Can you build a practical, well-rounded Everyday Carry kit using nothing but Harbor Freight?
That’s exactly what I set out to do.
For under $150, I put together a complete EDC/tool kit designed around the way I actually work and carry gear every day. Rather than chasing the cheapest possible setup, I focused on building something I’d genuinely use.
Inside this Harbor Freight EDC kit you’ll find:
• ICON Mini Ratchet & Socket Kit • Gordon Multitool • Warrior Drill Bit Set • SAE & Metric Wrench Sets • Tape Measure • Mini Level • Tire Pressure Gauge • Utility Knife • LED Flashlight • Leather Work Gloves • Zip Ties • Compact EDC Pouch
The goal wasn’t to build the biggest kit—it was to build the most useful one.
I think Harbor Freight has quietly become one of the best places to assemble an affordable, capable tool-based EDC, and this challenge really put that theory to the test.
How would YOU build your Harbor Freight EDC kit?
I’d love to see what you’d swap out, what you’d add, and what your budget would be. Let me know down in the comments! @harborfreight
We are back with another review and today we're going to be continuing a series that I have put
together on this channel where every month I'm going to be going to a different retail establishment
and I'm going to be trying to build the best EDC kit that I can with what they offer at that
location. So let's check out what we got this month from Harper Freight. We got some pretty
cool offerings from them. Now there are a few things that I'm going to mention straight out
the gate that Harper Freight does not carry. At least my location didn't have any. They didn't
have any type of food, medicine, snacks, any of that type of stuff. So no electrolyte powders,
no individual aspirin packs, or any type of medical supplies. The other thing I noticed was
the only type of writing implement I could find was on the wood-ish type aisle where they had
wax crayons to basically write on lumber and to mark on lumber. I couldn't find a pen for the
life of me in there or a lighter. So they said they had torches somewhere but they couldn't find
them. So just that all being said those things are not in this kit because they just didn't have any
of that stuff. You know it's like going to a shoe store trying to find medical supplies. I'm going
to a tool store trying to see if there's any type of medical or you know pad, pen, or any type of
electrolytes or anything like that that I could put in this kit but couldn't find that. So anyway
the long preamble is finished. This is the kit right here. I ended up going with a one of those
coin bags or banker bags. It has a nice gusseted bottom here which sits nice and flat. Is this a
pocket pouch? No. It's an EDC pouch that is tool centered. Something you could throw in your truck.
You could throw this in a backpack. You could throw this pretty much anywhere. It's very lightweight.
We're talking around five pounds with everything that's inside here and you're going to be
extremely surprised with everything that I was able to get. Now on the outside if you didn't
notice I did have a little mini level that I grabbed from Pittsburgh. So it's just a little
mini line level but it also has the feet on here that you can use it as a standard level as well.
That was something for me personally I like to include those in my kits because I use levels
all the time. So let's see what we've put in the bag. Boom there's the scatter pattern. So let's
just start pulling stuff out. Let's start with the gloves. I went with these pigskin gloves here from
Hardy. I love using work gloves. They did have some more sport oriented type gloves but I like
using leather work gloves. They're perfect for me when I'm handling stuff that's rusty or it's got
---- all over it. This is perfect. You know what I'm saying? I don't have to worry about anything
really seeping into the glove and making a permanent you know permanent habitat there if
that makes sense. Next up let's grab up some zip ties. We got a hundred pack of medium size zip ties
here. These are perfect for me, perfect for you, perfect for anybody. Zip ties are a universal
thing that everybody appreciates. Next up we did grab one of these little box cutters. This is from
Gordon. The thing that was cool about this is it does have extra blades. Is it a little bit hard
to use? It's a little bit difficult to be honest with you because you have to press it down and
slide it at the same time and if you don't get it all the way in there you might get yourself a
nick if you know what I mean. So you pull off this little handle and it's got a little blade
rack back here where it has extra blades which is kind of nice for convenience especially if
you want to have different blades for different things. Let's say you want to have a blade
to cut up certain things and you want to have another blade to cut up other things and you
don't want to cross those. Perfect. So we went with the cutter blade. We do have a knife in here but I
wanted to go with a utility knife because I use them all the time personally. Next up we did find
a really nice torch from Braun. This is an 800 lumen flashlight. That's the wide and that's the
focal beam so you just kind of slide this back and forth to kind of get it wide to focal. But 800
lumens from Braun, pretty cool. 200 zoom, that's pretty cool for the wide beam. So 800 lumen
flashlight, pretty nice offering. The bag that we got is from Yukon. It's a 12 inch zipper utility
pouch or I like to call them the banker bags because this is what you usually bring to a bank
with a bunch of money to deposit. So next up we got from Pittsburgh. Here is a ball peen hammer.
I've skipped on the claw hammer for this little kit because you're not going to get much leverage
with a claw hammer but you can use a ball peen hammer to do tons of stuff including setting
nails and everything. So less stuff to get caught on the claw part too. Again, what kind of
leverage you're really going to get with a four inch hammer. But a ball peen hammer, this can
do some work for sure in the EDC kit. I didn't want to pass up on the ability to have a hammer in this
kit if I could fit it, you know what I'm saying? And the fact they had this little mini guy I was like
let's take it. Next up we got is a 16 foot tape measure from Pittsburgh. It's a high vis one which
is awesome. The tape measure and the level for me pretty much go hand in hand. Those two things
are like you know personal for me. Same thing with the zip ties. Those are kind of like a personal thing.
