8 Incredible Record-Breaking Bridges

Hightech Road Bridge
22 followers
4 Video Views·Jun 26, 2026
All across the world people need to get from one place to another. And sometimes to get to that other place we need bridges . Here are eight bridges that are extraordinary in their own way, from standing the test of time to handling hundreds of millions of people crossing every year.
AI Generated·May contain errors
So, you want to get from point A to point B, but there's a bunch of water in the way.
What do you do?
Well, you could always just build a bridge.
Humans have been building bridges for thousands of years, and we've come up with a lot of
different designs for them, depending on what we're trying to cross.
Building a bridge across a low-lying lake is a little different than stringing one between
two mountaintops.
Someone has to design and build these bridges, and it can take a lot of clever engineering
to get from point A to point B.
Whether it's the cost, the extreme height, or the sheer distance that needs to be crossed,
here are eight bridges that people had to get pretty creative to build.
The highest bridge in the world, as in, the one with the longest drop to the ground below,
is the Sidu River Bridge in China.
It's a suspension bridge that connects two mountain peaks, and between them is an absolutely
stupefying drop of almost 500 meters.
Even though the bridge is pretty remote, it does save an awful lot of time compared to
having to climb two mountains and cross a canyon.
The location turned out to be a challenge.
The mountains are super steep and full of thick forests.
Plus, it's windy, so you can't even use helicopters.
So, they decided to build a bridge with rockets instead.
See, suspension bridges are usually built with towers for support.
They also have cables that run all the way across the bridge, connecting the ends to
the towers, and the towers to each other.
And once you've built the towers, you have to string the cables between them somehow.
Starting with the pilot lines.
But how do you hang a cable between two towers 500 meters up in the air?
The engineers turned to the army for help, and the army gave them some rockets.
They launched the rockets, carrying the pilot cables from one mountain to the other.
The rockets crossed the 1,100 meter gap and landed within 15 meters of their targets.
And the engineers had the beginnings of a bridge.
As incredibly drastic solutions go, that's not bad.
The Mio Viaduct in France is the tallest bridge in the world from the top to the bottom.
Its tallest mass checks in at 343 meters.
That's taller than the Eiffel Tower.
It crosses a deep gorge carved by the River Tarn.
And instead of hanging from the ends of the gorge as a suspension bridge, it was designed
as a cable-stayed bridge.
That's where the bridge has support pillars that go all the way down, with cables running
between the pillars and the deck of the bridge.
The architect, Norman Foster, tried to make the bridge actually look nice.
But it also had to cross a distance of 2,500 meters, and relieve the heavy traffic choking
the area.
The result is strangely delicate-looking.
It's held up by cables suspended from seven slender masts that look almost too graceful
to hold the thing up.
The design of the bridge was meant to minimize the amount of material they needed, and therefore
the cost.
But less material meant the bridge needed to be designed very carefully.
The columns are just about as narrow as they can possibly be while still being strong enough
to hold up the bridge, which weighs about 36,000 metric tons, by the way.
Meanwhile, each supporting column splits in two to handle any sliding around due to earthquakes
or temperature changes.
And it works.
The bridge across Louisiana's Lake Pontchartrain, adjacent to New Orleans, wasn't designed
with aesthetics in mind.
It's a trestle bridge, meaning that it has short spans with supports underneath.
Basically, it's a bunch of concrete pilings.
But it's also very, very long, nearly 38 kilometers.
In the mid-1950s, when it was opened, it was a pretty impressive engineering accomplishment.
It was precast, meaning it was manufactured in modular, basically identical pieces, which
for the time, was pretty unusual.
The bridge even had its own personal manufacturing plant.
Individual segments of the bridge were also prestressed.
Prestressed concrete contains stretched-out steel beams or cables, which make the concrete
more resistant to bending or buckling.
Stronger concrete means you can use less of it to cover more distance, which is pretty
convenient for building bridges.
The precast concrete parts were moved out over the lake, and all the construction workers
had to do was slot them together.
The parts were easy to fit together without spending too much time in the lake.
So all that concrete may have been kind of unglamorous, but it was useful.
Originally, the bridge was only two lanes across that entire distance, but it turned
out that a lot of people needed to cross Lake Pontchartrain.
So a second, nearly identical span opened in 1969.
It split up the north and southbound directions, so there was no longer any chance of head-on
collisions.
It also meant that people could finally pass each other.
