10 Biggest Trucks That Were Banned From Public Roads — You Need To See This!

The Mechanical World
15 followers
What if I told you there are trucks so massive that governments around the world have effectively banned them from public roads?
In this video, we're counting down the 10 biggest trucks ever built — from giant mining haul trucks capable of carrying hundreds of tons of rock to NASA's legendary Crawler-Transporter, the heaviest self-powered vehicle ever created.
These engineering marvels are so enormous that many must be shipped to their job sites in pieces and assembled on location. Some weigh more than a fully loaded passenger jet, while others can haul enough material in a single trip to fill entire neighborhoods with dirt and rock.
#machine #Equipment #HeavyMachinery
What if I told you there are trucks so massive, so unbelievably enormous,
that governments around the world have made it illegal for them to touch a single public road?
We're talking about machines that weigh more than a fully loaded Boeing 747,
trucks so wide they could block an entire highway,
and vehicles so heavy they would crush asphalt like a cookie.
Some of these monsters have to be assembled piece by piece at their worksite,
because there is literally no road on Earth that can handle them.
Let's go.
Number 10, Caterpillar 794AC.
Coming in at number 10 on our list is a beast that most people have never heard of,
but in the mining world, it's an absolute legend.
The Caterpillar 794AC is one of the largest haul trucks ever built
by the American heavy equipment giant Caterpillar.
This truck has a payload capacity of approximately 291 metric tons.
To put that in perspective, that's roughly the weight of about 200 average cars being hauled in a single load.
The 794AC is powered by a CAT C175-16 diesel engine that produces around 3,550 horsepower.
For comparison, a typical sedan on the road produces about 150 to 200 horsepower.
So this truck has roughly 20 times the power of your daily driver.
The 794AC uses an electric drive system,
which means the diesel engine powers electric generators, which then drive the massive wheel motors.
This gives the truck incredible torque and control,
especially when hauling those massive loads up steep mine inclines.
Now, why is it banned from public roads?
Well, look at the size.
The truck stands about 7 meters tall and is over 15 meters long.
It weighs approximately 628 metric tons when fully loaded.
There is no public road, bridge, or highway in the world designed to handle that kind of weight.
The tires alone on this machine are over 4 meters tall,
each one costing anywhere from $30,000 to $50,000.
These trucks are so large that they are typically shipped to mining sites in pieces and assembled on location.
You'll find them working in copper, gold, iron ore, and coal mines in countries like Australia, Chile, Canada, and the United States.
At number 9, we have the Hitachi EH5000AC-3,
a rigid-frame dump truck manufactured by Hitachi Construction Machinery.
This Japanese-built giant can haul a payload of approximately 296 metric tons,
making it one of the largest trucks Hitachi has ever produced.
The EH5000AC-3 is powered by two Cummins QSK-60 diesel engines,
which together produce about 2,850 horsepower.
Yes, you heard that right.
This truck runs on two separate diesel engines working in tandem.
The dual-engine configuration provides reliability and redundancy in mining operations,
which is critical when you're operating in some of the most remote and harsh environments on the planet.
When fully loaded, this truck tips the scales at over 550 metric tons.
It stands roughly 7.4 meters tall and stretches about 15.5 meters in length.
The truck uses an AC electric drive system designed by Hitachi,
which provides smooth acceleration and excellent retarding ability on downhill hauls.
This machine is obviously not allowed anywhere near a public road.
Its sheer weight would obliterate any standard road surface,
and it is far too wide to fit in any normal traffic lane.
The EH5000AC-3 is commonly found in large-scale open-pit mining operations
across Australia, Southeast Asia, and the Americas,
where it spends its entire working life going back and forth between the pit and the dump site
without ever touching a public road.
Number 8, Komatsu 980-E4.
Number 8 is the Komatsu 980-E4,
an ultra-class haul truck built by the Japanese manufacturer Komatsu.
This truck has a nominal payload capacity of 360 metric tons,
which makes it one of the top-tier haul trucks in the global mining industry.
