McLaren W1 Inside Story On 1275hp P1 Successor 4K

Family Auto
135 followers
#automobile #autos #cars #4wheels #luxurycar #sportcar #highspeedcar #testdrive #toyota #tesla #porsche #hyundai #rollsroyce #royall #suvs
AI Generated·May contain errors
First there was the McLaren F1, the GOAT, the OG hypercar.
Then came the legend that is the P1, arguably the most exciting of the Holy Trinity.
And now, now we have the W1. What's the story here then?
Yes, it's the successor to the F1 and P1. The basics are as follows.
399 will be built, each 2 million including taxes, but minus whatever personalisation you
get MSO to do. It's a 1,258 horsepower hybrid that's faster round a track than a Senna,
faster in a straight line than the Speedtail, has almost exactly twice the horsepower of the F1,
and like the P1, has a race mode that drops the ride height and extends the rear wing.
And handily, it's turned up at almost exactly the same time as the Ferrari F80.
Reckon there's been some phone calls between Maranello and Woking based on the fact that
McLaren's CEO used to work there? Maybe. Anyway, it is a very complicated car,
so we are going to go through it section by section, starting with...
Yeah, how it looks. Because it's not beautiful, is it? The P1 was all sinuous curves and starts.
This is a bit more disjointed. It's like it's been designed in sections. The design doesn't
particularly shout McLaren to me either, and nor does it shout 2 million quids worth.
But it's hardly like Ferrari's new F80 is a looker either. Yet last time round,
both the LaFerrari and P1 were gorgeous. You could blame Aero, but the Valkyrie is
a sensational looking thing, albeit more radical and compromised than either of these.
So here's the thing. You need to see it in person. Because when I first saw pictures of it,
I just thought, well, the surfaces looked flat. But now you're starting to get a sense of the
shape. This is a much softer curve than I thought. It's more akin to the P1. And I don't get these
McLaren headlight shapes yet, but I suspect it will come when they do future models. This is
W1 is probably going to lead for other cars to follow. I like the little portholes here where
you can see the inboard pushrods in there. And then you get to the proper head scratchy bit,
because look at all of this stuff going on through here. Obviously, air is meant to come into here
and then get channeled in various ways. There's a weird aero profile bit, which is obviously
designed to channel the air down and back past these really quite voluptuous sides. It's much
more shapely when you stand up close than you think it is from further away. But the complexity
of what's going on down the side of this car before you get to this bit. Now, McLaren say this
is based on this year's Formula One car shape. To me, that is the bit that says Senna more than
anything else. And in pictures, I had never even noticed this separate. It's like UFO hovering
over the roof. Doubtless it does some very clever stuff with the air channeling it down over this
quite big slab of back deck like the Ferrari. There is no rear visibility and just sort of a
bit of a glimpse down into the engine. What do we think of the name, though? W1 stands for winning,
and I suppose Lando is at the moment, so that's all right. But it's not the most emotive. It
doesn't resonate like P1 and F1 did. But then you look through the alphabet and you think,
oh, actually, they must have really struggled because M1 is a BMW name, S1 is Audi, A1 is an
Audi and also a piece of paper. R1 is Yamaha. They didn't really have many options open to them.
In case you're wondering, McLaren also trademarked U1 and H1. Maybe we'll see
one of them appear in another decade. In the meantime, let's discuss the
Hidden underneath the carbon body panels is a brand new monocoque called the aerocell.
Essentially, this is the core of all the W1's aerodynamics. By raising the occupant's legs 80
millimetres, McLaren can use the underbody to do more with the airflow. It also incorporates a
fixed seat, the lightest solution possible, and with no seat runners, that means the aerocell
is more compact, shortening the wheelbase. It's only a fraction longer than the P1's.
Is the W1 really that much of a step forward? The old P1 could do six miles of electric-only
driving, the W1 just 1.6 miles, and it still uses a four-litre twin-turbo V8 and twin-clutch
gearbox. It doesn't really seem to be moving the game on. But wait, the V8 is brand new from the
ground up, as is the gearbox which now has eight speeds rather than seven, and no reverse. That's
done by the electric motor, which itself delivers 342 horsepower, while the V8 contributes another
915, bringing the total to 1,258, 75 horsepower more than the Ferrari. And yet the Ferrari is
faster. It claims 2.15 seconds to 62 against 2.7 for the W1. That's because the Ferrari is
four-wheel drive, fast off the line, while the McLaren is rear-wheel drive, lighter. It's 125kg
less than the F80, which means once up and running, it's just as fast. It might be slower to 62, but
by 125, it is level pegging. Both hit that in 5.8 seconds. Ferrari makes no claims above that,
but the McLaren goes on to hit 186mph in under 12.7 seconds. It revs to 9,200, the highest-revving
McLaren ever, and has a dry weight of 1,399kg. With fluids, that'll be around 1,530kg and still
gives the W1 an 822bhp per tonne power-to-weight ratio. You will need a Jesko attack to go much
faster. It is a hybrid, but it's for power, not range. The 1.4kWh battery is a small tube
tucked into the bottom of the chassis, recharged only via spare engine power. The motor sits not
on the main driveshaft, but drives through the shaft on the even gears of the gearbox.
