Proof of Ancient Global Civilization - Finding Mini Megaliths at Phnom Bok, Cambodia

Prehistoric Architecture
281 followers
AI Generated·May contain errors
Today we're back in Cambodia to talk about a megalithic complex on top of a hill called
Phnom Bakh. There's three things about this site that make it unique. The first is that you have
to climb 650 stairs to reach the top of the hill, which is a steep climb using modern cement stairs,
so you wonder how the ancients carried up the second thing to the top, which is a 10-ton sandstone
linga, the largest in Cambodia. Praveen Mohan loves this place and thinks that the linga is
a cosmic antenna. That's not what we're here to talk about today though, because the third thing
about Phnom Bakh that we're going to focus on today is the megalithic temple, where I was able
to take photo and video evidence of stonework that connects this site and Angorian era work,
so we're talking 1100 AD, to the ancient civilization builders of Egypt, Peru, Easter
Island, and even more. There is a lot of out-of-place architecture at this temple complex that clearly
demonstrates a shared ancient knowledge between civilizations separated by time and space that,
according to traditional archaeology, just shouldn't exist. And this is new evidence that I haven't seen
anywhere on the internet or in any books, so I want to show you what I've found, and please comment
below your thoughts. I would really appreciate it. Here we go. Entering in from the south side of the
temple, first you'll see there are a lot of fallen stone blocks. This is a common occurrence at
Cambodian temple sites. It's like this area got hit by an earthquake or cataclysm at some point
in the past to cause all of this destruction and pile up blocks the way that you see here. There
are three main towers on the left that apparently represent the holy Hindu trinity of Shiva, Brahman,
and Vishnu, and on the right are two libraries. So quick note on the libraries while I make my way
to the northmost tower. We played around with tone generators inside of the libraries, and they
definitely have a resonance and react to frequencies being played inside of the walls, and the sound
refracts really powerfully, so you can feel it inside your body at certain hertz levels. The first
two towers are unfortunately caved in and have stayed that way since there's basically been no
reconstruction on Phnom Bakh. It's really unfortunate because the libraries have also been damaged in
some way, so we can only imagine and maybe collect scraps of what the original architecture felt like
when there were tones played inside of it. And we've arrived to the north tower. So anomaly number
one. You'll notice it walking into the north tower. There's a stair-step pattern over the western
entrance. Almost looks like a step pyramid cutout shape. And where have you seen this before?
Tiwanaku, Bolivia. Peru. Mexico. Turkey. It would have been easier just to leave the lintel on top
of the doorway and call it good, right? Just build up from flat. Instead, why did they work in this motif?
And the stair-step pattern was over the western entrance to the north tower as well as the eastern
entrance to the north tower. Anomaly number two. This temple uses polygonal cut blocks.
Megalithic polygonal cut blocks. Blocks that are cut to four, five, six plus sides and fitted
together pretty tightly. This is a commonality across many sites in Cambodia to varying degrees.
The blocks at Phnom Bakh aren't cut and stacked on razor-thin margins like the ones you would see in
Peru. Partly, I think, because clearly the blocks have shifted over time from damage and potential
seismic activity, but the workmanship is clearly still obvious. And if we take a look at a few
examples from around the walls, I've highlighted what I'm showing you in pink. The block types that
I want to call out the most have this L shape. It also means that the blocks have six sides.
I saw this everywhere on the walls in Phnom Bakh. And allow me to show you some examples of L-shaped
blocks from Peru. This is Sacsayhuaman, a much more geopolymer looking block, but the
underlying geometry of the L is there. I'm looking at that big middle block to the right
or left in your case. And then this video was taken walking around downtown Cusco in Peru.
