The Only 2 Chainsaw Brands Your Dealer Will Never Recommend (Poulan Isn't One)

The Tech Toolbox
1 follower
AI Generated·May contain errors
Video Summary
AI GeneratedThis video exposes how equipment dealers often prioritize high-margin, lower-quality brands over superior tools. It highlights Dolmar and Redmax as professional-grade, under-the-radar alternatives that offer exceptional engineering and longevity, providing better value for professionals and property owners than the more marketed industry giants.
You walked into that dealer two years ago, and you spent $800 on a chainsaw,
because the guy behind the counter told you it was the best thing on the wall.
He said it with confidence. He said the brand name like it meant something.
You took it home, you gassed it up, you sharpened the chain,
and by the second cord of wood it was already giving you grief.
Carburetor problems. Bar oil leaking where it should not.
A chain tensioner that stripped out before the leaves even finished falling.
You went back to the dealer, and he looked at you like you were the problem.
Like maybe you did not mix the fuel right. Like maybe you pushed it too hard.
And you walked out of there feeling like an idiot, when the truth is you were not an idiot at all.
You were just sold something that was designed to sit on a shelf and look like a tool,
not actually be one. The margins on certain brands are so fat,
that a dealer can practically pay his rent on a single weekend of chainsaw sales.
That is the part nobody tells you when you are standing there with your wallet out.
If this is the kind of thing nobody tells you at the equipment dealer,
subscribe to Split and Saw, because every single video on this channel
exists to give you the real answer before you spend a dollar you cannot get back.
Hit that subscribe button and turn on notifications so you never miss it.
There is a whole world of professional cutting equipment that never gets recommended at the
average dealer counter, not because it is inferior, but because the economics do not
favor the guy selling it to you. The two brands we are talking about today are living proof of that.
One of them carries a name you may have seen in passing,
but probably dismissed because nobody around you runs one.
The other one you have almost certainly never heard of at all unless you have spent serious
time around arborists or professional tree crews on the west coast.
Neither one is cheap in the sense of being poorly built.
Both of them will outwork and outlast what the big box store is pushing this season.
And neither one of them will ever get a prominent display at your local dealer,
because the margins are thin, and the sales reps do not show up with promotional incentives.
What they do have is real engineering, real professional track records, and real reasons
why the people who cut wood for a living choose them when they are spending their own money.
Let us start with Dolmar. If you are not familiar with the name, you are not alone in America,
but you would be very alone in Europe or Japan if you said you had never heard of it.
Dolmar was founded in Hamburg, Germany, in 1927 by Andreas Stihl. Yes, that Stihl.
The company that would later become the most recognized chainsaw brand on earth
started by building a saw under the Dolmar name, and the original Dolmar Model A from 1927
was the first production gasoline chainsaw ever manufactured in the world.
That is not a marketing claim. That is recorded industrial history.
Andreas Stihl went on to build his own company separately,
and Dolmar eventually changed hands over the decades, passing through German industrial
ownership before landing in the hands of Makita Corporation, the Japanese power tool manufacturer,
in 1991. That acquisition is the key to understanding what Dolmar actually is in 2024.
When Makita bought Dolmar, they did not gut the engineering and rebrand it.
They integrated it. The engineers who built Dolmar saws in the post-Makita era are the
same engineers who developed the Makita chainsaw line, and in many cases the platforms are identical.
The Dolmar PS5105C and its Makita equivalent share the same fundamental architecture,
same displacement at 50.1 cubic centimeters, same magnesium crankcase, same automatic chain
oiler system, same ignition timing. What differs is the color scheme, and in some cases minor
feature variations based on the target market. In Europe, Dolmar is sold through professional
forestry dealers and taken seriously by production cutters. In North America, it has historically
struggled for shelf space because Makita's tool distribution network prioritizes cordless and
electric tools, where the margin story is easier to tell. The PS5105C specifically is a saw that
deserves more attention than it gets. 50.1 cubic centimeters puts it in the class of saws that can
run a 16-inch bar all day and step up to an 18-inch bar for felling work without straining.
The power-to-weight ratio on this machine is genuinely strong. The saw weighs in at about 10.5
pounds without bar and chain, which is not ultralight, but it is not a boat anchor either.
For a saw in this displacement class, that weight means the engineers paid attention to where they
put material and where they could take it away. The automatic chain oiler on the PS5105C is
adjustable, which sounds like a small thing until you realize how many saws in this price range give
you a fixed oiler that either starves your bar on dry hardwood or floods your chain on softwood.
