Things did NOT go as planned : Refinishing a Mid Century Chest of Drawers

Trash To Treasure
3 followers
Things aren't always as simple as you think...This chest of drawers was supposed to be a quick and easy project, but ended up taking days longer than expected because of the drawers. Specifically, INSIDE the drawers. In this video I'm refinishing a 1960s tall dresser, stripping and scraping the old finish off and staining, toning, and lacquering a new one. Despite the set backs, I love how this came out.
#furnitureflip #refinishing #furniturerestoration #midcenturyfurniture #vintagefurniture #transcendfurnituregallery #midcentury #restoration #diyhome #restoringfurniture #relaxingrestorationvideo #relaxingvideo
Have you ever heard the expression something looks good from far but it's far from good?
This mid-century chest of drawers is the perfect example of that because from standing you know
several feet back it looks pretty good but when you get up close you start to see all of the
imperfections and wear and tear on this piece. Now this is not an exceptional or high-end piece,
this is a fairly common mass-produced piece made by Vicart. It has five drawers and each drawer
needs a little bit of love on the inside and the outside. Having a look at the finish on the top
and sides you know this is a little bit beyond normal wear and tear and without addressing some
of these issues the longevity of the piece could be compromised. So this is a piece that I would
want to refinish. It still has the original sticker on the back you can see this is made in 1968 and
it is very typical of that sort of mediocre quality mid-century furniture and that is of course
pressed wood covered in beautiful walnut veneer. I thought this was going to be a quick and easy
flip that's why I picked it for this video however the drawers had something else in mind and you'll
see what I mean in a minute. Stay tuned. My name is Angie and I refinish furniture. Sometimes I
paint and sometimes I don't but I always do what I can to save old pieces from the trash.
Welcome to my workroom. So first things first I want to welcome everybody to 2025 and my first
flip of the year. A question I get asked fairly often is how I choose my pieces to work on for
these videos and unlike some other furniture channels I don't specifically go find a piece
for a video. I have a storage room full of furniture that I bought way back in 2019 and
2020 when I had a furniture store which is where the name Transcend Furniture Gallery comes from.
But when 2020 happened everything came to a grinding halt here in Nova Scotia and all of
that furniture that I had amassed to work on for my store kind of got put on hold. So what I've
been doing for the last few years is pulling out pieces out of the storage room and that's why you
see a lot of the same things. You guys have seen me redo mid-century dresses before. Even though
they all have elements that are the same each piece does have some unique issues and this piece
is no exception. Someone has mod podged some craft paper into the bottom and I know this is actually
12 by 12 cardstock for making cards and I know this because I used to have this exact paper in
my craft room. The problem is that the stuff can be really hard to take off. Scraping it off is not
an option because with mod podge you apply the mod podge to the drawer bottom then you put your
paper on and then you apply the mod podge over top so it becomes kind of sealed into the drawer.
Heat doesn't work great. It can sometimes work great on normal adhesives but this is a bit of
a different beast. So I decided to try some stripper. It did work a bit but I had to work
at this drawer for almost an hour. I ended up taking the drawer apart. You can see I did a
Because this isn't a drawer where the drawer bottom slides out easily it makes removing this
mod podge stuff so much harder and I only took the drawer apart for this first one. I needed to kind
of see what angles I needed to get at to get this paper off. Thankfully with a little bit more
patience I was able to get it off in the rest of the drawers without having to disassemble and deal
with all that crap. The key it turns out is to let the stripper sit on way longer than you would on
say a finish and because my stripper is usually pretty good I'm used to being able to work really
quickly so I wasn't super patient with this and I should have been. There's a lot of reasons people
will put things in drawers. Sometimes it is to cover up staining. In fact most of the time it's
to cover up stains. Personally I try not to put things that are not easily removable in drawers.