It's compact, light, and has nothing in common with the Artura. The entire system – battery,
motor and all ancillaries – weighs 100kg, yet as we said earlier, it develops over 340hp.
Right, you get the picture. It's a complicated car, so let's get someone in for a deep dive.
This is Deputy Chief Technology Officer Chris Harrison.
We've inclined the engine two degrees, which allows us to start the diffuser pretty much in
line with where we're standing now, and that allows us to accelerate the air underneath the
car so that the air actually leaves at the rear of the car twice the speed of when it enters
at the front. So it enters there at 100mph and exits at 200mph? Twice the velocity.
Really? And that's just from using it because you've got a very effective diffuser that
pulls the air through? Absolutely. And then as we build out from that, you can see that
the functional forms around the car are fundamentally there to allow us to maximise
and extract the most from the ground effect. We need to manage the air for multiple reasons
down the side of the car. One of them, as you said, is fundamentally for the ground effect,
is to provide the sealing down the underside of the car, where we have to evacuate the air
from that high-pressure wheel well. And we effectively create two vortices, one down each
side of the car, that allow us to seal the underbody. So I didn't realise this is what
vortices does. So you actually want those little spirals of air running down the side because that
creates a boundary layer for the air to stay inside of? Absolutely, yeah. So you use those,
instead of having little barge boards underneath the car to aim it, you engineer these vortices
to glue the air into place? Absolutely, yeah. And then further forward, there's a little aero flap
there. Why have you got an aero flap there? Because obviously you're evacuating hot air from there,
but you've also got a flap built into it. Yeah, as we said, it's also helping us managing air
up and over the car. But then also this hatch is where we have service access, and this is where
you'd access the AC charger for charging and discharging. Oh really? So you can keep it,
I suppose on trickle, you want it on trickle charge? Yeah. And that's also the charge port
for the battery, isn't it? Yes, yeah. Tiny little battery. You're not adding much weight,
is it? 1.4 kilowatt hours? Yeah, exactly that. So again, we optimise everything for weight,
so it gives us the performance that we need. So did you look at using super capacitors or
anything instead of just a small battery pack? No, we were very clear about working forward on our
hybrid lineage. So building on technology we've already deployed from the P1 and the Speedtail,
and this is a huge step change on. For instance, it's 40% lighter than the hybrid system that we
had in the P1. Yeah, and that battery pack said that all you've got to do is get charged back
into it very fast and out of it very fast because you're driving a 340 watt horsepower electric
motor from a tiny little battery pack. Yes. So you're sort of blowing all the power out in one
good acceleration run and then you need to use the engine to recharge it, I guess, because you
haven't got regen braking, have you? Yes, so we do all the regeneration via the overspeed on the
motor. Right, I've opened the door up because I wanted to show you just how cutaway it is around
that aerosol tub and also if you start looking down there too close you'll realise this is a
show car. It's not a finished car. This car doesn't go on sale for another 18 months or so
at least. But look, we've got the suspension components here. This is the lower wishbone,
and Chris has got me up right there, very clearly 3D printed. You're not machining these, are you?
No, absolutely, and you can see fully the beautiful forms that we're able to take
and the opportunities that we can exploit by using 3D printing is we can create a homogenous form
that enables us to incorporate not just the loads that these components need to see but also
the aerodynamic form as well. This element up here, in none of the pictures had I noticed this
sort of little batwing job on top. I'm assuming it's gluing the air to the back deck. Yes, so
we call this the flow diverter and effectively its role is, as you say, it ensures that we get
the air glued to the back of the car to allow the active long tail to function. So we need
to feed the active long tail with clean air. This also helps channel air if you can imagine
the car is sideways and we've got air entering, acting sideways. This allows us then to
channel the air down further onto the spoiler. Right, and why is it not carbon? Because you
see carbon surfaces here but not there. So we actually integrate the antenna within this
for transmission purposes. You can't have it in carbon. Oh, I see. Okay, wow, and then you've got
an awful lot of stuff going on. We should get the rear wing active, shouldn't we? So there's four
motors in there that run. Yes, they're driven by electric motors which is a first. Previous
McLarens have been hydraulically operated and you'll see as the wing extends rearwards
into race mode, the wing in itself can extend. So that's road mode now, isn't it? This is road mode
and then we can deploy the wing 300mm rearwards for race mode. Which isn't road legal, just like
P1. Correct. As soon as you send the wing out the back that far. Correct, correct. It isn't
road legal. And then we have up to 29.5 degrees of adjustment in the attack of the wing. It's
weird, isn't it? I mean, I don't understand aero at the best of times but you look at that wing
and you go, well, hang on, that looks like it should be giving you lift rather than downforce.
