How Does a Fan Really Work The Invisible Rotating Field Inside

Inventions and Inventors
25 followers
10 Video Views·Jun 21, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive technical breakdown of how an electric fan operates, focusing on the mechanical oscillation system and the physics of the single-phase induction motor that powers both the blades and the head movement.
Today we're diving into the fascinating world of electric fans.
Ever wondered what really goes on behind those spinning blades?
Let's find out by taking a closer look.
Starting with disassembling the upper safety covers.
Now we can clearly see the inner workings of this fan.
Let's explore how it all comes together.
This fan has two primary movements.
First, the fan blade rotates, blowing air towards us.
Secondly, the entire head section oscillates left and right,
spreading the airflow across the room.
Both of these movements are powered by a single alternating current single-phase induction motor.
It's one of the marvels of engineering.
Later in this video, I'll explain how a single-phase induction motor works, so stay tuned.
Let's start by studying how the oscillating mechanism works.
When the fan is turned on, the motor drives the fan blades to rotate,
while the oscillation mechanism causes the fan head to move side to side.
Inside the oscillation mechanism, there are several gears and levers working in harmony.
One key component is the worm gear,
a shaft with a spiral thread that engages with and drives a toothed wheel.
When the fan is turned on, the motor powers the fan blades to rotate,
and as the shaft rotates, it drives the worm gear, causing the connected gear to turn as well.
Next, we have a special axle shaft with a gear wheel on one end
and a locking mechanism on the other.
This axle fits into the worm gear wheel.
Here's the cool part.
In its default position, the axle stays still and doesn't rotate.
But when we push it down, metal balls lock into place with the worm gear wheel,
causing the axle to rotate along with the worm gear.
This axle drives another gear wheel,
which begins to rotate when the locking mechanism engages.
The final gear in this sequence is connected to a rigid bar.
The other end of this bar, along with the motor body, is pivoted to the fan stand.
These are the basic components that make up the fan's oscillation mechanism.
Working together to ensure the fan moves side to side,
distributing airflow evenly throughout the room,
this setup is known as a four-bar mechanism,
which allows the fan head to achieve its smooth oscillation movement.
This oscillation movement is driven by the motor.
More accurately, single-phase induction motor.
First, let's disassemble the motor to get a closer look.
The motor has two main parts, stator and rotor.
The stator is the stationary part of the motor,
made up of copper windings surrounded by metal sheet laminations.
When powered, these copper windings generate a rotating magnetic field,
which is essential for the motor's operation.
In just a minute, I'll explain how this rotating magnetic field is created
and how it powers the motor, and ultimately, the fan.
The rotor is the rotating part of the motor.
It consists of windings made up of conductors,
typically copper or aluminum bars,
embedded in semi-closed slots within a laminated rotor core.
This design is known as a squirrel cage rotor.
The name originates from the days when squirrels were kept in cages,
similar to the wheels we now use for hamsters.
Considering this, maybe it's time to update the rotor's name
to a hamster wheel rotor instead.
What do you think?
But here's the intriguing part.
The rotor doesn't have any direct electrical connections to the power supply.
So how does it actually rotate?
Let's dive into that.
Let's simplify things by using a single copper wire loop
to represent the rotor winding.
We know the rotor is surrounded by stator windings like this.
As I mentioned earlier, the stator windings create a rotating magnetic field.
I haven't explained exactly how this rotating magnetic field is generated just yet.
But don't worry, we'll get there.
For now, let's assume we have a rotating magnet surrounding our rotor.
As the rotor is surrounded by a changing magnetic field,
something fascinating happens.
Whenever there is relative motion between a conductor and a magnetic field,
it induces a voltage across the conductor.
Since the rotor is a closed loop,
the induced voltage causes a current to flow around it.
To determine the direction of this induced current,
we can use Fleming's right-hand rule.
Here's how it works.
Point your thumb in the direction of the conductor's motion
relative to the magnetic field.
Point your index finger in the direction of the magnetic field,
which always goes from north to south.
Your middle finger will then point in the direction of the induced current.
Even if the conductor itself is stationary,
and the magnetic field is moving,
we can still apply this rule.
Just imagine the conductor moving in the opposite direction
relative to the magnetic field.
But here's something interesting.
As the rotor spins, the direction of the current changes every half circle.
This means that the current flowing through the wire loop
is actually alternating current.
Now that we know the rotating magnetic field
induces a current in the conductor,
let's explore another key concept.
According to the basics of electromagnetism,
when a current flows through a wire,
it generates a circular magnetic field around it.
Since there's alternating current,
AC, flowing through this wire loop,
an alternating magnetic field forms around it in a similar pattern.
It's as if there's a small magnet attached to the wire loop,
continuously flipping its poles as the current alternates.