The 980-E4 is powered by a Komatsu SDA-16 V160 diesel engine,
producing about 3,500 horsepower.
The truck uses Komatsu's proprietary AC electric drive system
called the Komatsu Trolley Assist System,
which can optionally connect to overhead electrical lines on long uphill hauls
to save fuel and reduce emissions.
This technology is becoming increasingly important
as mining companies around the world look for ways to cut their carbon footprint.
When loaded, the Komatsu 980-E4 weighs approximately 625 metric tons.
It is about 15.6 meters long, 9.7 meters wide, and stands 7.3 meters tall.
Each of its six tires is a massive 59-slash-80R63 size,
among the largest tires manufactured in the world.
Like all ultra-class mining trucks,
this one is permanently banned from public roads in every country.
It is assembled on-site at the mine and stays there for its entire operational life,
which can be 10 to 15 years depending on maintenance and workload.
These trucks operate in some of the biggest mines on the planet,
including iron ore mines in Australia and copper mines in Chile.
Coming in at number 7 is the Terex MT6300AC,
which was once the largest truck in the world when it was introduced in 2008.
This truck was manufactured by Terex Mining
and later became part of the Basiris International lineup
before Caterpillar acquired Basiris in 2011.
The MT6300AC boasts a payload capacity of 400 short tons,
which is approximately 363 metric tons.
It was the first truck in history to achieve a 400 short ton payload rating,
which was a monumental achievement in the mining industry.
Powering this giant is an MTU20V4000 diesel engine
producing approximately 3,750 horsepower.
The truck uses a GEAC electric drive system for its propulsion.
When fully loaded, the MT6300AC has a gross operating weight of around 660 metric tons.
The truck is about 15.5 meters long, 9.8 meters wide, and 7.9 meters tall.
To give you a sense of scale, this truck is wider than a standard two-lane road.
If you parked it on a highway, it would block both lanes with room to spare.
That is precisely why this truck has never been, and will never be, allowed on any public road.
The weight alone would destroy bridges, collapse road surfaces,
and cause catastrophic damage to underground utilities.
After Caterpillar acquired Bucyrus, the MT6300AC was eventually phased out,
but many units continue to operate in mines around the world,
hauling massive loads of earth and ore every single day.
Number six, Liebherr T284.
At number six, we have the Liebherr T284.
Manufactured by the Swiss-German company Liebherr,
this truck is one of the most advanced and capable ultra-class haul trucks on the market today.
The T284 has a payload capacity of up to 363 metric tons.
It is powered by the MTU20 V4000 diesel engine, which generates up to 3,750 horsepower.
The truck uses the Liebherr LeTronic Plus AC drive system,
which is known for its efficiency and reliability.
What sets the Liebherr T284 apart is its incredible engineering.
Liebherr manufactures many of the critical components in-house,
This vertical integration allows Liebherr to optimize every part of the truck for performance and durability.
The T284 has a gross operating weight of approximately 592 metric tons when fully loaded.
It stands about 7.8 meters tall and is 9.5 meters wide.
The truck's body can hold a heaped capacity of over 230 cubic meters,
which is enough to fill a small swimming pool several times over.
This truck is strictly prohibited from public roads due to its extreme dimensions and weight.
Mining companies that purchase these trucks have them delivered in components
and assembled on-site by specialized crews.
The assembly process alone can take several weeks.
The Liebherr T284 operates in large-scale mining operations
across North America, South America, Africa, and Australia.
Number 5 is the iconic Caterpillar 797F,
arguably the most famous ultra-class mining truck in the world.
When people think of giant trucks,
the CAT 797F is often the first image that comes to mind.
The 797F has a payload capacity of 400 short tons,
approximately 363 metric tons.
It is powered by the CAT C175-20 Acer diesel engine,
which is one of the most powerful engines Caterpillar has ever built,
producing approximately 4,000 horsepower.
Unlike many of its competitors,
the 797F uses a mechanical drive system with a torque converter
and a planetary power shift transmission, rather than an electric drive.