Why is it not up at an angle? So if you think about the ground effects concept, so we're using
the underbody of the car to generate the downforce. What the wing is actually doing by extending
rearwards is effectively increasing the length of the diffuser. So the overall active area of the
diffuser. So the angle of that diffuser coming up sort of meets the back of the spoiler and so you've
just got a virtual diffuser out the back. So in the purest possible terms, it's a long tail.
Yeah, absolutely. And there's a weird thing here as well. I've noticed there's like a cutout through
the arm of the upright there. What's going on there? Yeah, so that's basically when we're
cornering, if we get any pressure build-up on the inside of the wing, this effectively allows us to
relieve that pressure and also make sure that we keep the wing functioning as we need to. Oh, really?
And so 1,399 kilos and these are the aluminium wheels, aren't you? But you've got a magnesium
wheel option, haven't you? Yes, we have a magnesium wheel option which saves six kilos. Six kilos
around the car? Yeah. Okay, so that gets you down to your magic 1,399 figure. Yeah, yeah. Do you know
what it's going to be? You're not going to claim a weight, you're not going to tell me a wet weight
yet, are you? Not today. Since we've got the door open, let's go and have a look around the cabin.
But before we even get to that, just look at how crazy the shape of this door is. Look at all the
aero elements here and all these bits and pieces to it. And then of course, we've got the fact that
it's a gullwing door now. McLaren likes to call it its anhydral door. But the main reason they've
done that isn't because it looks cool, although it does, but it means they haven't had to package
all the struts and hinges in this area, which would have upset all the aero work they're trying
to do getting air out from the front wheel arch. It's quite cool. Anyway, come around this side
and one day McLaren realised out quite early on that they wouldn't be able to package
a boot in the nose and their luggage was going to have to go somewhere else.
So it goes on the back deck, but look, you can flip the headrests down and that's where your
luggage goes, room for a couple of helmets or a weekend away. Right, you pop around the other
side, I'm going to jump in. Right, so here we are then, driver's seat of the W1. First things first,
it's amazingly carved out, this door, you've got a real sense of space and I love this sort of
grab handle-y bit you've got here, that's great. Driving position, it's not as extreme as I
expected. I know they've raised the foot position, but honestly it feels like they could have raised
it a bit more. It's not super extreme, but the view out is really good. These A-pillars are
narrow, you can see the tops of both wheels and you've got a good down angle on the road over the
top of this beautiful, so slim, so slim, this little steering wheel. I know it's flattened at
top and bottom, but it's lovely. Also the aerodynamicists have been loose in here,
you see this area up here, so this is a vent to get air into your face, there's a couple more here,
but they've used aerosurfacing to get the air over the top of the binnacle and into your face.
That's all digital by the way, that's a big digital screen there. All of these are now made
of aluminium and they've got all the little knurling on them and it's the same down here
where you've got this sort of screen around here and the cup holders which slide in and out,
so you've actually got a reasonable amount of storage down here and your USB slots and
everything else. Look, how to tell this car is a model though, look. Yeah, the steering's not
actually connected to anything. It does have the important buttons on it though for boost,
which will give you your 342 horsepower of electric instantly and your aero button for
the DRS mode. Other interesting things, the seats are completely fixed so they don't move,
the pedals move on their little slider and the steering moves and this material, it's called
InnoKnit, you can have your regular Alcantaras and leathers if you want, but this is actually
a woven material that is quite clever, they can lay it over the top of the speakers like they have
here and the ambient lighting so it glows from behind. It's just one of those sort of little
sustainable innovative little touches they've got and then you look up on the ceiling,
obviously you've got the Gorilla Glass lighting through here to get a bit more light into the
cabin. You've got the, I think they're claiming the world's thinnest sun visors, just three
millimetres thick these and the all-important pad and buttons up there to start and stop the car
and the gear changes and drop it into race mode. Yeah, race mode, that's what you want to be in
isn't it? Race mode drops the car 37 millimetres at the front and 17 at the rear. Four electric
motors drive the rear wing sending it back 300 millimetres for a virtual long tail effect.
In that mode it develops 350 kilos of downforce at the front and 650 at the rear. Let's sum up
what we know so far. Ferrari has taken a risk with the F80, four-wheel drive, V6, electric motors,
Le Mans vibe. McLaren however has stuck close to the P1's template. The focus is still on driver
engagement and purity, just with a massive power hike. 1250 horsepower through the rear wheels.
What we can say at the moment is this is probably going to be wilder to drive than it is to look at.
