic
and then under cloth, just slow, slow, slow
over the next week or two.
Slow drying is the main way
that we're going to prevent this guy from cracking.
Yeah, so that's my plan.
I'm really excited.
So I'll see you guys when it's dry.
This bad boy has been drying for two weeks.
I would like to try and put it into the kiln today.
I want to believe it's fully dry.
All logic says it's fully dry.
I am just nervous to fire this.
I just have to bite the bullet and put it in.
Just have to do it.
Okay.
Good.
Beautiful.
Wow.
I'm going to say that's a perfect fit.
Look at that.
It's a bit tight,
but it's enough with the room that I feel comfortable.
Okay, be good.
Cross your fingers for me, please.
Kiln is cool.
Let us hope that we don't have any explosions.
There is that one part on the top,
the top frame that is like mostly closed
except it's open to the legs.
This is the part I'm worried about.
Okay.
Looks good.
We have no explosions.
This color is kind of crazy,
but I promise it's going to look better when it's fired.
This looks really good.
I do not see a single crack.
I think the only thing that I'm disappointed with
is there's still some scoring marks that I missed,
but I'm kind of hoping that I can cover that up with glaze.
I'm a little bit worried about glazing this thing.
I'm not exactly sure how I'm going to do it.
The easiest thing is if I had a bucket that was big enough
and I would just dip it in,
but my buckets are a little bit too small for that.
I'm going to have to do this kind of wild and wonky.
And then the glaze,
the glaze effect that I want is green.
Look, this is actually two glazes
layered on top of each other.
So I'm going to have to do like double the pouring.
I think I need to do this in two steps.
Step number one,
I need to glaze it on its side
so I can get the inside of these.
Something to catch the glaze.
Pour it.
And then I think I'm going to turn it up like this
so I can get the legs.
I do want to leave a little bit of the legs unglazed.
Mask that off with some masking tape.
Okay, I am nervous about this process
because I feel like it's going to make a big mess.
But there's no way around it.
Like the best solution would be to have bigger buckets,
but I'm not going to buy a bucket just for this process,
just for this project.
I'm not going to buy a bucket.
So we shall see.
That worked?
Question mark?
I think.
I guess I need to do the whole process
and then I can go back with the green.
I am worried that my glazing is too thick.
In case you're wondering.
I'm worried about that too.
Okay.
I've done as good as I can.
I'm actually surprised that this clay
is not totally saturated.
I wonder, I should probably let it dry out a little bit now
before I apply the next layer,
but I kind of just want to get this over with.
It's going to be quite like blobby and imperfect
and the white will show through more in some places
and less in other places.
So it's going to be fine.
As long as the vast majority is covered, which it is.
If it's too thick, I do not know,
but at least that first part is done.
Now we can move on to the green.
If you have like a suggestion
for what sort of bucket I need to get here.
Cause I was thinking like,
what would be cool is to have like this giant,
you know, like the bath tray that babies take baths in.
Do you know what I'm talking about?
Something like that.
Or should I just get like a giant bucket for the studio
that I can use for these types of projects
that I can just pour the glaze in,
dunk it and pour the glaze back out.
I don't know if I would have enough glaze
to make that worth it.
I don't know.
I really like the size of these buckets in general.
I don't want to get massive buckets for all of my glazes
because then you have to like buy more glaze.
I think these are 25 liters.
I feel like they're like the perfect size.
Obviously not for this piece.
I think I need to take a proper break.
I really should wait till tomorrow
to let this dry out completely,
but I want to get this done.
The good thing is the project itself is like,
okay with being a little crazy.
Like the original piece is very patchy and weird as well.
So it should be fine.
Just need to be really careful where I'm touching it.
So I don't pull the glaze off with my fingers.
Okay, here is the current situation.
You can tell it's totally saturated now.
Like all that darkness in the glaze,
that's saturation, saturated bisque.
So I am going to let it dry until tomorrow
before I try and load it in the kiln.