There are lots of examples of L-shaped blocks along this wall. Sometimes it's a small L,
sometimes it's a big L, just like in Cambodia. Different rocks, different continents, different
civilizations, yet something about both of these construction types feels very similar. And then
look at this feature. Let's call this like Anomaly 2.5. Right above where I'm pointing, do you see
the corner of a block that's got like a teardrop imprint for a corner? Why? Why would someone do
this? Why would you not just square that off instead of curving and pointing down the tip of
that corner into something that could break more easily and it's just going to be a bigger pain
to create and fit together? Is this proof of geopolymer in Cambodia or just a very exacted piece
of masonry? And this is the exact construction feature that I witnessed in Peru. Look at these
pictures that I took. You see the curve into a corner ending in a point. This is again from
downtown Cusco. And then here's another instance in the same area of Cusco, but this time the
megalithic stonework is just uncovered and we can see the inside construction. Anomaly number three,
bent stone corners. This is where at each corner of the tower, instead of the rock blocks meeting
at a 90 degree angle on their seams, the builders just curved one side of the rock to act as a
corner. It's beautiful work and I highly doubt it's just for aesthetics. Again, just like polygonal
cut blocks, I saw curved block corners everywhere at the temples in Cambodia and the curved corners
follow the entire vertical length of the wall all the way up to the top. And once again, allow me to
show you Machu Picchu in Peru. As you can see, this wall uses polygonal blocks with curved corners.
No 90 degrees here. And then we have the valley temple in Egypt, once again with its famous bent
corners. Both Egyptian and Cambodian construction have this vertical line running down the cornered
curve, exactly where the 90 degree meeting place would be if the blocks ended at the corner instead
of wrapping around it. Which leads us up to anomaly number four. I think this one's gonna
blow your minds, just like it did mine. This is what I've never seen documented on the internet
anywhere. And my friend Jojo and I were remarking about all the weird anomalies in this tower and
then we joked about only missing one more. One of those super tiny blocks, like these impossibly
teeny tiny, I don't know what to officially call them, you know, what archaeology officially calls
them. So I'm gonna call it a mini megalith. And then there it was, right in front of our faces,
it just like materialized out of the wall. Wait, are you kidding me? So we were just talking about
that notch plug hole. Oh my god, Jojo, you found it. Yeah. And so it's like, wow. This tiny piece
of rock, this tiny piece of carved rock was squeezed in between polygonal blocks that were
using bent corners. And it's just some really cool new evidence to add to the list of unexplained
similarities between what traditional archaeology tells us are unrelated races of master builders
across time. It's definitely a piece of sandstone. Just listen to me scratching the mini megalith
and then the rock around it. Oh, I mean, unless, and that's actual rock. That's like the same rock
that's right next to you. I don't understand. Is it to like, create a resonance and pressure
from one rock to the other? It's the exact same sound. It's not hollow. It's not dirt. It's not
an illusion. What happened to Jojo and I, which I'm just going to chalk up to like divine intervention,
we spoke it into existence, and we saw it happen right in front of us. You would just not be able
to notice this inset piece of stone. You can't even see it from a few feet away. So let me take
you back to our baseline evidence from other civilizations. The Osirian in Egypt has a very
small mini megalith architected into its walls. The Osirian has a rough construction timeline
according to traditional archaeology of around 1300 BCE. And the Coricantia in Cusco, Peru,
has an extremely small mini megalith built into its walls. Construction dates to 1200 AD
approximately, again, according to traditional timelines. And finally, Easter Island. This inset
stone is definitely bigger than what we found in Cambodia and its counterparts in Peru and Egypt,
but the fundamental construction idea is the same. I mean, here's a cruder Inca wall construction
that conveys the same idea, inset mini megalith, just without the precision. And you'll be able to
get a better idea of comparative size between the mini megalith in Cambodia and the one in
the Coricantia in Cusco just by watching this video. It's inside the Coricantia, it's showing
the stone wall that the mini megalith is located in. This video feels really similar to my video
from Phnom Bakh because instantly the scale can be recognized as very similar. All of these
anomalies separately, each in a silo, could be dismissed as coincidence. When taken together,
I do believe that there's a very compelling argument that the stonework of Phnom Bakh
should be cataloged as a data point of evidence of shared ancient knowledge that was somehow
passed down or transmitted across the globe, but we now seem to have lost the thread of.
