Day In The Life Of An Electrical Engineer | Power Industry

The Daily Snap
16 followers
18 Video Views·Jun 17, 2026
AI Generated·May contain errors
My name is Nenad. I'm an electrical engineer in the power industry.
On work-from-home days, this is my ideal morning. With two kids and a full-time job,
I don't hit this every day. But even one minute of meditation, three minutes of kettlebells,
and one sentence in a journal can put me in a much better spot before work starts.
By the time I'm making tea, I'm shifting into work mode. I then tap the Brick app
to block social media and remove distractions, and then work begins around 7.30am.
Today, I'll show you what I actually do as a Protection Controls Engineer.
From project calls and team coordination, to the substation drawings we use to design
and protect the grid. I'm just waiting for the VPN to connect in, and I'm in.
Whenever I begin my day, I like to jot down my most important tasks that I have to get done.
And as a design engineer, you have typically three or four projects going on at the same time.
So I wrote down a couple projects that I have to work on, and many of them revolve
me doing some reviews. Whether it's my own work or a peer review of somebody else's work,
we are designing substations. So I have to make sure that our I's are dotted, T's crossed,
everything looks good. Because if you get something wrong, that could be very costly
as far as a monetary thing, but also it could potentially injure somebody or even worse.
The discipline that I work in is called Protection and Controls. And that means that we have to,
in a substation, make sure everything is connected properly and make sure that the
breakers that are involved and all of the relaying equipment and all the information coming to them
acts appropriately. So if a fault does occur, the right things happen in order so that you can
protect everything inside the substation, as well as the power flow that's going through this entire
system. So this is really the electrical part of the job. For my computer setup, I've got two
monitors here, and these are really helpful. These are 27-inch monitors. I have my open
computer there, my open laptop. And what I do is I log into VPN so that I'm able to work from home.
These monitors are really, really good at looking at prints. So I am going to have to get on a call
here. We've got to discuss a project. By the way, for communication, we use Teams, Microsoft Teams
and Outlook. So Microsoft products, this is industry standard. Everybody uses these two.
So the way that I understood it is that we let the field team do the updates and they're going
to have the 411 and the 421. A big part of what I do in engineering in general is coordination.
So that means attending project meetings. No, it's definitely not the most exciting part of the job,
but it's where decisions get made and bottlenecks and action steps are identified. So communication
is super important, both internally with people I work with, but also externally with different
groups. On these calls, project managers or PMs, they coordinate between all sorts of teams from
permitting, to real estate, to environmental, to conceptual, to engineering, construction, etc.
All of these moving pieces must come together to actually build a substation. I can't actually show
you real schematics that I'm working on due to confidentiality reasons, but these are the type
of prints that we look at daily. In order for us to go from the computer, from this to this,
because really this is what the field teams see, they see a printed package. So it's not
quite like Iron Man, you have him over there designing everything by hand and telling Jarvis
what to do. No, the field teams that actually construct these substations get everything by
hand. A typical substation package for protection and control has a top down approach. So the first
drawing that you'll encounter is a one line diagram. It's called the one line because you're
not showing the phases. So typically this would be, for instance, phase A, B, C. We dive a little
deeper in. We go from the 30,000 foot view to the 10,000 foot view. We've got three lines now. So
we're kind of zoomed in a little more. So over here now, we're concerned with the CT connections
because the current transformers, they reduce the current coming into the relay so we can protect
these devices. And you can see how that's all kind of connected. So those are three line diagrams.
And as we dive a little deeper in, you get into some wiring diagrams. So now this is how the
devices are actually wired up. So we went from sort of a 30,000 foot view to 10,000 foot view.
And now we're kind of on the ground view. And this is really what the field team is looking for.
And so really this field here, it's quite large in that there is so much to learn. And the learning
curve I always say with junior engineers is that it takes probably around four or five years to get
particularly good and well-versed, which tracks because that's also the amount of time in the
10,000 hour rule. Time for lunch. I've got some errands to run and then back to it.
Okay. Got caught up in quite a few different meetings. Time to eat and work. I missed
breakfast this morning. I had a little workout, so I'm starving. I've got a big sandwich here
and some soup. After lunch, I usually have fewer meetings so I can focus more on the actual
engineering work that needs to be done. Show you the software that we use. So here it is.
It's called MicroStation. We wanted to go ahead and call a breaker, Circuit Breaker 225. We can
go ahead and do that. Whatever we want to call it here. If we need to copy something over,
it's in essence, it's a drafting tool that we use. Here I am checking a 230 kV circuit breaker
tripping scheme and comparing the wiring drawings back to the elementaries. So working digitally
helps because I can quickly search for the equipment and verify that everything matches.
One nice thing about working from home is that there are typically fewer interruptions than at
the office. So I'm able to focus more on the technical items and that's why I like having
a hybrid schedule. The office is great for collaboration and sharing ideas and things,
but home is where I can usually sit down and work through the details. A little chest break. I just
got a quick phone call from a co-worker and we're discussing the projects and what we have to do.
So I figured I'd take it outside. It's a nice day today. All right. My day's coming to an end. I was
able to get some of the check done, which is good. What I like to do is I just like to go through my
emails at the very end to make sure there's nothing I missed. And then I leave myself notes
so that I can pick back up again tomorrow. And if you're watching this because you're trying to
figure out your own path in electrical engineering, I put together a free engineering career roadmap.
It breaks down what to focus on as a student all the way up to a senior engineer. It's linked in
the description below. Work usually wraps around 530 and then it's time to switch from engineer
mode into dad mode. And that's honestly one of the hardest parts of working from home. And so
making sure that work doesn't bleed into the rest of the night. And I do value that more than
anything in the world. Got the guac ready. I'm going to have some tamales and I had a little helper
squeeze all this for me. So that's a real work from home day to life of an electrical engineer.
If you want to see what this looks like from the engineering management side,
let me know because that day looks a little different.
