I finally finished my dining set! In this video, I strip the old finish from my five mid century chairs, remove the old fabric, add new batting, new fabric, and a new dust cover on the bottom, and give the beautiful walnut a stunning refinish with Odie's Oil. These desperately needed modernizing and refining, and I'm in love with the whole set again.
Angie restores a set of five mid-century Canadian walnut chairs, including a captain's chair. The project involves stripping a degraded lacquer finish, treating the wood with Odie's oil for a natural glow, and replacing worn upholstery with durable black faux leather to create a sophisticated, cohesive look that complements her existing teak furniture.
Who doesn't love a beautiful curved back mid-century chair? They're so iconic but
sometimes they end up in this condition. Now you may remember these from my December video
where I redid the table. It's finally time to get to the chairs. Now from afar this set didn't look
like it was in terrible condition but if you remember the other video as soon as I got it
in the garage under some lights you can see just how bad that old flaking lacquer finish was.
I found it obscured the grain a little bit. I don't like how plasticky it looks. It looks like
it's coated in plastic. I absolutely prefer a much more subtle sheen when it comes to walnut
furniture like this. Now we've got one captain chair and four regular chairs for a total of
five. This is going to take forever. I hate doing chairs for that reason. But as you can see we've
got a lot of finish issues. I am pretty lucky that aside from poppy chews and some finish
damage, structurally there's not really much wrong with these. There's one chair where the joint,
I'll spin it around here so you can see, there's a slight slight gap. I can just catch it with
my fingernail but I don't even know if that's enough to warrant trying to take that apart and
press it together. Aside from that these are in great condition. We have to replace the fabric,
we have to replace the finish. Stay tuned. My name is Angie and I refinish furniture.
Sometimes I paint and sometimes I don't but I always do what I can to save old pieces from the
trash. Welcome to my workroom. I'm going to start things off here by taking apart the captain's
chair. Pretty straightforward construction as far as chairs go. I've seen a lot more complicated
dining chairs so it's just a matter of unscrewing the seats, labeling everything,
and then moving on to the other chairs. Now these chairs are a little bit different. They've got
the back screwed into a separate spot. Now you'll notice that there's multiple screws of varying
types and lengths coming out. This is very typical with older furniture. People try to
make repairs over the years. We're going to try to marry that up at the end when we put everything
back together. What can be difficult though is if you've got a screw hole that somebody puts a
thicker screw in, you're pretty much resigned to then using a thicker screw from now on. So
we'll see at the end how this pans out. You can see we've got machine screws and regular screws here.
Now this is beautiful walnut wood grain. You're going to see here once we get the finish off that
some of it is solid and some of it is veneered. The curved backs are all veneered. It's multiple
layers that have been pressed into the shape that they're in and the majority of the leg assemblies
are solid walnut aside from the brace pieces that the screws go into. Those are, if I remember from
the table, I think they were poplar or something like that. Now these chairs are Canadian made. You
can see the original label there and under shade it says sage. So I'm assuming that these would
have had a pale green fabric at one point. Hopeful that it might be under here but not 100% convinced.
Although often when people kind of go over top like this of other upholstery they just leave
the original in place but it's going to depend on, I guess, who did this. But before I even know that
I've got five million staples to pull in multiple layers. This is incredibly time consuming. It's
hard on the hands. You have to get in weird positions even with pliers and tools that help
pull the staples out and you definitely want to be wearing safety glasses. I cannot stress this enough
especially with old rusty staples like this. Now pulling just this down a little bit I have a
little bit of a peek here at what I think would have been the original fabric and you can see
it's kind of a cream color with a little bit of a sage green. So the old fabric was definitely
removed at least on this chair but it is kind of cool to get a preview of what it used to be.
And there's another little section here where you can see it better. It almost had like
kind of a paisley sort of design. I think that would have been really pretty with the walnut
when this was new but this is all coming off. Now I was a little concerned about what the foam would
look like underneath. I'm just gonna ugh this seems so gross now. I'll just throw it away but it doesn't
look too bad. You can see there's a bit of compression here. I don't see anything terrible.