Phnom Bakh should be included as a very important site that warrants further research as part of
the greater Angkor Wat complex, which is exactly where we head next. During my research, I had two
questions that I think will shed some additional light on Phnom Bakh. Number one, are there any
planetary alignments? As we know, ancient builder races were obsessed with the night sky. Solstices
and equinoxes of planetary bodies like the sun all factored into how these guys engineered
megalithic structures. Did Phnom Bakh have any of these? And number two, where did all the sandstone
come from? And how did they even move multi-ton pieces of rock around? How did they get the 10
ton linga all the way up a 700 plus foot hill? Was it elephants? Was it just a Friday night with
the boys? You get some ropes, you lug it up the mountain, job done. What was happening during this
time that they felt the need to execute such a work on top of an elevated point? So allow me to
tangent slightly because you need to understand where I'm going to go with this. The Angkorian
builders really wanted to make their temple designs, Phnom Bakh included, a square to mimic
the religious symbology of a traditional Vedic mandala, which I think a lot of people imagine
as a circle, but the square is traditional. So in the middle of the square, the mandala has a tower
that represents Mount Meru. Then there's a square around that to represent earth, perimeter walls
to represent mountain chains that encircle the earth, and then surrounding moats symbolize the
cosmic seas, kind of like the depiction that you see in Angkor Wat. Concentric walls and moats
express the outward expansion of the universe from the center, and then the structure should
always be aligned to cardinal points. Any Angkorian temple you could point to is aligned to cardinal
points, including Phnom Bakh. But squares just don't work when you're trying to integrate solstice
points on every outer corner of the shape. So the builders had to slightly squeeze all of their
square designs into rectangles, and they wanted to use solstice azimuth points, basically where
the sun rises and where the sun sets on a winter solstice or a summer solstice. So what we got is
this, solstice azimuth points on every outer corner of a structure. And this guy, William Romain,
this guy, who's an archaeoastronomy expert, he decided to test this theory and see if it is
happening on all of the temples in the Angkor Wat complex. Could this be expanded from just the one
or two that they know about? So he used Google Maps, literally Google Maps, the most basic tool,
to figure out that basically all of the sites in the Angkor Wat complex, all the major heavy
hitters, including Angkor Wat, Bacong, etc., had one of these templates in the rectangular pattern
for solstice alignments. But as William Romain states, again, no single design scheme was utilized
throughout Angkor. Monumental structures were unique, both in their designs and the way that
each temple incorporated solstice alignments. What was consistent is that the solstice alignments were,
in one way or another, built in. And you can see from the satellite footage that Phnom Bakh's walls
do look like a slightly squeezed square, aka a rectangle. So Phnom Bakh falls into the pattern.
So luckily for us, William Romain did survey Phnom Bakh, and as you can see in this diagram,
the SSR, or summer solstice rising point, is on the northeast corner of Phnom Bakh,
and the summer solstice sunset point, or SSS, is on the northwest corner, and then is reflected by
the winter solstice azimuth points in the southeast and southwest corners of Phnom Bakh.
And the crazy part is, the kicker is, all of these solstice alignments happened within one degree of
which is nuts. I did a little custom google earthing of my own. I made a KLM file using
clod of cardinal points to overlap onto Phnom Bakh. So you can see that not only is the temple complex
aligned north, south, east, west, but the walls around the big linga are too. And it couldn't
possibly get any more interesting or complicated, right? Wrong, because I'm going to show you
how, just on another level, these builders were. If we look here at Banteay Samri temple,
William Romain also mapped this temple on google maps, and we can see that Banteay Samri has its
own winter and summer solstice azimuth alignments at the outer corners of its walls. And if you
draw a diagonal line from the southwest corner of the inner temple wall, and extend that line
to Phnom Bakh, it perfectly intersects the outer southwest corner at Phnom Bakh, which is also
Phnom Bakh's winter solstice azimuth sunset point. And then the line can extend directly to the
center of Phnom Bakh, which would correlate to the middle of the temple structure. It's that like
middle tower structure that I said had all the caved in rock and is basically inaccessible.