Adjustable oiling means you can tune it to the wood and the conditions, and that extends bar
and chain life significantly over a full cutting season. The anti-vibration system on this saw uses
rubber dampening mounts between the engine housing and the handle assembly, which is standard on
professional saws but often done cheaply on consumer equipment. Dolmer does it properly,
and if you are cutting more than two hours in a stretch, that difference accumulates in your hands
and shoulders in a very real way. The carburetor on the PS5105C is a Walbro, which is an American-made
component that professional mechanics know how to work on, and that parts are available for
without special ordering. That matters. One of the quiet ways cheap saws punish you is by being built
with proprietary carburetor designs that require either a dealer visit or a long wait for parts.
The Walbro system is field serviceable by any competent small engine mechanic,
and that translates directly to less downtime when something needs attention.
The air filtration on this saw uses a multi-stage system that keeps fine sawdust and debris out of
the combustion chamber more effectively than the single-stage filters you find on budget equipment.
Running a saw in dry hardwood conditions in mid-summer will tell you everything you need to
know about whether a filter system is serious or not. The PS5105C passes that test without drama.
Who actually buys this saw? Mostly people who already know what they are doing and are tired
of paying the stale or Husqvarna premium for features they will never use. Small logging
operations, firewood dealers who run 3 or 4 saws and need reliability without paying professional
forestry pricing, property owners with 10 or more wooded acres who cut their own firewood every year
and want a saw that will still be running correctly in its fifth season. The PS5105C
is not trying to be the most powerful saw in the class. It is trying to be the most consistently
capable saw at its price point, and it largely succeeds at that. Before we keep going, I want
to ask you something, and I want you to actually answer this in the comments below. Have you ever
spent real money on a log splitter or a chainsaw, taken it home, put it to work, and watched it fall
apart in the first season? Because if that happened to you, you are not alone, and you are not stupid
for trusting the brand on the label. Drop a comment right now and just say, I got burned.
That is it. Three words. Because every person who reads that comment is going to feel less alone,
and you are going to help somebody else avoid making the same mistake. I read every single
comment on this channel. Now let us talk about Redmax, and specifically the CS3800S,
because this is the brand that most American and Canadian property owners have never encountered,
and that professional arborists in certain regions treat like a quiet secret,
they are not entirely sure they want to share. Redmax is a name that originated in Japan
through a company called Komatsu Zenoa, which is the same Zenoa that built two-stroke engines for
professional outdoor power equipment for decades, and earned a serious reputation
among landscape and tree care professionals in the Pacific Northwest specifically,
where the tree work is demanding, and where equipment gets evaluated by how it performs
in 100-foot Douglas fir and red cedar, not by how it photographs at a trade show. Komatsu Zenoa
developed a line of outdoor power equipment under the Redmax brand that was designed around
professional landscape and arboriculture use cases, and for a period of time in the late 1990s and
early 2000s, Redmax handheld equipment was quietly becoming the preferred brand among landscaping
companies in California, Oregon, and Washington that were willing to pay for quality, but unwilling
to pay for a name badge. Then in 2008, Husqvarna acquired the brand. Here is where the story gets
important. When Husqvarna acquired Redmax, they did not dissolve it or turn it into a rebranded
budget line. They integrated the Zenoa engine technology into the Husqvarna engineering
ecosystem and continued selling Redmax equipment through a separate dealer channel, primarily
targeting landscape contractors, golf course maintenance crews, and commercial arborists who
had already built relationships with Redmax dealers and did not want to switch. The CS3800S
comes directly out of that heritage. It is a 37.7 cubic centimeter saw, which puts it at the smaller
end of the mid-range, but smaller displacement does not mean less capability when the engineering
is right. At 8.6 pounds without bar and chain, the CS3800S is a genuinely light saw, and an arborist
When you are working in a canopy, when you are doing aerial cutting or limbing at height,
every fraction of a pound you are not holding is energy you are saving for the actual work.
Professional arborists understand this in a way that ground-level firewood cutters sometimes do
not, and the CS3800S was designed with that reality in mind. The engine in the CS3800S
reflects Zenoa's approach to two-stroke design, which emphasizes clean combustion and strong
mid-range torque over peak horsepower numbers. The stratocharge technology that Zenoa developed,
and that carries through into current Redmax engineering, is a scavenging system that pushes
fresh air through the combustion chamber ahead of the fuel-air mixture during the scavenging cycle.
What that means in plain language is that less unburned fuel exits through the exhaust,
the engine burns cleaner, produces less smoke, and runs more efficiently on the fuel it consumes.
