10 Designer Tricks for Making Thrift Store Items Look Expensive

Thrifty Thinkers
9 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides ten professional designer tricks for transforming inexpensive thrift store finds into high-end home decor. By utilizing techniques such as strategic painting, decoupage, and the combination of mismatched materials, the creator demonstrates how to elevate the perceived value of outdated items to create bespoke, luxury-style pieces for the home.
Ever wonder how designers and resellers take low-cost thrift store items and make them look
expensive? Well, in today's video I'm sharing 10 designer tricks for transforming thrifted
finds into upscale decor using simple budget-friendly DIYs. These are some of my
favorite hacks for turning cheap, outdated pieces into stylish, bespoke decor. I'd love to know
which of these tricks you find most surprising. Let me know in the comments. Now, let's get
started. Adding a high-end element to a cheap thrift store find makes it look expensive because
adding just one luxury detail elevates the item's perceived value. I thrifted an inexpensive
candle stand that I'm going to combine with a once-pricey Fitz & Floyd lid. I thrifted just
the lid. It did not come with its original trinket box. I first painted the candlestick with ivory
chalk paint to match the color of the lid. I gave it three coats and then just lightly sanded it,
not to distress it, just to create a smoother surface. Again, to reference the lid, I'm going
to add a floral rub-on transfer in a shade of pink similar to the lily on the lid. It's from
IOD's Rose Botanical Package. I wish I had a lily transfer, but I always try to just work with
whatever I have on hand. Applying transfers to curved surfaces can be a challenge. I find it
helps to cut away as much of the transparency around the design as possible. The top section
applied perfectly, but the leaves on the lower portion had some cracks, so I distressed the
entire transfer to disguise those cracks. Then, to give it a shiny finish like the lid,
I brushed a coat of Glossy Mod Podge over the candlestick. I first filled the glass
candle shade with Blue Rocks from Dollar Tree to simulate water under the lily pad,
but I didn't like how the blue looked, so I swapped them out with some Green Rocks,
also from Dollar Tree. I added a battery-operated votive candle,
but I also think a real candle would look great.
Adding gold or gilding to a thrift store find instantly elevates its appearance,
because gold has long been associated with sophisticated and upscale decor. I thrifted a
frame that already has gold trim, but to emphasize it, I'm going to add two drink coasters that I
spray-painted gold. To add art to the coasters, I printed out two female silhouettes on a page
torn from an old textbook. I used a cup that was about the same size as the coasters to trace
around, so I could cut out a nice circle shape. Because this paper is quite thin, I only applied
Mod Podge to the back of the paper and not on the coaster. I carefully centered the paper in
each coaster and smoothed it out with my fingers. This thrift store frame didn't come with glass
or backing, so I cut a piece of scrap cardboard to fit in the frame. I wanted to create a vintage
looking backdrop for the coasters, so I covered the cardboard with some black and brown gingham
fabric, just folding the fabric edges to the back and hot gluing them in place. To give it a truly
granny chic appearance, I layered a thrift store doily over the gingham fabric. After I had the
doily centered, I held it in place and carefully flipped it over. Then I taped down the edges with
packing tape and placed the cardboard into the frame, which was a really snug fit. Now that the
doily wouldn't move around, I decided to remove the tape and hot glue the doily edges to the
cardboard. To clean up the back of the frame, I used spray adhesive to attach a piece of old
scrapbook paper, but it wasn't sticking very well to the frame, so I applied paper packing tape
around the edges to make sure it stayed put. Then I added a sawtooth hanger to what was once a
tabletop picture frame. Now for the final touch, adding the coasters. I decided that hot glue was
the best option, applying a good amount to the back of each coaster and pressing it to make sure
it adhered both to the doily and to the gingham fabric underneath. There were a few scratches I
was noticing in the frame, so to disguise them, I brushed black wax on the scratches and then over
the entire frame, wiping away the excess. I didn't like the look of the paper edges inside the coasters,
so for a quick fix, I used a gold paint pen along the edges. This only took a minute, but I think it
made a big difference. A well-paired set appeals more to buyers and home decorators, therefore
making previously mismatched thrift store items feel like a set increases their perceived value.
I thrifted a sugar bowl and creamer. Although different, they were both gold, and I'm going to
decorate them as a set to further unite them. I had a small bird nest in my stash, but it was a little
too small for how I wanted to use it. To make it larger, I softened some angel hair vine in water
and then wrapped it around the nest using florist wire to hold it in place. Then I hot glued it into
the opening on the creamer. For additional interest, I added a feather and some small greenery stems.
The eggs that came with the nest were too large, so I used smaller ones that I made from some
leftover air dry clay in last week's video. To coordinate the sugar bowl with the creamer,
I first hot glued the lid in place, and then I hot glued the spoon in the opening. I twisted a piece
of mossy vine around the spoon and added some of the exact same greenery that I used on the creamer.