I do occasionally use a drawer liner but it is usually repositionable which means that you can
pretty easily peel it up. Once I had all the paper off I just added a little bit more stripper
to remove the original finish from the inside of the drawer get it all sanded smooth and then put
the drawer back together. Now this to some might look like solid wood. The handle is and the handle
is just tacked on here but this drawer face is actually pressed wood like the rest of it. It
just happens to have walnut veneer on the outside. It's got walnut veneer edge banding around all of
the narrow edges and on the flip side is birch veneer which is what you see on the inside of
the drawer. Every drawer pretty much had some part of a joinery that needed some gluing and I'm
just using a glue syringe to get in this little narrow gap here where the sliding dovetail slides
down into that drawer face and because the drawer face is pressed wood in between those two layers
of veneer it just doesn't hold up as well as if the drawer faces were solid wood or even plywood
with that same sliding dovetail. So a little bit of wood glue is going to stiffen that up.
So in addition to the handles being made of a different wood so is the leg assembly but as you
can see it all looks the same color and manufacturers are able to do this through use of glazes and
toners usually and the toner is simply a tinted lacquer. Sometimes they'll use a little bit of
stain like a dye stain and then a toner on top. I'm going to be using a stain to redo these legs
and the handles later on. The screws and washers and nuts for this leg assembly were a bit rusty
so I just tossed them into a rust bath of some evapo-rust and I'll pull those out in a few hours
and they'll be nice and clean. I'm not going to be taking the entire leg assembly apart but this
is usually the point where I'll go and tighten up any loose screws and a lot of times you will find
a couple that are a little bit loose. Again no super fancy joinery here this is simply pocket
holes and screws maybe a little bit of wood glue. So you got to be careful with leg assemblies
because sometimes on the front here you'll have a panel of whatever veneers on the rest of the
piece and in this case to be walnut but here there's not all of the color you see on the legs
and on the leg assembly it's all done with toners. So as I sand it off you're going to see a very very
pale wood. Most of the time they use something like ash or birch sometimes beech even poplar
I've seen and this is all just to keep cost down. So if you remember in the beginning all of the
drawers were super loose on the tracks and it's because of these plastic pieces at the back of
every single one of them was broken. You can pick these up really cheap on Amazon and speaking of
picking up supplies don't forget that in all of my videos if you go down to the description box below
I have links for the majority of the tools and products I use just to make things easy for you
guys. The drawer bottoms because of the way these are built are sitting in very well there are some
staples here that I'm going to hammer back in but if I left it like this as soon as you put any weight
in the drawer those would kind of pull loose again. So you can see just off to the right there
my Makita crown stapler I'm going to add some fresh staples just to help hold that tight.
Okay so these two top drawers are a bit more complex. It's the same thing with the other
drawers in that the handles and decorative appliques here they're not screwed on they're
actually glued and pinned in so I don't want to take these apart if I don't have to. So in this
case I'm going to be using a stripper to remove the old finish rather than a scraper. This is
going to work out a lot better on these two drawers specifically. Because I opted not to remove
the trim I have to do everything by hand. Now these little decorative pieces on the front here which
also act as the handle on these two drawers these aren't solid wood either they're that same
light wood sandwiched by veneer so on the top the part that we see is walnut veneer and then the
underside you can actually see the little line there as it attaches to the drawer there's another
type of substrate veneer there as well. So what this means is when I go to refinish these top
two drawers I have to stain that light wood just like I did with the handles on the other drawers.
There's a few little chips here that I'm just using some timbermate wood filler to fill. I will
let that dry and then give it a light sanding again before I move forward with the staining and
top coats. So I'm using some water-based stain in the color walnut here on the framing on the
inside. If you remember from the original picture they were toned very dark. I am staining them not
quite as dark but because this is pale wood it would just look kind of strange to have the contrast.
Now sometimes I like the contrast. You'll see me leave a leg assembly like this natural and have
the dark walnut top but in this case that's not what I want to do. I want to kind of recreate
this as close to original as possible. So now that the leg assembly is completely sanded down
and ready for stain I'm going to go ahead and use that same water-based stain. Why am I using
water-based stain as opposed to oil-based? It really allows you to manipulate it and you can
have it as opaque or as translucent as you like and you control this by applying it and then wiping
off as much as you want to. There are some situations where I want this to be super opaque.
