Stop Guessing Use This Exact Color Mixing Formula

Brush Mastery
8 followers
Jun 23, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video introduces the Aramix Separation Method, a systematic color-mixing technique designed to prevent muddy colors by decoupling value from chroma. By using a neutral gray anchor, artists can precisely control saturation without unintentionally altering the lightness of their paint, ensuring structural integrity in complex subjects like skin tones.
Look, if you're still struggling with mixing colors, you're not alone.
For today's lesson, you will learn how to mix colors by separating them into two parts,
which will save you from a lot of frustration, and honestly, it's probably the missing piece
in your workflow.
Once you know what it is, you can apply it to glazing or a la prima, and it will completely
rebuild your entire palette.
Okay, let's begin.
In the world of physics, mixing light creates white, but on your palette, every pigment
absorbs specific wavelengths of light and reflects only what remains.
This is subtractive mixing, but when you mix two colors that share no common wavelengths,
they absorb everything, leaving nothing to reflect.
For example, when you mix red and green, the red pigment kills the green light, the green
pigment kills the red light, and because they share no common wavelength in the spectrum,
the result is just a muddy gray.
Furthermore, in powder form, pigments reflect light from their surface.
Because of the particles of air contained in it, color as such appears grayer.
This is exactly why many beginners struggle with mixing colors.
We cannot reproduce the strength of natural light.
It's more likely to be translated through a series of gray.
For instance, if you make your white lighter, you have effectively modified it by darkening
every other tone on the canvas.
For red, if you want to weaken it, you can adjust its intensity by juxtaposing it with
surrounding colors and vice versa.
So prioritize colorful grays and carefully differentiate them into cool and warm, which
are especially important and useful to the artist.
So today, I want to show you a simple way to master this translation.
We call it the Aramix Separation Method.
In this demonstration, I am taking the skin tone of my hand as the target color, and the
paints I'm using are Ivory Black, Titanium White, Cadmium Red, Cadmium Yellow, and Phthalo
Blue.
There are three steps to achieve this.
Step 1.
Establishing the value.
I'm going to use Ivory Black and Titanium White to mix a neutral gray that matches the
lightness of my flesh tone.
Of course, you can squint your eyes to help isolate the value from the distracting hues.
But in this method, that gray isn't just a random mix.
This gray defines the light reflectance value.
It's basically how much light the paint reflects, on a scale from 0 to 100, where 0 is absolute
black, and 100 is pure white.
And because this is a neutral, slightly bluish tone, its secondary function is to cool down
your tone later.
Step 2.
Align the hue.
If you're not sure which way to go, you can loosely mix Cadmium Red and Yellow, or you
can simply look at the color wheel and ask yourself, is the target closer to red or to
yellow?
Now here is the key step, value alignment.
You must tint or darken this hue until it matches the same value as your gray.
You can use white to lighten it, or add deeper pigment to darken it until the lightness lines
up.
Step 3.
Mixing them to achieve the chroma.
I am using the gray to tone down the hue mixture until the color matches the target color.
You can do this without ever worrying about the value shifting.
Easy peasy.
But did you find the secret?
Because our pigments start at the same value, mixing them only shifts their saturation,
not their value.
And this method follows a simple weighted mixing idea.
If your colors start with the same reflectance, then no matter how much of each you throw
into the mix, the lightness stays the same.
You can even think of it like this, look at the white mixture, or the pure red on your
screen.
If their reflectance starts aligned, proportions won't change the actual lightness.
That's it.
It's that simple.
Okay, but the best part of this method isn't just about getting the color right.
Look at this plane.
Your eyes see two different colors, right?
Now desaturate the image and the illusion fades.
Their values are exactly identical.
This is why you perceive yellow on the forehead, red on the cheeks and purple on the jaw, yet
you still fail to capture the structure.
But honestly, it's not that complicated.
We can just simplify everything into a 5-value system to lock your tones.
Once you have that neutral grey base, you simply use our arm mix separation method to
distribute it into its respective hues.
Next, we're using Sargent's master portrait, Lady Agnew, as our reference.
So first, make a distinction between the light family and the shadow family.
And finding the terminator on your object is a good way to separate the light from shadow.