When fully loaded, the Caterpillar 797F has a gross machine operating weight
of approximately 687 metric tons.
The truck is about 14.8 meters long, 9.8 meters wide, and 7.4 meters tall.
Its six massive tires are each about 4 meters in diameter
and weigh roughly 5 tons each.
Replacing a single tire on this truck costs between $30,000 and $50,000,
and the truck goes through multiple sets during its operational life.
The 797F is obviously banned from every public road on Earth.
Even transporting its components to a mine site
requires special permits and oversized load convoys.
The engine alone weighs over 10 tons.
These trucks are a common sight in the massive oil sands operations in Alberta, Canada,
as well as in iron ore, copper, and coal mines globally.
One interesting fact, the fuel tank on the 797F
holds approximately 3,785 liters of diesel fuel.
At full load, the truck can consume about 800 liters per hour.
That's an extraordinary amount of fuel.
But when you're hauling 363 metric tons of material up a steep mine grade,
that's what it takes?
Number four, XCMG XDE-440.
At number four, we have a truck from China
that has been making waves in the mining industry,
the XCMG XDE-440.
XCMG, or Suzhou Construction Machinery Group,
is one of China's largest heavy equipment manufacturers,
and the XDE-440 is their flagship mining truck.
The XDE-440 has a payload capacity of approximately 400 metric tons,
putting it in direct competition with the biggest trucks from Caterpillar and Komatsu.
It is powered by a high-output diesel engine
producing around 3,500 to 3,800 horsepower,
and it uses an AC electric drive system.
What makes the XCMG XDE-440 notable
is that it represents China's push into the ultra-class mining truck market,
which was historically dominated by American, Japanese, and European manufacturers.
The truck has a gross operating weight of approximately 660 metric tons when loaded.
The XDE-440 has been deployed primarily in Chinese mining operations,
but XCMG has been actively marketing it to mining companies
in Central Asia, Africa, and South America.
Like all trucks in this class,
the XDE-440 is far too large and heavy for any public road.
It must be transported in sections and assembled at the mine site.
Standing roughly 7.5 meters tall and stretching over 15 meters in length,
this truck would dwarf anything you see on a normal highway.
Its entry into the market has increased competition
and is helping to drive down costs for mining companies worldwide.
Number 3 – BelAZ-75604
Number 3 is the BelAZ-75604,
built by the Belarusian manufacturer BelAZ.
Which is one of the world's leading producers of ultra-heavy dump trucks.
BelAZ has been manufacturing massive mining trucks since the 1960s,
and the 75604 is one of their flagship models.
The BelAZ-75604 has a payload capacity of 360 metric tons.
It is powered by a Cummins QSK-78 diesel engine
that produces approximately 3,500 horsepower.
The truck uses an AC electric drive system
and features an advanced traction control system
designed for the challenging conditions found in mining environments.
When fully loaded, the BelAZ-75604 weighs approximately 617 metric tons.
It is about 15 meters long, 9.6 meters wide, and 7.2 meters tall.
The truck is designed for extreme conditions
including the freezing temperatures of Siberian mines
and the intense heat of equatorial mining operations.
BelAZ trucks are particularly popular in the mines of Russia, Kazakhstan,
and other countries in the former Soviet Union,
though they are also used in Africa, South America, and Southeast Asia.
The 75604, like all trucks in this class, is completely banned from public roads.
Its extreme weight and dimensions make it physically impossible
to operate on standard infrastructure.
These trucks live their entire lives within the boundaries of the mine.
Number two, BelAZ-75710.
At number two, we have the undisputed king of mining trucks, the BelAZ-75710.
When it was unveiled in 2013, the 75710 shattered every record
and became the largest dump truck in the world, a title it still holds to this day.
The BelAZ-75710 has a staggering payload capacity of 450 metric tons.
To understand just how massive that is,
imagine loading 300 average-sized cars into the back of a single truck
and driving it up a hill.
That's essentially what this machine does every single day.
The 75710 is powered by not one, but two MTU-16V4000 diesel engines,
each producing approximately 2,300 horsepower
for a combined output of about 4,600 horsepower.