Last thing personal wise I'm going to show you before we get into something that's not
a personal thing that I had to step in here is this tire gauge. I love having a tire gauge on
me at all times. I live in Colorado so the temperature fluctuates significantly. It could
be cold in the morning and hot in the afternoon so tire pressure also regulates significantly as
well and I like to keep up on tire for tire pressure on all my vehicles and all my little
equipment that I have out here. So having one of those on me at all times is perfect.
Next up I had that kind of clip to this little Gordon multi-tool. Now I was very impressed by
this. This was one of those things in this kit that I was like super impressed by. First off
straight out the gate if you hold the button down that normally releases the tools from locking
you can literally slide off the belt clip. I mean how cool is that? Come on they like knew this kit
was for me because of how easy it is to remove the belt clip. So Gordon did a good job on this one.
Let's go through the features that the Gordon has. We have a skinning knife or skinning hook.
We have a serrated blade. We have a saw blade on this side. On this side we have a straight blade
knife. I mean what else could you possibly need? We have a file and a little grinding
sharpening stone right there. That's everything on the outside. Let's open this up. Smooth movement.
It reminds me much like a leatherman to be honest with you. It's not the same
but it reminds me of that. You've got needle nose pliers. You've got normal pliers. You got
wire strippers and cutters right there which is awesome. Then also you have all these tools which
is a little bit driver which you can do flats and phillips on that which I think is really
super convenient. Let's pull out the can opener. On this side we have a set of scissors that fold
out which is awesome. I mean look at those. Those are pretty freaking cool. Then they fold back and
go right down in there. Next up we got is a little precision drive. It's got a phillips and a flat
head on there so if you need to do any precision eyeglass work or pretty much anything. Precision
is important for me. The reason why I like this so much is how many tools it had in here. It
eliminated a lot of stuff. I had pliers picked out. I had a precision screwdriver set and I had
like a bit driver set which I do have that bit driver set in here because I do use bits more
than this kit will offer but I put a lot of stuff away because this pretty much covered it. Pry bar
right here. Pretty awesome. You got some measurements here on the side rails that can
sync up for a crude measuring device but we got the tape measure for that. Gordon I think put
together a really nice little multi-tool here and that's why I featured this in this kit and like I
said I just had it where it was set like to just kind of hold my tire gauge from kind of floating
around the package. We don't want that. Next up from I believe Warrior we got quarter inch
drill bits for my impact driver. This allows me to just grab an impact driver with me and this kit
and now I have an ability to drill holes and stuff and I'm going to have an ability to do fasteners
as well. So Warrior drill bit set. The full set of drill bits I think was like 11 bucks
and that's the thing too I want to mention. Everything I bought here I built this entire
kit for under $150. So the reason why it was so expensive was because I added this which is the
Icon Meme Kit which is the bit driver set and the ratchet kit for this setup. I could have went with
a little bit of cheaper model and made this around a hundred bucks but I really wanted to get this
meme kit for this because it was perfect compact and everything that I needed it to be. This isn't
a budget build from Harbor Freight. This is more so a reasonable build. Let's do that. So we got the
full bit kit the Icon Meme Kit from Harbor Freight which we could use also in the impact if we really
want to. I mean yeah they're not impact rated but they'll be fine we all know that. But anyway
really nice little setup here so far. The last thing I added for good measure I did my second
sweep of the store and I found this which is freaking beautiful. Chef's Kiss. Okay we got a
full set of SAE stubby wrenches here and on this side we have a full set of metric goes up to 15.
Really awesome. I mean come on goes all the way up to five five eights and it goes all the way up to
15 on this. It's got a little handle so you can easily and it stands up perfectly in this little
kit which kind of makes it just need to be in this little kit that I put together.
But this allows me to basically have the smaller of the bit driving meme kit
and not have the sockets the socket version. I got the wrenches you know I mean the wrenches
$11 isn't really I guess a difference for having sockets but it'll do the same purpose for me
over having like just paying double the money for this kit just to get some sockets
and a screwdriver handle. I was like nah this is the kit right here the $40 one is the kit you
know what I mean. So 150 bucks built this whole thing including the bag and I got a full set of
tools for EDC. I mean this is really a great kit this is a great EDC kit from Harbor Freight.
I had a really great time putting this together. I went through the whole store twice and I
basically looked at every single thing that was on the shelf on the end caps near the register
in the sale areas everywhere to see what would be the best stuff I could include in this kit and
this is what I came up with and I tried to do it for a reasonable amount of money under 150 bucks.
So why don't you let me know down in the comments below what do you think of this EDC tool kit
that I put together from Harbor Freight? What would you add to this kit? What would you take
out and what would you use in replacement of some of these things that might suit you better? You
might not use the tape measure, the level, or the zip ties and you might want those gone and you
might want something else here. What would that be? Let me know down in the comments below. If you
like this video give it a thumbs up. Want more content like this subscribe for more and have a great rest of your day.