Now, we have two magnetic fields at play.
One created by the stator's rotating magnetic field,
and the other generated by the current flowing through the rotor's wire loop.
These magnetic fields interact with each other.
The outer magnetic field from the stator
rotates around the inner magnetic field generated by the rotor.
Because opposite poles of magnets naturally attract,
the inner magnetic field created by the rotor
tries to align with the rotating outer field.
This causes the rotor to spin
as it continuously attempts to keep up with the stator's magnetic field.
It might seem a bit confusing at first,
but if you watch closely, it becomes clearer.
The rotating magnetic field from the stator
induces a current in the rotor's wire loop,
and this current generates its own magnetic field.
The interaction between these two magnetic fields,
the stators and the rotors,
results in the rotor spinning,
which is how the motor drives the fan.
Now we know that a rotating magnetic field makes the rotor spin.
But how can we create this rotating magnetic field
in a stator that stays stationary?
It's a bit of a process,
but let's break it down step by step.
The key lies in alternating current.
AC changes the direction of the current periodically.
When current flows through a wire coil,
it generates a magnetic field.
That's basic electromagnetism.
As the current direction changes,
the magnetic field also flips direction.
So if we power an electromagnet with an AC source,
the poles of the electromagnet will continuously alternate.
However, if we connect two electromagnets in series
and power them with AC,
their poles will alternate,
but this alone doesn't create a rotating magnetic field.
Instead, it just causes the magnetic poles
to switch back and forth without any rotational motion.
Let's try a small experiment,
starting with the same setup we discussed earlier.
We'll begin by naming the first branch of electromagnets Branch A.
If we measure the current through Branch A,
we'll see it changes continuously like this.
Next, let's add another set of two series-connected electromagnets,
wired in parallel with Branch A.
We'll call this Branch B.
If we measure the current in Branch B,
it also changes continuously.
When we compare the two emitters,
we'll see that the current in both branches changes simultaneously,
meaning the currents are in the same phase.
Now, we're going to connect a capacitor to Branch B.
A capacitor is a component that has the ability,
or capacity, to store energy in the form of an electrical charge,
creating a potential difference across its plates,
much like a small rechargeable battery.
Capacitors have the unique ability
to alter the behavior of the current flowing through a circuit.
Let's see what happens when we connect a capacitor in series with Branch B.
When we observe the emitters,
we'll notice that the currents in the two branches
no longer change simultaneously.
This is known as a phase shift,
where the capacitor leads the current.
This phase shift occurs due to capacitive reactance,
which is the capacitor's resistance to changes in voltage.
To learn more about capacitive reactance,
check out our video on resistance and reactance.
I'll attach the link in the description.
Now that we have everything we need,
can you imagine how to create a rotating magnetic field using this setup?
Let's rearrange the electromagnets.
Can you see how the magnetic field now rotates?
Now that it's clear, I hope you've got the idea.
If we place the rotor in the middle of this rotating magnetic field,
it will start to spin,
driven by the continuous motion of the magnetic field around it.
In this setup, the rotation is created by four windings.
To make the rotation smoother,
we use eight windings in the motor.
Four of these windings are directly connected to the power supply,
while the other four are connected through a capacitor.
In each branch, the windings are connected in a special way.
Imagine that the current flows continuously in one direction in both branches.
In each branch, the current circles clockwise in two windings
and counterclockwise in the other two.
This setup creates two north poles and two south poles in each branch.
However, since we're using alternating current,
the current not only changes its direction, but also its magnitude.
Additionally, due to the capacitor, there's a phase shift between the branches.
As a result, the magnetic polarities in each branch shift like this.
This may seem random, but when we align them like this,
we can clearly see that the magnetic poles move in one direction.
Now, if we place these windings around the rotor like this,
we create the necessary rotating magnetic field.
However, because the stator windings generate similar magnetic poles in opposite directions,
the rotor requires more than one loop to achieve continuous and smooth rotation.
This design ensures that the rotor always has a part of its structure
aligned with the rotating magnetic field, allowing it to rotate smoothly.
This is why the rotor is shaped like a squirrel cage.
The multiple bars in the rotor ensure that there's always a portion of it
positioned to interact with the stator's magnetic field, regardless of its orientation.
This design guarantees smooth and continuous rotation,
allowing the motor to function efficiently.
Most fan motors use CBB61 metallized polypropylene film capacitors
to create the necessary phase shift.
And that's the essence of a single-phase induction motor.
I hope this explanation has cleared things up for you.
Now you have a complete understanding of how a fan works.
That's all for today.
If you think my contents are valuable to the world, you are welcome to join my Patreon community.
Like and subscribe to Professor Madd for more interesting videos.