And we apply a blur filter to the reference to strip away deceptive details, simplifying
the complex portrait into pure value mass.
To help you easily identify value and hue, we will use a lightness calibration scale
to lock the value.
Think of this scale as your ruler.
So we start with the value 1, the light side, the part that receives direct light.
Now I'm placing the sampling hole on the front plane of the cheekbone, the largest
light mass on the head.
On our scale, this sits right at lightness 7.
Again, step 1, establish the value.
I'm going to start with ivory black and titanium white.
If this is way too dark, you need to lighten it.
And you would find adding white to it right now would really push it to a very cool temperature,
a grey coloration.
Now I'm adjusting it until it's a close match for that lightness 7 on your scale.
This is our anchor.
We should keep in mind that if you don't mix the values correctly, it's highly unlikely
you'll ever get the correct color.
Then separate the pile into two parts.
You can set the remainder aside on the edge of your palette.
Now for the hue, I'm picking up some cadmium red and cadmium yellow to find that local hue.
Step 2, align the target hue.
Once the hue is established, I'm going to add titanium white to lighten it, then keep
pushing it up until it matches our grey tone.
Step 3, mix them together to resolve the chroma.
I'm going to tone down the hue by mixing in our grey mixture.
Keep adjusting the ratio until the saturation of the mixed result matches that of the target
color.
When you are toning, because the value is a constant, you have total control over the
chroma.
If you find the mixture has lost its fire and turned too grey, you can safely push the
saturation back up by adding your hue mixture without ever worrying about losing your value
anchor.
Next, moving to the frontal plane of the forehead.
The skin here is close to the bone and typically thicker than in other areas, so it often appears
more yellowish.
I'm pushing the hue toward that yellowish tone.
Now, when mixing cadmium yellow and cadmium red, the result is a deep, saturated warm
orange with a red shade.
This serves as an excellent base hue for our flesh tone.
Finally, we mix them together, keep adjusting the ratio until the saturation of the mixed
result matches that of the target color.
And I want to highlight that the light and the dark values we choose are not from very
dark to very light.
This way, when painting, the possibility remains to strengthen in both directions, toward the
light and the dark.
Next, we continue identifying the large color masses across the picture.
Compare the skin.
The most dominant presence is the dress, here I'm picking up phthalo blue.
Once the hue is captured, we begin to lighten it up by adding titanium white, gradually
adjusting it until we reach a comparable lightness.
Now I'm bringing them together using a gray mixture to tone down the blue, and I'm adding
a little bit of cadmium red to adjust it.
And remember the highlight, it only exists as a sharp spark on the skin tone.
We don't assign it a specific value, instead we treat it as the final touch, sitting upon
the light mass.
Next one, we are going into the middle tone.
When the surface shifts away from the light, it creates those gradient areas that we call
middle tones.
There are two types of middle tone that are very useful, the light half tone and the dark
half tone.
So I'm going to start out with value 2, the light half tone, always next to the light
side.
We'll sample the transition on the front plane of the cheek.
On our scale, we've stepped down from an 8.
You would find this is close to lightness 5.
In most cases, this is simply a darker version of your previous tone.
Repeat the step, mix your neutral grey first, then move to match your hue.
I kept gradually adding a bit more of these colours, comparing the mixture until it matched
a value comparable to your grey.
After that, mix them together, and the light half tone on the cheek is much more colourful,
chromatic and warm than the one further towards the light mass, because in the cheeks, the
chin and the eyelids, the skin is rich with blood vessels.
These areas are prone to visible redness and capillary dilation, so we'll lean into a warmer
pinker saturation here to mimic that biological realism.
As you mix them together, you should decrease the proportion of the grey mixture and push
into a higher chroma.
This specific tone acts as a bridge between the tones.
You must ensure it uses a different grey-to-colour ratio from value 1.
Avoid a simple average of the two.
This deliberate shift in proportions is what prevents the skin from looking muddy.
Next, we shift our focus to the side planes of the forehead and the temple region.
Notice the hue shifting compared to the cheek.
To capture this transition, I'm going to add some cadmium yellow to pull the hue mixture
back toward that yellowish tone.
As you watch it mix with our anchor grey, you'll see it react with the yellow, creating
a subtle greenish tone.
