SANSI 24W LED Plant Light Bulb Full Spectrum LED Grow Light Plant Lights for Indoor Plants, E26 Grow Light Bulb for Hydroponics Greenhouse Houseplants Vegetable Tobacco, Sunlight White UV IR https://amzn.to/3jCwkX0
J R Peters Inc (52064) Jacks Classic No.4 20-20-20 All Purpose Fertilizer https://amzn.to/3500HCF
🍃Stay up to date with daily life and activities through messaging and pictures and don't forget to subscribe and hit the notification bell! INSTAGRAM- @tropicalplantparty TWITTER- @tropicalplantJc SnapChat- Tropplantparty
AI Generated·May contain errors
Hey, what's up gardening friends? Jeff here. How's everybody doing? I hope you're doing well. I'm
great. I am great. It is about to start raining though. I might zip through this video fairly
quickly. I had a task that I was just determined to get done. This was sent to me as a gift.
I'm growing a little coconut palm. If you've been watching the channel for very long, you know I
love a coconut palm. I've grown an awful lot of them. This one, as a lot of gifts go, no drainage.
I tried to pull it out of its cashpoo, but uh, it's not budget. So, it's just time to repot this
thing. Growing coconuts indoors is not the same as keeping them outside, right? There's a little
cellar spider on the pot. I turned that around so nobody gets triggered. Not everybody likes the
spiders. Indoors, but this, I'm outside right now. This is not, not inside my house. That'd be pretty
cool though. Indoors, you still want some moisture retention, but really good aeration and drainage.
Outdoors, you can plant these things up in like straight up sand. They're not going to be too
picky about what you put them in. I just did that so I could mix up some of the soil that was left
in the bottom of that container. This is an all-purpose potting mix. Lots of perlite. There's
an earthworm in there. It must have been in the bottom of this pot. Lots of perlite, and it has
some solar yeast fertilizer. For a coconut, I like to make sure that things are nice and sandy and
nice and gritty. So all this that you're seeing right here is just a fine white sand. You don't
have to do this. You can use chunky perlite. You can use gravel. Just use whatever you need to so
that things drain really, really well. I have just always had the best of luck when I use a nice
organically rich mix with a large portion of sand. This isn't quite 50-50. I don't think it needs to
be 50-50. I think even just having 15 to 20 percent sand would be totally fine. I just went
above and beyond here because things get pretty humid in my grow space during the winter months.
So we want to be sure that you have all that drainage and airiness for when this is inside.
That should be pretty good. I don't know why I didn't say that. I know I did not get deep enough
into this pot. There's all kinds of stuff down here that hasn't blended up yet, but it's starting
to rain and I think that this is enough to fill up this container. So it's not a huge upgrade. I
would honestly, if I were you, I would go with a larger container than this. This is pretty small.
It's still going to grow just fine in this pot, but I mean really by the time winter comes around
it may have outgrown this container. So that's something to keep in mind. Coconuts, they don't
always do a lot of growing from up top while they have a lot going on down below. Is that making
sense? When they're younger, their roots come out very quickly and the top's a little bit slow and
then the top starts to speed up. They kind of do things in intervals of things. A lot of times
they'll root out before you even get any type of seeds or growth point to come out and then
other times their growth point won't come out and you won't see roots for an extremely long time.
That's what's more common with their coconuts is you'll see some growth start to come out the top
like, um, excuse me, don't you need roots? Roots are usually pretty helpful if you want to grow.
Like I mentioned, that doesn't want to come out. That's why I'm just repotting it because
now I can just get it. I would prefer that it would come out though so I could gently
get it off of or out of that pot that it's in. I don't want to tug at the roots.
Yet look at that, the bottom of this is bulging out. I've got roots coming out the bottom of it
and everything so that's why it was being stubborn because it was hooked in there.
Oh, this is gonna be so happy to be in a fresh mix. This pot is tiny
and that's a perfectly fine-sized pot for getting them started. You see what I'm talking about? So
not much going on with the roots, a lot going on with the top. I'm gonna get that centered in here
just like so. See that? See how it's centered? I did a good job, didn't I? Give me praise. I'm
really bad at centering things. And then I'm going to fill it up to, well, you can see where that
waterline was. That's where I'm going to fill it, where that darker spot is on the side of the nut.