I'm probably going to have to do a little bit
of patching tomorrow as well.
But the reason I wanted to get all this done today
is because I just want to get the messy part out
so I can launder my clothes
and not get messy again tomorrow.
Anyway, I do think he is looking good.
I feel like this glaze, it's applied fairly thick,
but I also feel like this glaze is fairly forgiving.
So we'll see, I'm not sure.
Like the worst case scenario
is that it starts to pull away from itself
and I get these bare patches,
but only one way to see if that will happen, I guess.
And you please write down below in the comments
if you have any tips for like a better glazing situation
for a big piece like this,
because I do enjoy making big pieces.
♪♪♪
Okay, I think this is good enough.
I'm just gonna call it with this one.
I was debating like, should I pull back some of the drips?
But the issue here is that the very thick glazed parts
could like pull away from each other
so that it reveals the clay underneath.
That happens sometimes when the glaze is applied too thickly.
At the same time, I feel like the more I tidy this up,
the more I'm gonna make it look worse.
Sometimes it's okay.
Like, I feel like this project is a perfect example
of like, we're just gonna kind of lean
into the sloppy glazing of it.
It's gonna look kind of chaotic.
It's gonna look fun.
We will see.
I'm hoping that we get lots of like cool textures
and drips and stuff without getting that pulling apart.
I have no idea if that's going to happen.
I've definitely had that with this glaze combination before
where it does start to pull apart.
So easily, easily could happen.
Let's see.
Only one way to find out.
The other thing I've done is I've put a kiln shelf
in my kiln on the bottom
that already has one glaze drip on it
so that if I get more glaze drips, it's fine.
That kiln shelf is already a little bit messed up.
I'm not going to be heartbroken.
I think that removing the glaze up to a certain point
is certainly helpful to prevent glaze drippage,
but it might still happen.
A glaze piece could just drip
like down from the middle here, for example.
Okay.
I'm going to very carefully pick this up now
and put it into the kiln because at this point,
any little touch in the wrong spot
could knock off a chunk of glaze.
Did not breathe for that entire process.
I think I didn't knock off any glaze, but all right.
This was a doozy of a project.
Let's hope it works.
Kiln is cool.
I hope my glaze looks okay.
Okay.
This is not looking how I expected it to look.
Okay. What do we think?
It just looks so completely different than I expected.
So it's kind of hard for me to see it clearly
because I feel like it looks wrong
because it's not what I pictured in my head,
but I'm trying to like clear that out
and see it for what it is.
And I think I like it.
So this kind of crazy texture that we have going on here
is not something I normally do.
A lot of potters do this
and they try and get these crazy effects.
I don't know.
It's something that just never really appealed to me,
but I kind of like it on this piece.
There is so much depth to this glaze.
Like I think I wouldn't like it
if it just had this kind of brown,
like you see where the brown's coming through
and then on top of it,
this is the color that it's supposed to be.
This kind of white behind the green.
I wouldn't like it if it just had that,
but it also has this very dark part
and like little splotches everywhere.
There's like a very big white splotch here,
all these different effects.
And I feel like that is what saves it to me
because the glaze has depth to it.
It doesn't look like a mistake,
even though it sort of is,
but we don't have to tell anyone that.
These parts you see here,
this is where like the glaze is too thick
and it's pulling away from itself.
But in context of this whole piece,
if we just zoom out for a second,
I feel like it works, surprisingly.
But also the real test is how it looks in the garden.
So let's go take it up right now.
So I've put it next to my little, my other stool.
I don't know if you've seen this guy,
but I made him in my studio maybe a year ago
and they're like a nice little stool, stool set, huh?
I think it looks very cool.
It's pretty comfy.
It's a little low, but that's all I can fit in my kiln.
I don't know.
I think it looks really good.
All right, friends.
I hope that that was a fun video for you today.
I will see you in the next one.
Bye, friends.