I wonder what was inside of that building. Phnom Bakh and Banteay Samri are eight miles or 13
kilometers away from each other, and to maintain accuracy over that distance in a period of time,
you know, Angorian era, there weren't planes, there weren't drones, there wasn't mapping
technology. I mean, the accuracy is truly astounding. And these temples weren't even
built during the same period of time. So Phnom Bakh was built by King Yasovaraman I in the early
10th century, sometime between 890 and 925 AD. And then according to quarry dating of the sandstone
used to build Banteay Samri, it was probably built around 1100 AD. So potentially 200 years
separated these structures, and yet builders were still able to maintain the vision and an extremely
high degree of accuracy between the two locations. He showed that this is happening everywhere,
across the landscape, temples are trading alignments all over the place. And Angkor Wat
is sending out literally hundreds of lines, including to Phnom Bakh. In a 1976 paper,
Astronomy and Cosmology at Angkor Wat, the authors explained that if you were to stand
at the western gate of Angkor Wat on the June solstice, the June summer solstice,
you would have observed the sun rising from behind Phnom Bakh Hill at an azimuth of 65.5 degrees.
And then the alignment works reciprocally. If you were to stand on Phnom Bakh Hill during the
December solstice sunset, you would observe the sun sinking into Angkor Wat. That's wild, right?
So we've answered the first question of whether Phnom Bakh has any planetary alignments, and the
answer is yes, it has plenty. So then moving on to our next question, how did they get all of the
stone up the hill of Phnom Bakh, and where did they source all of the sandstone from? I realize
that I've been holding back the footage of the big linga, so you can see the 10 tons of what was
once solid sandstone in all of its glory. It used to sit upright inside of the hole,
lined with laterite that it now only lies next to. Unfortunately, it's all broken up now. There are
bungee cords and ropes holding all the broken pieces of the linga together, and I'm not going
to get into all of the symbolism. You know, Praveen Mohan can cover most of that, but I just want to
figure out where's the rock from, and how in God's name did they get it up this hill? So let's start
with what we know, which is at the base of Mount Kulin, which is the very spiritually revered holy
mountain north of Angkor Wat, there are a number of sandstone quarries, and it's documented that
the stone used for construction of the Angkorian temples would have originated from these quarries.
Which quarries corresponded to which temples within the greater Angkor Wat complex, that was
unknown. However, there's this Japanese researcher, Uchida, here's the guy, he decided to take
magnetic susceptibility ratings at the quarries and match them with the corresponding magnetic
susceptibility ratings of blocks at the temples. And let me explain to you what magnetic susceptibility
is. Every material on earth in some way responds to a magnetic field. Magnetic susceptibility
is simply how strongly a material gets temporarily magnetized when you put a magnetic field near it.