The truck uses a Siemens MMT-500AC electric drive system.
It has eight massive tires, four on each of its two axles,
which is unique among mining trucks, as most ultra-class trucks run on six tires.
The eight-tire configuration helps distribute the enormous weight more evenly.
When fully loaded, the BelAZ-75710 has a gross weight of approximately 810 metric tons.
That is more than the weight of a fully loaded Airbus A380,
the world's largest passenger aircraft.
The truck is about 20.6 meters long, 9.75 meters wide, and 8.2 meters tall.
The dump body has a heaped capacity of 269 cubic meters.
Obviously, this truck is completely and utterly banned from any public road in any country.
No road, no bridge, no highway, and no overpass anywhere in the world
is designed to handle 810 metric tons rolling across it.
The BelAZ-75710 was designed specifically for deep open pit mining operations,
and each unit is assembled directly at the mine where it will spend its entire working life.
Number one, NASA Crawler Transporter.
And at number one, we have something that isn't technically a mining truck,
but is without question the biggest and heaviest self-powered ground vehicle ever built,
the NASA Crawler Transporter.
There are two of these vehicles, known as CT-1 and CT-2,
and they are based at the Kennedy Space Center in Florida, United States.
These machines were originally built in 1965 by the Marion Power Shovel Company
to transport Saturn V rockets and their mobile launcher platforms
from the Vehicle Assembly Building to the launch pads at Launch Complex 39.
They later carried the Space Shuttle and its mobile launcher platform,
and today, CT-2 has been modified to carry NASA's Space Launch System,
the most powerful rocket ever built.
Here are the mind-blowing specifications.
Each Crawler Transporter weighs approximately 2,721 metric tons when unloaded.
That's nearly 6 million pounds just for the vehicle itself.
When carrying a fully assembled rocket and its mobile launcher platform,
the total weight can exceed 8,000 metric tons.
The Crawler Transporter is 40 meters long, 35 meters wide,
and stands about 6 to 8 meters tall depending on the configuration.
It is powered by two 2,750 horsepower diesel engines that drive 16 electric traction motors.
The vehicle moves on four double-tracked crawler treads,
each one measuring about 12.5 meters long and weighing about 57 metric tons.
Each tread contains 57 individual shoes, and each shoe weighs approximately one ton.
The maximum speed of the Crawler Transporter is about 1.6 kilometers per hour when loaded
and about 3.2 kilometers per hour when unloaded.
The journey from the Vehicle Assembly Building to the launch pad,
a distance of approximately 5.6 kilometers, takes about 5 to 8 hours.
But here's what makes this vehicle truly remarkable.
Despite its incredible weight, the Crawler Transporter keeps the rocket perfectly level during transport,
even when climbing the five-degree ramp up to the launch pad.
The leveling system can compensate for changes in grade with remarkable precision,
which is essential when you're carrying billions of dollars worth of rocket and payload.
The Crawler Transporter is the ultimate vehicle that is banned from public roads.
In fact, it doesn't even travel on normal roads at all.
It moves along a specially constructed crawlerway,
a path made of Tennessee River gravel about 2.1 meters deep,
designed specifically to support the vehicle's enormous weight.
Even this special road surface has to be regularly maintained and replenished
because the Crawler Transporter grinds through the gravel with every trip.
These Crawler Transporters have been in service since the Apollo program in the 1960s,
making them some of the oldest still-operational vehicles at NASA.
CT-2 was upgraded between 2004 and 2014 to handle the increased weight of the Space Launch System,
with new roller bearings, jacking systems, and other critical components being replaced.
If you learned something new today, make sure to smash that like button,
subscribe to the channel, and turn on the notification bell so you never miss a video.
Drop a comment below and let me know which truck impressed you the most.
Was it the Bellazess 75-710 with its 450-ton payload?
Or was it NASA's Crawler Transporter,
the 2,721-ton monster that has been carrying rockets since the 1960s?
Thanks for watching, and I'll see you in the next one.