It also means reduced emissions, which matters in certain states where air quality regulations
affect what equipment you can legally operate commercially. California in particular has strict
small engine emission standards, and Redmax equipment has historically been compliant in
ways that some competitors have struggled with. That is not a minor point for a professional
operating commercially in a regulated market. The chain brake on the CS3800S is a side-entry
design that responds quickly, and that professional arborists specifically request because in canopy
work, the speed of the chain brake engagement can be the difference between a controlled stop
and a serious injury. Cheap saws have chain brakes that are technically present, but that are slow or
inconsistent under real working conditions. The Redmax system is tight, fast, and reliable in the
kind of cold, wet conditions that Pacific Northwest tree work happens in regularly. The bar and chain
system on this saw is compatible with standard Oregon and style Rollomatic format bars, which
means when your bar wears out, you are not hunting for a proprietary replacement. You walk into any
decent dealer and get a bar that fits. That is a detail that sounds small until you are in the
middle of a job with a worn bar, and the nearest Redmax dealer is two hours away. The throttle
response on the CS3800S is notably crisp, which experienced operators will tell you matters more
than peak power output for most of what they actually do. Limbing, pruning, processing, and the landing,
all of those tasks require short bursts of power and precise control over acceleration.
A saw that accelerates smoothly and consistently from idle is a saw you can work with precision,
and precision in cutting work reduces fatigue and improves quality. The anti-vibration system
on this saw is engineered for extended aerial use, which means it is arguably over-engineered
for ground-level work, and over-engineered is not a complaint in a tool you intend to run seriously.
Who actually buys the CS3800S? Commercial arborists in the western states and Canadian
provinces where tree work is dense and demanding. Landscape contractors who need a reliable
lightweight saw for cleanup and processing work. Property owners in areas like western Oregon,
British Columbia, and Washington state who have discovered the brand through professional contacts
and who want the commercial build quality without the full production logging price point.
The saw is also increasingly used by wildland firefighters and forestry crews who need a light,
reliable tool for hazard tree work, and that need to know with certainty that it will start and run
in difficult conditions without coaxing. It is a narrow audience in the sense that it is not a saw
the average suburban homeowner needs, but for the person it is built for, it is one of the most
capable options in its displacement class available in the North American market today,
and it costs significantly less than a Husqvarna or Stihl equivalent with comparable professional
specifications. The distribution reality for Red Max in North America is complicated. Because it
is sold through a dedicated commercial dealer network rather than through big box retail or
general hardware stores, a lot of potential buyers never encounter it. You do not walk past
it at the farm supply store. It is not hanging on the wall at the power equipment section of the
home improvement chain. You find it because a professional arborist mentioned it to you,
or because you were specifically looking for alternatives to the brand that let you down last
season, or because you found your way to a real commercial outdoor power equipment dealer who
carries it for the landscape contractors he services. That invisible distribution is exactly
why it stays off the radar for most buyers, and exactly why it keeps showing up in the hands of
professionals who have stopped buying for the label and started buying for the engineering.
One thing worth noting about both of these brands in the context of servicing and parts
availability is that neither one will leave you stranded in the way that a truly obscure brand
might. Dolmar parts and service travel well through the Makita dealer network, and because
the platforms are shared, a Makita-certified technician can work on a Dolmar saw with
complete confidence. Redmax parts travel through the Husqvarna commercial dealer network,
which is extensive in North America, and which stocks replacement components for current production
saws without the long lead times that plague imported brands with no established service
infrastructure. These are not garage brand saws where you are crossing your fingers every time
something needs attention. They are engineered products backed by real corporate infrastructure,
just sold through channels that prioritize professional users over casual retail buyers,
and that distinction is why the average person has never been offered one at a dealer counter.
The honest summary here is this. The Dolmar PS510-5C is a 50 cubic centimeter professional
grade saw built on Makita engineering with German design heritage, an adjustable Walbro carburetor,
a proper anti-vibration system, and a track record among firewood producers,
small logging operations, and serious property owners who cut their own wood every year and
need a saw that will still be working correctly five seasons from now. If you have been spending
style money and getting disappointing results, this saw is worth a serious look before your
next purchase. The Redmax CS3800S is a lightweight 37 cubic centimeter professional arborist saw built
on Zenoa engine technology, now operating within the Husqvarna engineering family,
with stratocharged combustion for cleaner burning, a fast, reliable chain break,
crisp throttle response, and a weight profile that makes extended aerial and precision cutting work
dramatically less exhausting. If you work in trees or you need a precision lightweight saw
for serious property management, this is a brand that deserves your attention before you default
to whatever is on the wall at the nearest dealer. Neither of these saws is for everyone. The right
tool depends on what you are cutting, how much of it you are cutting, and whether you are willing
to step outside the familiar names to get better value for your dollar. If what we covered today
made you think differently about what you have been buying and what you have been missing,
the next video on this channel is going to take you even further into the equipment decisions
that matter. Go watch it. You have already spent the time getting this far,
and what is waiting for you in that next one is worth every minute.
