How To Draw A Realistic Rose

Sketchbook Dreams
81 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis tutorial demonstrates how to create a realistic red rose using a combination of alcohol markers and colored pencils. The artist explains a layering process that begins with a marker base to establish light and shadow, followed by detailed colored pencil work to add depth, texture, and highlights on toned paper.
Hey guys, welcome back to my channel. So today is advent day number 18
and for this video I'm going to be talking through how I drew this red rose
in colour pencils and markers. So for this tutorial I'm going to be using the Pro
markers by Winsor & Newton and the colour pencils I'm using are the
Faber-Castell Polychromos and I'm going to be using a couple of
Caran d'Ache Luminance colour pencils as well.
But I'll write down all the colours I'm using and I'll put FC next to the Faber-
Castell ones and CD next to the Caran d'Ache ones
so you know which set they're from. So to start off with the tutorial I drew
out a sketch of the rose. So I'm not going to talk through how I
drew the sketch, it's going to be more about how I'm going to colour it
to make it look realistic. But when I have my sketch I want it to be quite
light so I took a bit of sticky tape and I pressed that against the whole of
the sketch and it really just lifts off the layer of the pencil and lightens it
but you can still see all of the pencil strokes underneath. And then I
just went and darkened it a bit more so that you could see on the camera
the sketch because you need to see it in order to really understand this tutorial.
So for this tutorial I'm going to be using three marker pens and I'm just
going to list them up the top here. So again I'm using the Winsor & Newton
Pro markers and I'm using the shades Poppy, Crimson and Burgundy.
So I've got a light tone, a mid-tone and a darker tone there.
And what I'm using these markers for is really to do a base layer
to indicate where the shadows are and where the highlights are in this
rose. So I'm not using them to get the detail, I'm just using them
to mark in where those shadows are and where the highlights are.
It's really important to pay close attention to your reference photo when
you're doing this so you can accurately put in where your
shadows are. It tends to be that the shadows on the rose are the parts
that are covered up or the parts where if you have a petal that's overlapping it
the petal that's being overlapped should have a shadow cast on it.
Also in the middle like the centre of the rose where
it's more enclosed it tends to be darker in that region as well.
So the process that I'm using to do this is I'm applying the lightest colour
first so that Poppy to the whole of the petal
and then I'm going in with the mid-tone which is the Crimson and I'm using that
to transition into the shadow and then I'm
using the Burgundy on the darkest parts of the shadow
so on the inner parts of the petal and as you can see it makes it look a lot
more three-dimensional.
So I continue to do that with each petal so I add the Poppy colour
and then I add the Crimson on the shadows and then I use the Burgundy
on the main darkest parts of that petal. As you can see there is a pattern to
where the shadows are so the shadows tend to be
on the inner parts of the petals and then the outer parts of the petals tend
to be more of the highlighted regions because that's where the light can hit.
So for this tutorial I am using the Strathmore Tone Tan paper
and the only problem with this is that when you're using markers the markers do
bleed through the paper quite a bit so if you're using this in
the sketchbook make sure you put something behind it
otherwise the markers will bleed onto the next few pages in your sketchbook
and you don't want to waste all your paper so put a layer of tracing paper
behind it or just another piece of paper or take
the sheet out of the sketchbook and draw on it separately.
