How To Build A Hinged MULTI-USE Garden Bed Cover!

Garden Bliss
2 followers
2 Video Views·Jun 22, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a step-by-step guide on building a multifunctional garden bed cover. Designed to protect plants from pests and allow chickens to clear garden beds, the cover features a portable frame with hinged doors for easy access and a sturdy design that can also support plastic sheeting during freezes.
Comments are disabled for this video.
Today I'm going to show you how we built this garden bed cover. I wanted this garden bed cover
to be functional and do more than just cover my strawberries from birds and squirrels. We also
built this with our chickens in mind so anytime I need a garden bed cleared or worked I'm able to
put this on top of any garden bed in my garden and throw a few chickens in to do their magic.
I also wanted easy accessibility on both sides to maintain the garden bed without having to remove
the cover or have any doors in the way. I will also add this actually made a really great frame
to add some plastic over when a freeze came through the other day. So without further ado
let's go ahead and jump into this build. To start this build you want to measure out the length
inside of your garden bed. Our garden beds were actually shorter than advertised. We really didn't
realize this until we measured it this day but they were supposed to be an 8 by 4 and when we
measured our length was 7.9. So we cut two of our 2 by 2 by 8's to our 7.9 length. After cutting
these two 2 by 2's we set them inside the garden bed to make sure that they would fit smoothly
before moving on. Once you know that the pieces fit as desired measure the distance between the
two boards to find your width length. Cut two more pieces to your width length. Ours was 41.5
inches. Once cut set these two pieces inside the garden bed alongside with your length pieces to
make sure everything fits correctly before assembling. If all lengths fit correctly cut
six more 2 by 2's to your length measurement and two more 2 by 2's to your width measurement.
Along with those cut eight of your 2 by 2's to your desired height. We made ours two feet tall.
I wanted to make sure that our strawberries have plenty of room and it also is tall enough to put
a few chickens in when I'm having a garden bed cleaned up and worse. So just make sure that the
height will work for your plants that you are trying to cover. You can pretty much make this
to any height you desire. Now we are going to start assembling. Assemble everything into a rectangle
and pre-drill your holes to prevent any wood splitting. We used four inch deck screws for
this project. We also used this can do it clamp and it helped a lot with this whole process.
Before connecting the sides together we're going to add our hardware cloth to all the sides. This
is easily done with a stapler but I will say having a decent stapler will make all the difference
when you're going through any type of stapling step. So just buy a good stapler in the first
place. Once your hardware cloth is attached start assembling all sides into a box. Once again make
sure to pre-drill your holes to prevent any type of splitting. Once you have the main portion of
your garden bed cover built take it over to the garden bed and make sure everything fits correctly.
If everything does get your tape measure out and measure out the length between the top. This piece
will be sitting inside our box. We will actually be using a 2x4 for this step because we want this
to be able to support our hinged cover on top. We want to measure the length that is sitting in
between our garden bed length so it's going to be slightly different than your other length pieces.
You'll want to find your middle length between your width here just so you can make sure it's
sitting in the middle of the top there because again this is going to be supporting our hinged
cover and we needed this to be in the middle so it will help support our doors. Alright so we will
have two more rectangles that we need to build for the door. So when measuring keep in mind where the
2x2s will be placed on the top and measure the width between those two pieces. It's just going
to be that middle portion. I will say we did have to kind of play around with this just a little bit
to make everything fit perfectly. We thought we had it measured right initially and it was just
one of those things that once we got it put together we needed just to slice just a little
bit more off so it's one of those things where you might have to play with this one just a little
bit to make sure everything fits exactly. You will already have your length pieces cut for this so we
only need to cut our width pieces for this. We will cut four more pieces to the length that we need
to make the doors the same way we did for all the sides. So before adding our hardware cloth we are
actually going to add our hinges first. So we have five hinges here and we just evenly measured these
out along the top. This will attach our doors together in the middle allowing us access to
both sides of the box easily. Then we just took this back to our garage and we added our hardware
cloth just like we did for all of the other sides and where the door is hinged together we took a
pair of pliers to cut the hardware cloth so it could bend easily and we turned up any extra
hardware cloth around as needed and stapled everything down. So then we're going to place
this on top of the box and add our handles. So we chose these nice big handles because it makes it
really easy to move around with these. We added a handle to the middle of each side. We did have to
wait a few days for our latches though. We wanted to put four latches around the top to make sure
the top would be secured down also allowing everything to move really easily. So we found
these latches off of Amazon and I will attach them in the description box below for you guys
because we found it kind of difficult to find exactly what we wanted and we ordered another
one that was just too large but these ones worked really perfectly with the two by twos and there
you have it. Once those were assembled we locked everything in place and this has worked so
perfectly for the last few weeks. This has just been amazing. Everything's really easily accessible.
I've been able to throw a few chickens in. They had so much fun in some of my empty garden beds
testing everything out. It was very easy to move around and again it was really easy to put plastic
all around it as well when a cold snap came through. Either way guys I hope you enjoyed
this build. If you did make sure to give this video a thumbs up before heading out
and thanks for watching today. I'll see you all in the next one.
