In this video, I restore a poor-condition Art Deco vanity that looks like it had been left out in the rain for years. The wood was water-damaged, the finish was ruined, and many people would have considered it beyond saving — but I decided to take on the challenge and bring it back to life.
You’ll see the entire restoration process, from assessing the damage and repairing the structure, to stripping, refinishing, and transforming this neglected piece into a stunning Art Deco vanity once again.
If you enjoy furniture restoration, DIY projects, woodworking, or watching dramatic transformations from start to finish, this video is for you. Restoring old furniture like this is not just about the final result — it’s about preserving craftsmanship and giving forgotten pieces a second chance.
You can see there, there, there.
But that's not the main problem, this is.
But this is my murder tent.
Hi everyone and welcome to the latest video.
We're going to be working on this vanity or dressing table as it's called here in the UK.
This is for a customer and she actually wants me to replicate something I did some time ago
and I sold it on my Etsy shop
and I've never actually come across a piece like this since.
So she's actually found this, I think she found it on Facebook marketplace.
She sent this up to me and she wants me to replicate this piece that I've done previously.
So I thought I'd do it and video it and show you what I'm going to do with this.
Because the customer saw this, obviously I haven't had a look over it.
So we'll have a look over it now and see exactly what he's doing.
First thoughts are it's definitely been left out in the rain
and I'll show you why in a second.
But as always, sit back, relax and enjoy and thanks for watching.
The piece itself has got quite a lot of water staining.
You can see there, there, there on the drawers.
So I'm pretty certain this has been left out in the rain.
You can also see there where it looks like water's run down.
Obviously, terribly finished wooden furniture left out in the rain isn't good.
So hopefully we won't come across too many nightmares with this one.
All this finish has gone here.
The finish on the top is really patchy and here and all down the sides.
The drawer's not sitting right, it goes too far in.
I'm pretty certain it needs to go along those lines.
But that's not the main problem.
This is, as you can see, this top is pulling away from the body of the dresser.
So I'm guessing because it's been in the rain and there's a lot of bare wood exposed,
it's actually bowed or bent up.
So that's one of the first things we'll need to look at.
The drawers, some are okay, some aren't.
So they may not be in the right position, so I need to look at that.
But obviously that's not sitting right.
The sides aren't too bad and I don't know if you can see that on camera,
but it's got, again, this is an oak piece.
Most of it is solid oak, but there is oak veneer as well.
But this is like a nice tiger grain, quarter sawn oak.
Obviously, this is the back.
You can see there at one point this will have had a mirror.
But it doesn't come with a mirror.
The customer's not sent a mirror up.
So I'm assuming she's bought this without a mirror, which is fine.
The hardware certainly isn't original.
These are actually broken.
They had the crystal knobs on, but they've just fallen off.
Now the customer wants me to either source or make
pulls that were the same as the piece I did previously.
Now they were original to that piece.
I've never seen anything like it before.
Some of you really liked them.
Some of you really didn't.
But that's what the customer wants.
So I have been looking to see if I can get some replacements for those.
I'm really struggling.
So I might have to have a go at making my own.
But we'll cross that bridge when we get to it.
Okay, so it's not terrible.
It's also not great.
The main concern is this top and the fact it's warped like that.
I really hope I can get this straightened out because obviously it's a key part of this.
And if I can't then I'm going to be struggling.
But other than that, it looks like there's a few repairs to do.
Some drawer adjustments, a complete refinish.
I'm guessing there's going to be a lot of water stains on this.
So there's going to be some oxalic acid treatment more than likely.
So enough of all that.
Let's just crack on.
Right, let's try and get this top off.
There we go.
Luckily, half those glue blocks, the glue had dried out.
That glue block's gone.
That one's not there.
Now you can see how filthy this is, look.
Right, I just need to focus on this top before we do anything.
Because it's probably really difficult to see on camera.
I'll exaggerate it.
This top is solid oak but it's made in three planks.
One, two, three.
And I think what's happened is it's bowed.
So it's bowed that way.
I'm just exaggerating it.
So the plan is we need to clean all this up, get it down to the bare wood.
And try and try to steam it and flatten it.
It might seem a bit odd now doing the sanding.
Because obviously I've got to try and straighten it.
But I want all the finish off for the next stage in order to get the best results I can.
It's not obviously finished, Sam.
There's going to be a lot of work needs to be done on this yet.
But I just need to get all the finish off ready for the next part.
Right, got all the finish off now.
And as you can see, there's quite a lot of staining on the top.
I mean, I don't know what that is yet.
Hopefully that's going to come out.
But this is watermarks.
There's some there, there's some here, there, all over it really.
So I'm pretty sure this has been left out in the rain.
And I'll show you what I mean by it being warped.
You shouldn't be able to see anything under this rule, this straight edge.
Hopefully you can see there.
It's touching there, touching there.
And it's just bowing.
Big gap underneath there.
So we're going to try and straighten this.
Wish me luck.
Some of you might have seen me make this in a previous video.
And this was my DIY steaming bag.
And I'm going to use this but I'm pretty sure this won't fit in it.
So okay, it's had about 20 minutes this now.