Now, when mixing these tones, I want you to consider an incredibly useful colour theory
concept.
Primary colours, because the ivory black of course, can actually act like a blue.
For instance, if I add a grey to my red, I can neutralise its intensity, pulling it closer
to a purplish tone, or if I add that same grey to yellow, it will push the hue further
toward the green side.
As I mentioned earlier, the colourful greys are really what build the structure of your
painting, and all of this comes down to the precision of value.
Every colour spot is carefully calculated for its value and its necessity to the whole,
bringing the picture into balance.
The most exquisite effects are found in the subtle shifts between warm and cold, like
the warmer red of a cheek against the cooler, intense red of the lips.
Next, we establish value 3, the dark halftone.
It sits right at the edge of every shadow.
This is where the form is away from the light.
To anchor this value, I almost always look toward the brow bone.
On our scale, it's close to the lightness 3.
After mixing the grey mixture, I also split it off, leaving a small reservoir in the mixing
area, then using cadmium red and yellow, I mix the hue.
Cadmium red is a dark value, so we don't need to add white to get there, since the reddish
tone in the socket pushes your proportions toward the chromatic side.
I'll keep shifting the balance, fine-tuning the ratio, and adjusting it gradually until
I capture the exact colour I need.
Next, moving to the orbicularis oris region, notice how the tones around here lean more
toward yellow.
To capture this, I'm adding more cadmium yellow to the hue mixture, and adjusting it until
it matches our target value.
After that, I'll use the grey mixture to tone it down slightly.
And always keep comparing this with your previous mixture, so you can clearly differentiate
the two.
Next is the value 4, the shadow mass.
This value represents the darker areas in the shadow family.
There are two kinds of shadow, the form shadow and the cast shadow.
A form shadow appears when planes turn away from the light, and its shape is determined
by the arrangement of planes in that area.
So here I find a form shadow from the side plane on the right side of the nose.
I'm going to deliberately choose an initial value that is slightly lighter than it ultimately
appears, so I'm locking this at lightness 2.
After mixing the grey, I split off that grey mixture again, placed it on my palette and
kept some of it.
Then I mixed the hue mixture to darken it.
You can use phthalo blue if you want to keep more rich warmth.
You could use alizarin crimson, but it doesn't matter which pigment you use as long as its
value matches the grey.
I can tell you that when painting portraits, you will always find both warm and cool colors
in everyone's shadows.
Next, a cast shadow happens when one object blocks light from reaching another.
For example, the head casts a shadow onto the neck.
Notice the instant temperature shift, it's more orangey.
I'll keep shifting the proportions, adjusting the tone slightly and constantly comparing
it to the previous one.
Next, we introduce the lip color.
I've decided to categorize this early, because Lady Agnew's lips have a very specific hue.
Of course, you don't have to pre-mix the color.
As long as you know where it sits in the value range, the structure stays intact.
Finally, the value 5, the dark accents.
This refers to the deepest shadows, including both the core shadow and occlusion shadows.
I find the occlusion shadows below the nose and the eye cover fold, where we lock it right
at lightness 1.
An occlusion shadow is the darkest kind of shadow, and it stays in the deepest crevices,
where almost no light penetrates.
For the hue mixture, to maintain chromaticity, we do not use titanium white, because titanium
white would take away from the color, and because the skin is somewhat transparent,
light striking, it does not simply reflect off the surface.
Instead, some light penetrates through the epidermis and into the dermis, where it scatters,
a phenomenon known as subsurface scattering.
For example, like the nostrils or the shadow behind the ear, we keep the red and earth
tones incredibly pure and dark.
Next is the core shadow, the darkest area on a three-dimensional object, where light
is least able to reach it, typically found along edges or where surfaces meet, and it
has less chromatic color than the occlusion shadow.
So when painting, you already know which colors go where.
It's all about putting them in the right places and blending them.
If you're working with acrylics, you don't necessarily need to pre-mix every tone, since
they dry incredibly fast.
However, just applying the concept of separating the colors during your mixing process will
make your workflow incredibly smooth.
Alright, thanks for watching.
Don't forget to like, subscribe, and drop a comment below, like what's your biggest color
mixing struggle.
Love you guys, and I'll see you soon.