Here I'm just kind of testing it. I'm going to wipe it back a little bit and if there's too much
coming off just take my brush add a little bit more until I get it roughly where I want. Now
what's interesting about this stain is it looks very dull and chalky until you put the top coat
on and that's when you get that rich color come through. So what you see as the stain is drying
is not what it's going to look like when you put your top coat on. I am going to be using some toner
on the cabinet as well as the legs so that they kind of blend together well but I still want to
be able to see a bit of that woodgrain so I don't want this to be too opaque. So up on top my finish
is lacquer-based so I'm going to be using a respirator of course and it's going to consist of
three separate products. So this first product I'm using here is called Easy Vinyl Sealer. This is a
product made by Mohawk. This acts a bit like a primer does under paint except in this case it
will be under lacquer. It's going to seal that wood in and allow any subsequent toners and stuff
to kind of be isolated and these handles make spraying so much easier especially if you get a
lot of spraying to do. So I ended up doing three coats of the vinyl sealer then I went in and
touched up a few areas that needed it with the Mohawk graining markers and you'll see me do that
in a little bit. I often get asked why I continue to use these spray cans when I could have a full
spray setup and it's because I don't really have a spot to do this permanently. I also don't use
lacquer that much anymore. It's honestly not my favorite thing to do but some cases call for it
such as here. So for the little bit that I do these cans work fine. So like I said I did three coats
of the vinyl sealer with a very light sanding in between just to knock off any dust nibs and then
here I'm using those graining markers from Mohawk to kind of camouflage this little weird depression
area. It wasn't a chip big enough to put some wood filler in so these markers are great for that.
Once those little touch-ups were done I did one more coat of the vinyl sealer and
here I'm using the toner. Now toner is just a tinted lacquer. This color is called Perfect
Brown and I'm not trying to make this completely opaque obviously. I love the variation in the
grain. You guys see me with Orizoil, the crazy variations. I love that but on a piece like this
when I'm trying to bring it back closer to the original, maybe not identical, I just need these
variations between the heartwood and the sapwood to kind of calm down a little bit. I'm basically
trying to mute them without taking away the beautiful wood grain. Next it was on to the
drawers. Now again I'm using that water-based stain on the handle. Here on the edge banding
in the front I have walnut so I'm not going to be staining that so I'm going to tape it off.
I'm only going to be applying the stain to the handle but then I will be applying the vinyl
sealer and the toner to all of it together to help it kind of mesh. For the drawer boxes themselves
I don't have footage of it but I did use some Howard feed and wax just to kind of freshen up
the drawers a bit. There was a little bit of a groove just behind the handle so I wanted to
tape off that top edge banding so that I could get into the groove but not stain the edge banding
itself. Just like I did on the legs I'm wiping the handle back a little bit until I can see some of
the wood grain but it's not too light and then I'll pull the tape off and repeat what I did on
the outer cabinet to the drawers. Now these top tier drawers, just like it was when it came to
taking the finish off, it's a bit complicated getting the finish on. So I'm using some tape
here to mask off the actual walnut veneer so that I'll be able to stain the lighter color wood.
Once that's stained I'll pull off the tape and repeat the process again with the vinyl sealer,
toner, and lacquer. Aside from typical tools like hammers, glue, that sort of thing, I used circa
1850 stripper, I used Timbermate wood filler in the color walnut, this is the Ceman water-based
stain in the color walnut, Mohawk EZ vinyl sealer, the ultra classic toner in perfect brown, and the
pre-catalyzed satin lacquer as well as their brush tip markers. Now the colors I used for walnut and
they seem to be pretty universal. Light oak, dark perfect brown, burnt cnn honey spice seemed to work
really well on that reddish toned mid-century walnut. And again the Howard feed and wax inside
of the drawers only. And this is a must-have if you're using lacquers, any type of solvents,
oil-based stains, get yourself a respirator. All right so if we rewind a bit and have a look at
what I started with, again this is one of those pieces that from several feet away
looks pretty good until you get up close and see all of the finish damage and gouges and scratches,
repairs that have to be made, chips. I'm really happy with how the first project of 2025 came
out despite the hurdles. As always thank you so much for watching, enjoy the reveal,
and I will see you next time!