It's just asking how magnetic friendly is this rock? And by the way, sandstone, despite its
innocuous sounding name, can have a number of potentially very magnetic ingredients in it,
mostly from iron-bearing minerals like magnetite, ilmenite, or hematite, and those are mixed in with
sand grains when the rock was formed millions of years ago. So different spots on Kulin Mountain
will have slightly different iron mineral concentrations, and that difference gets
locked into the rock 150 million years ago, it just depends on what batch you dig up. So the
unique signatures of the sandstone blocks combined with the size of the blocks allowed Uchida to
match up the quarries to the temples, and showed a timeline of when each part of the temple was
constructed. Over time, different quarry zones were opened up, so if you knew the quarry that the stone
came from, you know approximately when the stone was cut. It's essentially as close as we're going
to get to a geological timestamp. So to help you interpret this, a 10 is a really high magnetic
susceptibility, and a zero is low or no magnetic susceptibility, and Phnom Bakh's magnetic susceptibility
on the south platform was a 9.09. That's very high in comparison to all of the other block that was
pulled out even over hundreds of years, and the main structure of Phnom Bakh ranged between five
to seven on the scale, which is still really high. The researchers were able to pinpoint that the
sandstone for constructing Phnom Bakh indeed came from Quarry B at the base of Mount Kulin,
and then they were able to figure out the building timeline, which was that the northern part of the
platform where we saw all of those anomalies that I discussed, the platform underneath that tower,
that's what was built first, and then the south platform, and then the towers on top of the
platform, and then the libraries. And this same study was done again comprehensively on most of
the heavy hitters of the Angkor Wat greater temple complex. So there were a couple things
that I noticed on the more intricately designed temples. One is that Angkor Wat itself, the most
famous temple, has really consistent magnetic susceptibility ratings, always between three to
four SI units, and there's no other temple that uses stone all rated to the same tight band of
magnetism. It's like someone was carefully managing which type of stone to use for this
specific temple of Angkor Wat. Uchida's work clearly shows that there's some sort of pattern
placing certain megalithic blocks in certain places. Did the ancients know about the magnetic
properties of the blocks? It seems to me like they had some sort of inkling, because otherwise
why would they move quarries? They would just keep taking rock out of the quarry that they had
already been working in. And you see that often, they move quarries, there's so many of them
scattered around this area, the question is why move or why maybe more carefully select a quarry
to mine a certain type of rock out of? And again, how did they transport the rock out of the quarries?
I mean, Angkor Wat itself is up to 30 miles away from some of these quarry locations. So here's
one theory posited by the Japanese research team of how the ancient Cambodian builders moved these
blocks. They had uncovered an ancient dry canal way about two meters tall, 20 meters wide, that
begins very close to the Kulin Mountain quarries. But if someone were to fill that canal with water,
they could float blocks downstream and the canal would connect all the way to Angkor Wat itself.
Along the way blocks could have easily been dropped off to Phnom Bakh. Here's a map even
showing of where the quarries are, where the canal starts. There's Phnom Bakh about halfway along the
map and you could, I guess, have easily dropped the blocks off at that point and then just taken
the blocks by, you know, cart or whatever over to Phnom Bakh. But it very well could...
It doesn't answer how the ancients could have lifted the blocks up the hill, but it very well
could answer where the blocks came from and how they transported the blocks 80% of the way there.
As we know, ancient Cambodian builders were masters of utilizing water and moat systems
and canal ways already in their ancient temple building. So to me, this makes sense as one way
they could have been moving material around. I have no answer for you about how the Linga got
there. There's no Linga-sized cut of rock that we can point to at one of these quarries. I'm not
even sure that the Linga is gray yellow sandstone. The rest of the temple is made of gray yellow
sandstone, but the Linga could have actually been made of gray weck. I found out that many Lingas
were constructed using gray weck in Cambodia. It's another type of sandstone, but it's quarried from
eastern Cambodia. And the prevailing theory is that the Cambodian builders would have
slapped this at least like 10 ton piece of rock on a boat from Kedi province in eastern Cambodia,
sent it down the Mekong. But as you can see, the Mekong kind of goes the wrong way. It goes from
eastern Cambodia towards the south. And so the builders would have had to take this weird
tributary up to Than Lai Sap Lake. I don't know. It seems kind of far-fetched for that to be the
transportation mechanism, but I still have no explanation as to how the big Linga ended up on
top of a 700 foot hill slash mountain. But what was interesting is that I ended this research
with finding out that Egyptians actually used gray weck as well for sarcophagi, statues, and
royal monuments. It's what they made this famous statue of Pharaoh Menkaure out of. So I'll leave
you there. I hope you enjoyed this deep dive into Phnom Bakh, and I hope you learned something
just like I did, and I'd love to hear what you think down in the comments.