Next, I pulled the clip off of the bottom of a faux bird and hot glued the bird to the sugar
bowl handle. Then I hot glued some moss under the bird and around the handle. For a final touch,
I trimmed off the transparent border on a dollar tree butterfly sticker and hot glued it to the
nest. Adding greenery or flowers to a thrift store find instantly makes it feel more stylish and
upscale. The fresh natural look makes the piece seem thoughtfully styled rather than just second
hand. This rolling pin is not as old as it looks. I previously painted and distressed the handles
red, one of which was broken, so I just glued it in place with wood glue. The florals I'm using
were once part of a thrift store garland. I grouped some stems together and twisted a piece of florist
wire tightly around them. After they were firmly bunched together, I wrapped florist tape over the
wire and over the ends of the stems. To attach the flowers to the rolling pin, I wrapped another strand
of florist wire around both the rolling pin and the bouquet and twisted it tightly. Then I added
a few more stems under the wire but going in the opposite direction. To create an easy hanger, I
tied the ends of a strand of twine around each handle. Then I tied a strand of ribbon around the
center of the rolling pin over the florist wire. Whenever I think I'm done with a project, I often
add one more thing. This time I printed out a baking image on cardstock and used a small clothes pin
to hang it on the twine. Adding a popular theme makes thrift store finds more valuable by increasing
their charm, nostalgia, and appeal to collectors and decorators. With Easter coming up, I'm going
to use a Peter Rabbit theme on this birdhouse planter. I first used an orbital sander to remove
the painted design. Then I repainted it with ivory chalk paint. I also painted over the yellow trim
pieces with light green chalk paint to coordinate better with the Peter Rabbit images. The original
Beatrix Potter illustrations are in the public domain, so I printed out a few on regular copy
paper, making sure each image was as wide and tall as the four sides of the birdhouse. I arranged
the front piece in place and marked the location of the perch so I could cut slits in that spot
to keep the paper from tearing. I brushed Mod Podge on the wood and on the back of the paper
and then pressed it in place. I smoothed out the paper first with my fingers and then using the
plastic tool that comes with the IOD rub-on transfers and I cut off some of the extra paper.
I first covered just the front and back of the birdhouse and let the Mod Podge dry for about
an hour. Once it was dry, I used a utility knife to cut off the remaining extra paper along the top
and bottom edges. The side edges on the birdhouse were rounded, so I used a sanding block along
those edges to remove the excess paper. With the front and back done, I could then repeat the
process and decoupage the two sides. When I cut out the hole on the front of the birdhouse, I
unfortunately cut off Peter Rabbit's face. To remedy the situation, I found a rabbit figurine
in my stash that was a good size for the hole, but I needed to cut off the egg-shaped wagon that
was attached. I pressed the rabbit head into the hole and used an entire mini hot glue stick to
hold it in place. Although it looks janky on the inside, you won't see that once a plant is in the
box. There was also a small hole in a top corner on the trim, so I hot glued a tiny bird over that
hole. However, when I was brushing clear wax over the green chalk paint to seal it, the bird popped
off, so I re-glued it, but this time instead of hot glue, I used super glue with super glue accelerator.
Combining even inexpensive items elevates both pieces, making them look like a custom
upscale piece rather than separate thrifty finds. So I'm going to pair this 50-cent box
with a thrift store wall sconce. To make the two disparate pieces a uniform color, I painted them
both with black chalk paint. The box only needed one coat of paint, but the plastic sconce needed
two coats for full coverage. Rather than painting the inside of the box, I decoupaged it with pages
torn from an old textbook. I brushed Mod Podge in the box and on the back of the paper and pressed
it into place. I overlapped pages until the interior of the box was completely covered.
Once the Mod Podge was dry, I used a sanding block along the box edges to remove any excess
paper. I was thinking about how gold accents make items look more expensive, so I thought I'd add
a gold rub-on transfer to the paper. The gold transfers apply just like the traditional transfers,
but they are more delicate, so take your time. I reattached the candle cup that I had removed while
I painted the sconce. I thought the top of the sconce needed a touch of gold too, so I used
Gorilla Glue Clear Gel to attach a photo corner, which I just happened to have in my crafting
supplies. I considered using a small hinge to attach the sconce to the box, but the sconce fit
the box so perfectly that I just added a small screw to the top of the box where the sconce's
sawtooth hanger could grab onto. Then I just needed to add a sawtooth hanger to the back of the box
so it would hang on the wall. Finally, I brushed Antiquing Wax over both pieces to seal and protect
the chalk paint. I like to use Antiquing Wax over black paint because I think it adds extra dimension.