That is as deep as the soil needs to go. It's not going to kill it if you go much deeper than that
but things are going to be prone to more rot the deeper you go with it. I'm going to slowly lift
things up as I go. I'm actually, I'm even going to mount some soil in the middle. So you see that?
I'm going to pull some of the soil together and mount it because those roots on here have a slight
concaveness to them. You really don't want air bubbles to be trapped under there. It'd be hard
to keep this thing hydrated if there's air bubbles all over the bottom or in the bottom
of this planting mix. When they're this small, I'm not that concerned with fertilizing them all that
often. You want to make sure to do it. I'd say about every two or three months but it's in a
fresh mix and it's still got all that good stuff inside the coconut that it's using to sprout.
Once there are, I would say, probably three to five mature leaves on the plant. Not mature,
mature. These are strap leaves right here. Three to five strap leaves on the plant. That is when
I'll be more on top of the fertilizing. I mostly just want to encourage really good root growth
at this point. That is the most important thing. So you can use a root stimulator,
which I will probably do it another time. Not right now because as you can see it's raining
so I don't need to do that right now. But that will help get things moving along. I have found
when they're really small and they still have this much coconut left, this much husk left around the
base of the plant, that they can be much more prone to rotting because you have this giant
contraption here holding on to all that moisture. So that's why I don't go nuts with the fertilizing
with organic fertilizers. Anyways, things that are, how would you put it, heavy. A heavy type
of material that's going to potentially attract the good and the bad to set up a nice microbiome
around the roots. Things that you want around the base of the plant but could lead to some
issues with rot if the plant isn't far enough along. And that's pretty much it. I didn't disturb
the root mass so I'm not that concerned about the aftercare, about making sure that it sets
in place that's not getting very much light. That's something to try and be careful about.
I'm gonna let this keep getting the same light it was getting because I barely messed with its roots
at all. We're supposed to have overcast for the next several days and it's supposed to keep on
raining so that influences things quite a bit as well. I make sure to take these inside when
temperatures are starting to drop below about 50 degrees Fahrenheit. They don't like to be cooler
than that and I prefer to only repot when temperatures are going to be consistently
over about 75 into the 80s Fahrenheit. It's just not a great idea to do it when the temperatures
are much cooler than that because they're going to be more prone to rot. They're not going to be
growing actively. They're not going to be pulling in water so that water's just sitting around the
roots. Nothing's happening with it. You get anaerobic action going with bacteria and then
you end up with a rotten dead plant. I would expect to repot this. Well, really like I said,
I'll probably need to pop this into a new container at the end of this growing season
which isn't ideal but the container is just cute. It's just a cute match and that's why I used it
something that doesn't come in at the top like this would be smart because if this roots out
fully into this container that's why I want to pull it out before I move it inside. It's going
to be a nightmare getting it out because the root mass down here is going to be bigger than the
hole at the top so this is just going to be for a few months. I'll get it out of here before it's
in there nice and tight and put it into probably I would say an eight inch maybe even I might just
bump it up straight into a 10 inch container because I know it's going to be in the growth
space where things are nice and warm. Wouldn't it be nice and warm? I wouldn't do that. These
are a palm where you can keep them in a fairly small container and they'll be okay. They just
want that good drainage. They want airflow. They want warmth. They want humidity. All of those
things if they are in a pot that's too big for them and indoors where it's typically like 68 to
72 Fahrenheit and there's just lots of moisture around the root mass they'll just die. I always
keep these more on the dry side during the winter time and yeah I know this was short but I think
that's going to do it because it's starting to rain harder. You guys are stuck to the tripod. I'm
going to try and do this smoothly. There's not a lot else to say. I've done a lot of coconut palm
type videos. That was a nice quick rundown with things and I think that this looks nice. It looks
adorable. It's not a variety of any type that I'm aware of. It's just a new Sephara of some sort.
Comment down below. Tips, tricks, suggestions are always appreciated and I hope everybody's
doing well. Having a great day, great life and it's going to be absolutely beautiful for you
and of course as always and most importantly, hey baby,
it's a good boy. I know you don't like the thunder. Keep on growing. Bye-bye.