Obviously, I don't want to take it out too soon because I'll have to put it all back in again.
But I think it's really hot, the wood.
So I'm going to check it now and see if it's flattened it off a bit.
I'm going to let this cool a second before I burn my hands.
I think it needs a little bit more.
It's definitely reduced that gap but I still think it needs a little bit more.
Okay, let's give this a go.
What I want to do now before it cools down is just clamp it down to the bench.
Right, okay, that's all clamped.
I'm clamping it down to keep it flat.
And once it's dry, it should stay in that position.
So just a case of leaving that to dry now.
Still a little bit curved but a lot better than it was.
I was going to leave these nails in and just let it sit on top of the nails.
But these have been nailed from underneath.
Which obviously I can't do now because I can't get a hammer in.
Just so I can make this sit right, I'm going to knock these nails out.
And I'll have to put some nails in from the top.
And it's already got nail holes in it so that's no problem.
Just knock these out.
Yeah, I'm not very happy with that.
It's still got this gap here which I'm not very happy about.
So I'm going to give it another go at the steaming.
Maybe I didn't leave it in long enough.
I'm going to give it another go at the steaming.
And I'll see how we go from there.
I won't film all that because you've seen it before.
So I'll put that on and then we'll get on with something else.
Maybe one day you'll cross paths
And you both got new purpose
And the life you used to live is left within that old apartment
Maybe nothing's ever done
And your chest is set on fire
But I promise you it's nothing but a cold hearted lie
Cold hearted lie
I know you don't want it
Your heart's still burning
Just been scraping this side now.
And I just wanted to point out here
This has got loads of scratches coming across this frame this way.
And a bit of a gouge out of it.
Not a gouge but a bit of scrub in there.
It looks like it's been on this side on the floor
And somebody's just dragged it across the floor.
Because it just scratches all the way through it.
So we need to deal with them.
But I'll just carry on getting this finish off.
The unit itself is pretty much stripped now.
Or scraped, whatever you want to call it.
I'm going to do the drawers.
Now this one has got this detail on it.
So I'm not going to be able to scrape that.
So I'm going to have to use a stripper.
So rather than just use a stripper on that bit.
I'm just going to use a stripper on all the drawers.
It looks a bit more solid.
The finish on the drawers as well.
It doesn't look as flaky.
So we'll get this hardware off.
Use a stripper.
Right I've redone the top.
I've re-steamed it.
Clamped it.
Let it dry.
And it's a lot flatter than it was.
It has opened up a little bit of a joint at the top.
Where it's sort of gone like that.
So we can sort that out.
What I need to do now is just prep everything.
Ready for the octalic acid.
Because like I said earlier.
This is full of water stains.
So that's what we need to try and sort out.
That's the worst thing about this at the minute.
There's a couple of repairs I need to do as well.
But I'm just going to prep this.
And then prep the main body.
So the top's cleaned up pretty well actually.
This is what I mean by.
Because this was warped up like that.
And I flattened it.
It's pulled the top of this joint out a little bit.
And that one a little bit.
So I'll have to do something with that.
But it's not affected the strength.
It's still connected pretty much all the way through the joint.
It's just this top here.
The only issue I've got with staining.
Most of the stains come off.
Sort of.
I've got a bit of a couple of dark marks here.
And there's still a couple of water stains.
So it still needs oxalic acid.
But I'm happy with how that's come out.
Next.
Finally all the sanding's done.
Well I say all the sanding.
All the sanding I want to do before the oxalic acid.
And then it's going to need completely sanding again.
With a different grip.
Yeah.
This is what I have to put up with.
I've just give her a cork.
She's eating it.
Oh that's a big stretch.
Yeah.
I can't play because I'm busy.
I can't play can I?
Hey you've got something on your face there.
Go dear.
Oh never mind.
I'll send you in.
Okay two minutes.
Right it's finally time for the oxalic acid now.
A lot of the stains seem to have come out.
Or they're not as bad after sanding.
But there is still quite a lot of stains.
So I'm going to give it a coat of oxalic acid.
I'm going to use the one I always use.
Which is the Gill Boys Oxalic Acid Crystals.
I've got a discount link in the description of this video.
If you want to try these.
This isn't attached yet.
It's just easier to do it while it's rested on the top.
Right just leave that to do its thing now.
And hopefully fingers crossed all them stains will have gone.
Notice this back panel is full of woodworm holes.
So it just looks like it's isolated to this.
So I've got this treatment.
I can't see any signs of any any woodworm.
So I'll just give it a treatment.
Right the oxalic acid's done its thing now.
It's actually removed that one really well.
That dark mark.
I just need to give it a rinse off now.
Okay there's a couple of repairs that need doing on it.
Mainly a lot of these glue blocks have come off.
Both on the top and there's some on the bottom.
So these are the ones that have fallen off.
I think there's some missing.
So we'll get that sorted now.
There's quite a few missing.
There's one there.
One there that holds that in.
Another one there.
And this one needs to come off.
Because the glue's failed on the back.
So I need to re-glue that.
I was just about to start doing some work on these drawers.
And I noticed there was a mark on this.
So I started picking away.