Then I was ready to add some cute decor items inside the box. Items that are both decorative
and functional command higher prices because they offer both aesthetic appeal and practical use,
increasing their perceived quality and value. I came up with a purposeful idea
for this wood block sign, but first I needed to make it fit my style. I sanded off the lettering
and stained the sides of the box with Antiquing Wax. Then I pulled out a bird illustration sent
to me by one of my sweet viewers. To decoupage it to the front of the box, make sure you apply
Mod Podge to the wood and to the back of the paper because freshly sanded wood will really
soak up the Mod Podge. It's helpful to go over the print with a brayer to achieve good adhesion.
Somehow I managed to get a tiny drop of Antiquing Wax on the picture, which I tried to erase with a
white eraser, but yikes, I only made it worse. I'll have to fix that, but for the moment I cut away
some of the excess paper to keep it from accidentally adhering to the box sides.
Once the Mod Podge was dry, I used a utility knife to cut away the remaining excess paper.
Then I smoothed over the box edges with a sanding block to give them a more natural appearance.
I decided to use some typography left over from an IOD rub-on transfer to disguise the damage,
but for some reason it didn't want to stick. Instead the paper was sticking to the transfer,
which left an even larger area of damage. So I decided to put a dictionary's definition of a
titmouse bird over the damaged spot, but I needed the definition to be bigger, so I took a picture
of the definition, cropped it, and then printed it in the size I needed. I printed it on an old
piece of paper torn from an old school workbook to make it look vintage, and then I used a ruler
to tear the edges around the definition. When decoupaging paper to paper, only apply Mod Podge
to one of the surfaces to avoid wrinkles and bubbles. I carefully smoothed out the definition,
successfully hiding the damaged paper underneath. So you must be wondering how I'm going to use
it. Since these wood signs are usually hollow on the back, they are perfect for hiding a thermostat
or other unattractive features that stick out from a wall. My thermostat has rounded edges,
but if yours is flat, you can just rest the box on top of the thermostat. Adding a pedestal or feet
elevates a thrift store find both literally and visually, creating a sense of importance
associated with high-end decor and antique furniture. I'm going to use a tall metal candlestick
as a pedestal for a large wood salad bowl. I'm just going to use a few small screws to attach
the pedestal to the bottom of the bowl. Just use a drill bit for metal and drill at least four holes
through the candle plate and then tighten the screws through the holes and into the base of
the bowl. I'm going to use color to unite the two pieces by painting them both with black chalk paint.
I also painted the rim of the bowl but decided not to paint the interior of the bowl. Even though
the candlestick was mostly black already, I painted it too so it would perfectly match the bowl.
Once the black paint was dry, I brushed on two coats of a pretty blue chalk paint and once the
blue paint was dry, I cut out a floral transfer from IOD's Rose Botanical Package. Even though
the bowl is curved, it's much larger than the candlestick so it adhered perfectly. Of course
it adhered perfectly when I was already planning on distressing it. The reason I first painted
everything black was because I wanted the black paint to show through when I sanded over the blue
paint. I love how distressed paint looks on dark metal. I debated what color of wax to use but
ultimately decided on white because it will add to the cottagey vibe of the blue paint
and the botanical transfer. We all know that upgrading the frame on a print or piece of art
makes it look more expensive, but have you ever considered reframing cheap thrift store art
with a different frame also from the thrift store? This print of children with rabbits is adorable
but the mass-produced 1990s frame makes it look cheap so I removed the print which had been glued
unfortunately to a sheet of cardboard. I'm going to put it in a vintage oval frame so I traced out
the oval shape on the print and used a heavy duty pair of scissors to cut it out. The frame was
scratched up so to conceal the damage I first used gold rub and buff along the inner and outer rims
then I brushed black wax between the rims and on the outside edge of the frame. This did a great
job of refreshing what was already a lovely vintage frame. Before adding your print be sure
to clean the inside of the glass so you don't trap dust or detritus inside. Because this is such an
old frame small nails were used to hold the art in place. You don't have to remove them just try to
twist them as needed so that you can add in the art in the cardboard backing then press them down.
Use paper packing tape over the nails to hold them in place.
You can also cover the back with brown craft paper for an even more finished appearance.
Mixing and combining materials in a thrift store upcycle adds depth contrast and a designer touch
making the piece look custom and high-end. I unfortunately lost the video of my final DIY
but you can see that I combined a metal candle stand that I painted green with a ceramic bird
salt shaker a faux flower and a silky ribbon. Now that you've seen all 10 ideas which one surprised
you the most or do you have a favorite trick of your own let me know in the comments. I love
hearing your ideas and if you want even more ideas for transforming outdated thrift store
finds into stylish home decor here's a video I think you'll like.