Imagine being stuck behind someone going 10 kilometers below the speed limit for 38 kilometers.
Some bridges were built to last.
The oldest bridge in the world that people still use is the Karavan Bridge in Turkey.
It's not all that impressive, compared to some of the other bridges we've talked about
so far.
It's a stone slab about 13 meters long, supported by a single arch across the River
Meles.
But that simplicity is probably the reason it's been around so long.
The Karavan Bridge dates back to about 850 BCE, making it nearly 3,000 years old.
Arches are pretty cool.
They work by distributing the weight pressing down in the center out to the supports at
the ends, called abutments.
That can be really convenient when you're trying to build a bridge over a deep river
where you can't put down any supports.
The arch just sends all of the weight of the bridge to the sides.
But there is an upper limit to what arches made of stone can do.
The bigger the semicircle, the more tension it will experience.
And if it's too big, it'll collapse.
Arches made of other materials can be stronger, but 3,000 years ago, they didn't have too
many options.
And in the case of the Karavan Bridge, the stone arch made a perfect support.
You know, it didn't seem like it was going to be all that hard at first.
All they had to do was build a second bridge alongside the existing one to ease congestion.
Easy peasy.
But the Benicia Bridge in the Bay Area of California came in years late and more than
four times over budget.
They thought it would cost $300 million, and it ended up costing nearly $1.3 billion.
How can one bridge be so expensive?
Well, they forgot about the fish.
They were using pile drivers to dig underwater for the bridge's supports, and the noise
was killing fish.
The engineers had to invent a completely new technology to muffle the sound underwater.
Their solution?
A curtain of air bubbles that smothered the noise and saved the fish.
Air and water have very different densities, which makes it hard for sound to travel from
water to air to water again.
So they set up some perforated rings and pumped air through them, which surrounded the column
and blocked the noise.
Now, I know this is going to be an absolute shock to any of you who live in New Jersey
or New York City.
But the George Washington Bridge, which connects Fort Lee, New Jersey, with Manhattan, is the
busiest bridge in the world.
The bridge has a total of 14 lanes, a record for a suspension bridge.
Except, they're not all side-by-side.
The George Washington Bridge is a double-decker, with eight lanes above and six below.
It's had to be renovated and expanded multiple times to deal with this ridiculous demand.
The bridge opened in 1931 with six lanes and one deck, and was the longest bridge in the
world for a few years, until the Golden Gate opened in 1937.
In 1946, they added two more lanes.
Then, the lower level was added in 1962.
And this 85-year-old bridge sees more than 100 million vehicles every year.
That's pretty impressive for a bridge that's over 1,000 meters long.
All that traffic creates a lot of wear and tear.
The bridge isn't in any danger of collapsing from all the traffic, but it sure does take
maintenance.
The longest bridge in the world that you're allowed to drive a car on is the Bang Na Expressway
in Thailand.
It's not a water crossing, exactly, although some water does happen to go under it.
It's basically a freeway, built up in the air, because why go around stuff when you
can go over it?
And this bridge goes over a lot of stuff.
It soars through the air for 55 kilometers.
Like with the Lake Pontchartrain Causeway, engineers decided that precast and prestressed
was the way to go here.
The whole thing is six lanes, but widens to 12 at the toll plazas.
You didn't think you were going to cross this thing for free, did you?
Someone's gotta pay for those 1.8 million cubic meters of concrete.
But there is a bridge that's longer than the Bang Na.
It's just not for cars.
It's for trains.
Specifically, it's the Danyang-Kunshan Grand Bridge, which is part of China's high-speed
rail network.
And the world's second-longest bridge is on the very same line.
At three times the length of the Bang Na, the Grand Bridge stretches for 165 kilometers,
crossing numerous bodies of water.
Building such an enormous bridge was going to take a massive effort, so the builders
went with a brute force approach.
10,000 people built the whole thing in four years.
Like the other long bridges we've talked about, it uses prestressed concrete.
Which makes sense, because if you're going to build the longest bridge in the world,
you're probably going to want to use as little building material as possible.
So it takes a lot to build a bridge.
A lot of people.
A lot of money.
And often, a lot of concrete.
But with new building techniques and some creative thinking, record-breaking bridges
are being built all the time.
Thanks for watching this episode of SciShow, brought to you by our patrons on Patreon.
If you want to help support the show, just go to patreon.com slash scishow.
And don't forget to go to youtube.com slash scishow and subscribe!
