Faceted Connector Earrings | Jewelry 101

Cozy Beads
9 followers
3 Video Views·Jun 27, 2026
Faceted Connector Earrings | Jewelry 101
AI Generated·May contain errors
Video Summary
AI GeneratedThis tutorial demonstrates how to create a pair of floral-style earrings using faceted beads and wire-wrapping techniques. The instructor guides the viewer through building a graduated dangle design, focusing on creating compact loops and consistent ear wires for a professional finish.
This is the pair of earrings. We are going to do that today. Really easy, really fun.
Let's talk about what we're using. The faceted beads, which are the focal point of the series.
Tool-wise, we have these mandrel or jump ring making tools in the show and I'm going to use
those. I'm going to use that to kind of round out my little shapes here. So then we've got 20 gauge
and 24 gauge for our wire. I've got that wire in the show. Tool-wise, trifecta, chain nose,
round nose, and flush cutter. And then the mandrel tools that I did not bring. Let's get started on
the demo. So the first thing that we're going to do is we're going to start from the bottom and
work our way up to the top and we're going to grab a little bit of 24 gauge. Just cut yourself
a couple inches of it. And my first little dangle down there at the bottom is five of these faceted
beads. So we're going to start with five and then we're just going to graduate up a little bit
as we go up the earring. And you can make the graduation more exaggerated if you want. I wanted
to keep them kind of small because that compact little, the compact little loops really give these
more of a floral feel than they have when they're, when you're doing a bigger loop and they kind of
spread out. So I wanted to keep them a little small. So if you like the look of these, just
copy exactly what I did. So then we're just going to pull this together in a loop. Make sure that
you've got one, the one, the middle one is sitting down in the bottom, facing up and down. Otherwise
it's going to, your little loop is going to be kind of crooked. And so then we're just going to
round this off and give this a little bit of a coil. So I've gotten a little bit of crooked here.
I'm just going to pull this, tighten my coil a little bit, and that should reshape it just a
touch for me. Wow. Did not. What in tarnation? That's what Olivia says. Tarnation. Okay.
Got a little floral shape down there at the bottom. Trim that tail off. And then we are going to make
another loop up here at the top with our round nose pliers. And we want our loop perpendicular
to our little flower shape. So we're going to push forward, make a loop,
and then we'll finish off our loop with another coil down towards our beads.
And I did kind of like a heavier coil. That way you could really see the gold versus,
like up against the silver. I wanted it to look like that was intentional, not like
I used the wrong color wire. So give yourself like a little heavier loop. And I'm using actually a
different gold wire, which is not as, it's like a different gold tone, so it's not quite as obvious
of a, like the contrast between the gold and silver is not quite as obvious with this wire. So
make sure you're using the wire that I put in the show for you because it's going to really give us
that contrast there. So then we're going to do three, I think that's what I did. Let me just
check. Yeah, three silver beads on our wire. Then we're going to drop our dangle on,
and then we're going to do three more. So we're going to have a total of six on the next one,
like this. And then again, we're going to bring these up into a loop and then coil that.
So the trick with these, because they're this faceted kind of funky shape, is getting your
loop kind of centered and your beads in a nice round shape. So one thing that I use to kind of
maintain that round shape while I was making this is that mandrel, like that, so that I can kind of,
it can be kind of, these beads can be kind of wobbly, so it kind of holds them in place while
I'm making my loop and just making sure that that little coil section is centered in my earring.
And it gives it, it keeps it like a nice round shape there.
And now we're going to do the exact same thing. We're going to make another loop
with our round nose pliers. Just finish that off with a nice chunky coil. And the nice heavier
coil helps to kind of stabilize those top beads up there, the beads closest to the coil. So they,
and that, if you stabilize those, you just kind of stabilize the rest of them. So giving yourself
that little extra, those little extra coils helps for a couple reasons. Make sure you tuck those
tails in. And then we're here. You can stop here or you can keep going. And we're going to keep
going. Another piece of 24 gauge wire. And then we've got four silver, our earring,
and then four more silver. So you got eight up there at the top.
So we're just again going to bring these together, crisscross that wire,
and then we will finish this earring off.
Trying to get, there we go. Got off center a little bit because I'm trying not to use my teeth.
My teeth are sometimes my greatest tool, which my brother-in-law who's a dentist would get so mad at
me. He had to shave my front teeth down because I chipped my front tooth making my sister's
wedding jewelry long, long time ago. But I chipped a little bit. I was trying to,
I don't know, close a jump ring or something, like frantically the day of the wedding.
And I chipped my tooth. And I thought, I ran, I had my studio set up in my parents' basement and
I ran upstairs to my mom and was like, oh my god, I think half my tooth is gone. And it was just this
teeny tiny little chip that no one could see. But you know how it feels way, way worse when you can't
see it. Anyways, I just finally got it shaved down about a month ago. So I don't have a chip in my
front tooth anymore. Okay. Now, see it just kind of starts to open up as we go up the earring. I
want to just round that out just a little bit more because these are, I just think these are
so cute. Little metallic flowers. I love them. And see, I would not go much bigger than this
section, this top one up here, just because it's, it's looking less and less compact,
like the bottom ones, because we're, the, the circle is opening up. So those, those beads don't
like push up next against each other like they do in the smaller loop. So I would just,
I don't know. It depends on the look you're going for, I guess. Okay. So now this loop,
we want parallel to our earring. So we're going to make our loop the other direction.
And then we finish that off with another big coil. And then we'll go back in and we'll just
make sure where our little flowers are spaced or shaped nicely.
Oh, it's so cute. Now we just need some 20 gauge wire for our ear wire.
And then we will set that aside. Okay. I've got my 20 gauge wire. That is not,
oh, my little trick I did. If instead, if I lose my little plastic cap, if I lose this,
or I break it because I break them all the time, I will just cut some little nicks in my
plastic here. And I'll do a couple all the way around, but then you can just
snag your wire in there like that. Like weed eater cord. Yes. And it just keeps it from
unspooling on you. We're going to make our ear wire. So we're going to use the smallest step
on our bail shaping plier, this little one right there. We're gonna make a little bitty loop
like so. Now we're going to flip it and we're going to flip our plier. I like to just butt my
loop right up inside there. Get it nice and tight in there. That's, that's one, because the hard
thing when you're making your own ear wires is like, how do I make them look exactly the same?
And this step right here, where we're, where you kind of place that loop and where you grab your
pliers can really change the, if you're not grabbing your wire at the exact same place
on both of them, you're going to have two totally different looking ear wires. So I just,
I push my loop up in that little valley there so that it's flush with my plier.
That way I know I'm grabbing my wire at the same point every single time. So all my ear wires are
going to look pretty much the same. And then we're going to come around that largest step
on the mandrel and just give it a little swoop like that. And then we're going to trim that off.
We want to make sure that we're going in with our reaming tool, which I did not bring,
that's got, it comes with a cut burr and you can soften the end of your wire there
so that it does not, or if you have a file or some sandpaper, just soften up the end of that
so it's not so sharp there. And then we are going to attach our earring to our ear wire. There we go.
Ta-da! Are those not the cutest little earrings? I don't, I may be alone in this,
but I think they're adorable. Hey guys, thanks for joining me today. I hope you enjoyed today's
demo. If you need any of the tools and supplies that we used today, check out the links in the
description below. And while you're down there, drop your favorite summer emoji in the comments
and don't forget to like, subscribe, and ring that bell so you don't miss any future videos.
Bye y'all!