Just to get rid of whatever it was.
And what I've noticed is, look.
I don't know if you can see that, look.
I did mention earlier that the back had a bit of woodworm on it.
And it looks like a rogue worm.
Or larva.
Beetle larva has got through to the front.
There's no sign of it.
There's no sign of any live ones on this piece.
So I'll just have to fill that.
A little blighter.
Just leave that a bit proud.
Because it'll shrink back.
Leave that to dry.
This is the gap I was telling you about before.
When I flattened it.
It's pulled the gap a little bit.
So I just need to fill that.
It's not structural.
Okay.
More sanding.
Well these all need to go over now.
With 240 grit.
Because the oxalic acid in the water has raised the grain a little bit.
It's time to try and tackle some of these bad scratches.
Now they have raised up a little bit.
Because I've used quite a lot of water to neutralize the oxalic acid.
But there's still a few that are quite deep.
So I'll sort these out.
Okay.
That's lifted quite a bit that.
So I'm going to do that around the rest of the piece.
See if we can get this to look a lot better.
Just leave that to dry now.
And then we can start the sanding.
A little bit of veneer missing there.
There's a little piece there as well.
So I'll do that while I'm at it.
These are the other glue blocks that need sorting.
These are completely missing.
I don't know.
They must have been missing a long time ago.
So the other side.
That side has got glue blocks in every corner.
Just to strengthen this skirt.
So I'll replace them now.
Right.
This bit that I did use this iron on.
I've just given it a sanding over with 240 grit.
There's a little bit of filler there.
So that I do need to leave that to dry.
But it's come up really well.
Right.
I'm going to sand everything else now.
I won't bore you with that.
But everything else with 240 grit now.
Right.
Finally.
All the sanding's done.
I need to put this beading back on.
But more importantly.
I need to put this back on.
So this was glued and nailed originally.
So that's what I'm going to be doing.
Place this where I want it to go.
Marked it.
So I just need to...
We're pretty much at the stage now where I want to add some stain to this.
But before I do that.
I've just put this hardware back on.
Because the drawers are totally out of alignment.
And they look okay now.
But when you push them.
That doesn't go in.
That goes in too far.
That one's okay.
And this one pushes in.
So the drawer stops need looking at.
So that's what we'll do now.
Before we put any stain on.
These are the drawer stops.
Now they can either...
They're normally at the back of the unit.
To stop the drawer pushing.
There's like blocks on the runners.
On the top of the slider.
Or on the bottom.
These are on the top.
Now these don't look too bad.
But you can see there.
That's worn away.
At that side.
And a little bit on that side.
They're pretty much fine up there.
But that's why that one's pushing in slightly.
This one is obviously the worst.
Because I've taken off the drawer stops.
When I did the top.
So I just need to refix them.
Once it's in line.
Right.
Let's get on with it.
I know these are okay.
So I'm just going to take a measurement of these.
I've just tipped this upside down.
To work on these drawer stops.
And I've noticed something else that needs sorting out.
These sliders.
This one's got four.
That one's hanging off.
That one's been...
I don't know what that's been stuck on with.
And these are all missing.
So that needs sorting out as well.
Another little friend.
Sheltering from the rain.
Eating his monkey nuts.
Okay.
Stain time.
I'm going to do this a two-tone.
Because that's what the original piece was.
And that's what the customer wanted me to replicate.
So first colour.
Walnut.
This is the front middle drawer.
If you remember.
Obviously this has got some detail on it.
So what I want to do.
I don't just want to do all this one flat colour.
I'm going to do this.
The contrasting colour.
That the rest of the piece is going to be done with.
And for those that watch my channel a lot.
You'll probably know what the other contrasting colour is.
But I'll show you that in a second.
Okay.
I might as well do the contrasting colour now.
You won't be surprised to know.
If you follow the channel.
It's ebony.
Right.
It's time to add the top coat.
And I've set this up.
This is my murder tent.
You'll have seen on a previous video.
I was looking for a solution to avoid over spray on everything in this area.
And I had a load of suggestions.
And one of them was like a garden gazebo.
A pop-up gazebo.
Now I bought the smallest one I could.
And I did measure it.
It just won't go up properly.
It's too wide.
So what I've done is.
I've just made a few little amendments to it.
Taken a few areas off.
And braced it up.
And let's see how it goes.
I'm going to do a acrylic varnish top coat on this.
A poly top coat.
And the reason I'm doing that.
Is because that's what the previous piece had.
So I want to make it as close to the original as possible.
So that's what I'm going to use.
Don't use it often.
But I'm going to just wipe this down.
And then I'm going to spray it.
Hence the tent.
Okay.
It's just the last few finishing touches now.
And we are pretty much finished.
I'd like to say a massive thank you.
To everybody that's watched my videos.
Over the last 12 months.
I really do appreciate your support.
Hopefully we can carry on.
Onwards and upwards next year.
And hopefully you'll enjoy those videos too.
So all the things left for me to say.
Is thanks again.
And I'm wishing you.
And all your loved ones.
A very merry Christmas.
And a prosperous new year.
So all the best from me and Daisy.
And we will see you on the next one.