It's still got lots of give to it. It's not too flat. I don't see any big gross stains or anything
like that so I am hopeful that I'm going to be able to reuse most of the foam on these. I am going
to try to save the label on at least one chair. If I can save them all and that would be great. I will
adhere them to the new dust cover when I put it on. Is this really necessary? I mean not really
but I like to keep you know evidence I guess of or proof of where these pieces come from when I
work on them so if I can save a label I'm going to save a label. I'm going to be completely replacing
this dust cover. It's old and crappy so I'm just going to pull it off and finish pulling lots of
these staples and little bits of fabric off. I want these completely clean when I'm ready to
add the new fabric. Now this was just one cushion. I have to do this four more times and it took a
good hour to get all of this off. I wish I had some help. And speaking of help, did you know that your
digestion is actually a team project? Your gut contains trillions of bacteria that work with you
to help break down everything that you eat. Daily stress, poor diet, certain medications, it can throw
everything off kilter and that's why it's important to take a supplement like symbiotic
plus daily. Symbiotic plus is more than just a probiotic. It's a prebiotic to help support the
growth of beneficial bacteria and postbiotics help support gut barrier function. A delayed
release capsule is designed to help reach the colon not just dissolve in the stomach. It's one
minty flavored capsule daily and it can be taken any time of day with or without food. Now I have
struggled with my sleep my entire life ever since I was a kid so I was really excited to try out
their sleep bioseries melatonin. This is the newest addition to my evening routine and their bioseries
technology is designed to optimize melatonin release throughout the night to support a natural
sleep-wake cycle, something I've always struggled with. Now the melatonin I've only been taking for
a fairly short amount of time but I've already noticed a difference in how long it takes me to
fall asleep which is one of the two issues I have with sleep. The other is staying asleep. I have
noticed a big difference with that. I also got to try their essential for women multivitamin. It's two
capsules a day. Multivitamins are so important especially if you live a life of chaos like I do
and their protein shake. So initially I tried putting this in a glass and just stirring it
with a little whisk but I filled that up way too much and switched to a shaker. So much better.
Should have just done this to begin with. I think it was my first day on earth. So that's actually
really good. I can't stand it when I'm drinking a protein shake and you can taste like the grains
of the powder. That sort of gritty feeling. This is nice and creamy and smooth. If anything it might
be a little bit thick. I think the next time I'll just add a little bit more liquid because I don't
like it quite this thick. Flavors delicious, super creamy. Yeah that's a thumbs up for sure.
If you want to help jumpstart your health for 2026 and want to try any of these amazing products
from Ritual you can go to ritual.com slash transcendfurniture25 and save 25% off your order.
You can also click the QR code here. I'll leave that up for you for a moment.
I'm using a chemical stripper to remove the old finish from these. Now here on the chair you can
actually see the different layers that they use to create these bended forms. We've got multiple
layers of whatever wood this is and then a thin strip of walnut veneer on the outside. Obviously
with a clear coat like Odie's oil that's going to show up so you'll see in a little bit how I
deal with that. But first let's get the finish off all five chairs. I'm quite fortunate that the
majority of the chair is walnut or at least walnut veneer but these braces are not and that's the
same on all the chairs. So I'm just using some Ceman water-based stain to kind of shift the color
more into the darker walnut tones just so that it blends in a lot better. So just like the table I'm
going to be sealing this with Odie's oil. I'm using the Odie's SuperDuper Everlasting oil here
and it really made the table look great. It leaves a nice natural finish, natural looking,
natural feeling, and a nice soft luster. I definitely prefer this to those high gloss
sort of lacquer finishes that came with these. It's really going to amplify all the variation
and tones in the wood and I think it's going to look great with the material that I have picked
out for the seats. So after applying the Odie's oil to all of the chairs and letting them sit for several
hours it's time to buff everything off. This is my favorite part, it's so rewarding. It does take a
while especially when you've got multiples like these chairs because you do have to get every
last drop of oil off but it's so worth it in the end. If you remember there were a few spots where
uh the previous owner's puppy had chewed so I'm just using some mohawk graining markers here to
kind of fill it in. There's already kind of a dark grain line running down so I'm just going to sort
of amplify that a bit and try to camouflage it. I don't expect this to be perfect but as long as it
blends in I'm okay with that. So I actually went back and forth several times about what to use on
these chairs but we've had this black sort of faux leather up here for years and we bought it
specifically for these chairs. Now if we didn't have cats that have fur and puke sometimes and
pick an actual fabric probably would have been what I chose for these but we need something that's
easy to clean that the cats are not going to pick at and this is what we opted to use. Walnut plus
block is classic every time. So although I'm going to be reusing the foam I do want to add a little
bit of a buffer between this seat and the new material. Part of that is going to be to make sure
that the plywood edges here don't sort of telegraph through the fabric or the material.