So if you're new to roses then I definitely recommend that you use
reference photos when you're doing this and use a few different reference photos
of roses and look at where the shadows are
and you should be able to see a pattern and then use these reference photos
until you feel like you've got a good grasp on the concept of where the
shadows and the highlights are or it's not bad to use reference photos
so if you still want to use the reference photo
all it's going to do is make your work look more realistic because you're not
imagining the detail that's going to be there however it's always great to have
a good concept of where the shadows are anyway so you understand it rather than
just copying it. So I did do a video yesterday talking
about how I use markers under colour pencils so if you haven't seen that
definitely go and check it out and I did get a lot of comments asking
about how the lightfastness ratings apply to markers compared to
colour pencils so I'm just going to talk a little bit
about that right now. So for marker pens they aren't as
lightfast as some of the colour pencils are that I'm using
so they do tend to fade a lot more over time so markers in general aren't as
lightfast so I had people asking whether this meant
that when you use them in combination the markers underneath are going to fade
more and generally because the markers aren't
on display they're being covered by the colour pencils
then you won't see a lot of change over time
from your drawing because you've got that colour pencil covering it
so it depends if the colour pencil fades then it's going to look more faded
but if you've got large chunks of your markers that are showing through
like I tend to cover a lot of my marker up with the colour pencil
so there might just be the microscopic dot that isn't covered up so if that
fades then you're not even going to tell that it's faded but if you're using
leaving large portions of your drawings with just the marker and just
adding colour pencils to parts of it then you might see that the markers
fade a lot more than the colour pencils and it might look a bit weird
so you've got to bear in mind that so it's important to look up also
the lightfastness for your markers as well but like colour pencils there's
colour pencil brands where they're not lightfast like the Prismacolors
a lot of them have really bad lightfastness ratings
so just do a bit of research into the lightfastness for different
marker brands so you can pick the right one
generally I only use this technique for like fan art and stuff like that
stuff that I'm selling I don't really use markers for
I use more watercolour and colour pencils so I use the watercolours as an
underbase however if you did want to sell your
work with the markers then definitely look into
the lightfastness ratings and try and find the best one
for your budget. Okay so now I've moved on to using the colour pencil
and I'm using this in the same way that I use the markers
so I've got a lighter shade and a mid-tone and some darker shades and I've
also got a black from the Caran d'Ache and I've got the
crimson from the Caran d'Ache as well and I've also got a white for the
highlights so I'm using it in the same sort of way
so I'm using the darker colour for the shadows
and then I'm using the lighter one for the highlights and I'm also using the
white for the highlights as well and I'm just going to do this in layers
so I've started by indicating where all the highlights are on the
actual flower and then I'm going to be going in and
softening that out by adding lots of layers of the other colours as well over
the top of those markers. So I'm using the dark red and the
crimson for the shadows and I'm using that with
the black on the very very darkest parts of the flower
I'm trying not to use the black too much but only really on the darkest parts of
this flower and then I'm using the deep red for the
mid-tones so to transition from that dark red into where the lighter regions
are and the scarlet red and the white are
more where the highlighted regions are on the flower. So I mark where all the
highlights are over all the petals and then I start working on it petal at a
time. So when I use the black colour pencil I
always go over it with the crimson alexarum
from Caran d'Ache because it's a wax-based pencil
so to blend out that black you need to apply another wax-based pencil
over the top otherwise the Faber-Castell pencils
wouldn't have blended it out and it just looks black. So if you apply that
red Caran d'Ache coloured pencil it will really smooth it out
and lighten it so it's not such a harsh black colour.
And then I use the Faber-Castell and the Caran d'Ache to transition from
those shadows into those lighter tones. Again make sure that you pay close
attention to your reference photos especially for the veins of the flowers
so the little lines on each petal make sure that you look to see the direction
in which they are going in. So make sure you also look at your reference photo to
look at the direction that the veins are going in on each of the petals
because if you get the curvature of those lines right then it can make the
flower look a lot more three-dimensional. I also intend to use that scarlet red
colour to blend all the colours together so I do a final layer of this and the
deep red over the petals just to get the the
colours to soften and smooth into one another
and just to add a general tone across the flower.
So it's really important to apply the coloured pencil in layers to really build up
the depth into the drawing. So even if you think you've finished
certain parts of the drawing keep looking back
across the whole drawing to see if the certain bits of the shadows are dark
enough and then you might have to go in and just darken other bits
just to make sure the contrast in the flower is correct so the contrast
between the shadows and the lighter tones is good.
So once I've added the basic red colours across all of the petals I go in once
again with that white colour and I pick out the highlights in each
of the petals and I'm doing this using the direction
that the veins on the petals are going to help add three dimension to the
piece and then I'm going to go back in and
blend that out a bit more so it's not as harsh.
So then I just quickly went in with the Caran d'Ache blender that you get in the
set and I use that just to smooth over the
colours into each other to give it more of a smoother look.
So what I really like about the Faber-Castell Polychromos is that they
have such a sharp edge that you can easily get some really
crisp petals and also what's really nice about this
Strathmore Tone Tan paper is that because it's slightly toned I
can then go and outline the whole flower with this white pencil
and kind of add a background glow to it. It really stands out and brings it out
of the paper so this paper is really nice to draw
cartoons on and stuff like that which you really want to make pop out of the
paper. Anyway guys that's it for this tutorial
if you enjoyed it make sure to leave it a like
and also give it a share that would really help me out. If you're new to my
channel feel free to subscribe so that you don't miss out on my future speed
drawings and tutorial videos. As always I'll leave the links to my
social media sites in the description below. Thank you guys
so much for watching and I'll see you tomorrow.