So I'm just adding a thin layer of batting. Now let me just clarify here I am not an upholsterer
that's going to become abundantly clear. I know roughly what to do but if this is something you
do for a living don't judge me too hard. These are my own chairs. So this is what my first one turned
out like. From the top you don't really see these pleats. It's so hard with faux leather to get them
perfect. It's a little bit easier with genuine leather. It stretches a little bit easier
but I did the best I could and added some new black fabric on top just to kind of finish it
up and then I did reapply those labels to a few of the chairs. Now it probably seems like we're
zipping through this fairly quickly but to be honest it's literally the same thing for every
chair so there's no point dragging this video to be five times longer than it needs to be.
When it comes time to put the bottoms back onto the seats I just kind of feel through for the
old holes and then punch through the fabric so that I know where to put my screws. And then it's
just a matter of screwing everything back together, giving it a quick little rub down, and on four of
the chairs adding the back piece. So same thing it's going to feel for where those holes are and
then attach those back pieces. Now I just have a couple clips here of me doing this next one just
so you can kind of see what I'm doing. This was for the captain's chair seat. When you have curved
seats like this you want to pull from that raised area first. If you pull from the sides and pull
it tight obviously the fabric is going to sort of tent across the seat. So when you do it this way
it's going to hug into that and work out great. Now you can see there's a few little wrinkles
there don't worry about that we're going to pull those tight. I'm sure there are proper upholstery
staples and even pneumatic staple guns for this. I don't have anything like that so this is what
I'm using. Basically you want to do a few staples on all four sides then you can kind of spread out
a little bit and then the corners you're just going to pull a little bit up at a time to try
to minimize any of the folds there on the corner. It's a little easier with fabric than it is with
vinyl to get rid of those pleats but all in all I think this turned out pretty good
and hopefully you end up with something like this that looks pretty good from the top.
So I'm just going to set that in place and then screw that in. So if I have a look back here at
what we started with um it's a little jarring to my eyes initially actually that fabric was just
so terrible. I mean I'm sure it served a purpose for the previous owners but I am not a fan and
it just wasn't very neat and you know it was full of fur and had been picked a little bit
so I definitely wanted to class these up. Now if you missed the video where I refinished the
table that goes with these chairs I will link it down below so you can watch that
but here is how these turned out. Now I finished these at night this took me a whole day it is now
like 7 30 I think at night it's dark out so when I take these into the dining room you're not going
to be able to see them that well that's why I'm showing you what they look like a little bit here
before we take them over. Now you can see if I'm kind of way down low on the floor you can see some
of those little wrinkles there at the corners but from above any seated position you can't really
see it so I'm okay with how that turned out. The wood absolutely glows with the odies oil
the white marks turned out well enough that you don't really notice them unless you're looking
for them and those areas up at the top here I just sort of ombre effected into the natural green.
I absolutely love how these turned out now I do apologize that I don't have a daytime shot
of the dining room so the lighting is not the best but the cats are very intrigued
and I'm super happy with how well this now blends with our teak console there. As always thank you
so much for watching I hope you enjoyed seeing the set come back together and I'll see you next time.