http://squarespace.com/Baumgartner to save 10% off your first purchase of a website or domain. -- Some paintings are clearly masterpieces, but most are somewhere between nice, charming, good, and great. This however does not mean that they deserve any less attention or any less care. And though they may appear to be less than masterpieces, with proper conservation even a humble painting can come alive. -- Support me on Patreon / baumgartnerrestoration
Follow me on Instagram - / baumgartnerrestoration Facebook - / baumgartnerfineartrestoration Julian Baumgartner demonstrates the delicate process of conserving an aged, damaged still life painting. This restoration involves stabilizing the fragile canvas, removing layers of discolored historical varnish and overpaint, and carefully repairing structural tears to unveil the artist's original vision, vibrant colors, and fine details. Summary
How this was made Auto-dubbed Audio tracks for some languages were automatically generated. Learn more Transcript Follow along using the transcript.
Show transcript
Baumgartner Restoration 1.95M subscribers Videos About
AI Generated·May contain errors
This video is brought to you by Squarespace. From websites and online stores, to marketing tools
and analytics, Squarespace is the all-in-one platform to build a beautiful online presence
and run your business. It can be all too easy to dismiss a painting as not very good, mediocre,
or dead. And I suspect some of that has to do with how we receive the painting, in its damaged state.
When all we can see is the yellowed varnish, the surface grime. When the problems, the damage,
present themselves right up front, and distract from any skill or finesse that may be in the
execution of the work. And while it's hard to see past what is, to what could be, and even harder
to know how to get there, that's precisely what's required when making the still life come alive.
Just because something is tired and not presenting well does not mean it's a lost cause.
After all, you're still running that website from 1992. But luckily for you, there's Squarespace.
Their new design intelligence software puts easy at your fingertips,
making it possible to build a beautiful website day over and over again, seeing the same problems
and having to do the same routines. And by utilizing Squarespace's new AI engine, you can
take some of the drudgery out of adding copy to your website, letting the AI enhance it, edit it,
make it more clear, or just give it a little bit of personality. And Squarespace's support doesn't
just stop on the design end. With robust forums, tutorials, videos, and articles, anything and
everything you could ever ask has already been answered. So head over to squarespace.com for a
free trial, and when you're ready to launch, go to squarespace.com slash Baumgartner to save 10%
off your first purchase of a website or domain. The first step in putting this painting back
together is, well, taking it apart. And this begins by removing these tacks and taking this canvas
off of its stretcher. Now, though this painting has been worked on in the past, it doesn't appear
to have ever been removed. We can see this because there's only one set of tacks and tack holes.
And also, look at how brittle this canvas is. It has pulled through where the tacks were. So it
leads me to believe that this is pretty old and has never really been cared for. Now, because I
have to remove all of these tacks at some point, I'm going to do it now instead of waiting till
later when I forget about it and then be frustrated. Also, I'm dirty, so it makes sense to take all
these tacks out now. The next step, once the stretcher has been fully dealt with, is to turn my
attention towards the canvas and these patches that are on the back. Now, this little one just
seems to kind of give up right away when I start to pick at it. It's so brittle and so old that
there's really not much left. And I can take most of this off with my scalpel pretty easily, just
kind of slicing under the canvas. This was adhered with a little bit of wax, which is a
fairly forgiving medium, and the scalpel makes quick work of all of this excess wax that's still
on the back. This larger patch, on the other hand, takes a little bit more work. But luckily, this
adhesive has also failed, and this patch comes off fairly easily. It also appears that this was a
piece of canvas that at one point had been painted green, and some of that green paint has stuck
where the adhesive was to the original canvas. So, with the patch removed, we can see all of that
green, all the adhesive that transferred, and the remnants of that work. We need to get rid of all
of this green and all of this old adhesive. So, back to the scalpel we turn. Because all of this
adhesive has deteriorated and is pretty brittle, it doesn't take much work with the scalpel to break
it up and chip it off. This adhesive didn't have good penetration into the canvas. It's just sitting
on the surface, which is good for us. If it had penetrated deep into the canvas, it would be more
work. And while that's not the end of the world, the fact that they didn't do a good job of gluing
this canvas patch down in the first place means that it is to my benefit, and ultimately to the
client's and the painting's, because removing all of this residue is actually fairly simple and doesn't
take a ton of time. Now, working around the tear is a little bit more delicate and a little bit
more difficult because I don't want to damage any of this canvas, but eventually I can get all of
this residue off. And then it's time to clean up some of this gunk and grime and dust and debris.
And I'll do that with my vacuum until I'm satisfied that it's all clean. It's now at this point that I
will take the painting back to the hot table and I will put it on the little hot table for its first
treatment. And here I'm going to be doing a vapor treatment, which is designed to remove
painter distortions from the canvas. These are distortions like wrinkles, ripples, creases, bumps,
and dents. Things that will catch your eye and catch the raking light and ultimately break the
image as the artist intended it. So by using heat, that's the heated table, and vacuum pressure,
that's what I'm installing right now, some vacuum pump through bag connectors, and a little bit of
moisture, sometimes ambient moisture is enough, sometimes we have to add a little bit of moisture
on a blotter paper. We can soften up this canvas and then using balsa wood brayers and bone folders
we can work the canvas until it's smooth and flat. The assistance of vacuum pressure on the painting
helps, and once it's brought up to temperature the heat will be turned off, the vacuum left on,
and the painting allowed to cool under pressure. This usually takes about an hour to an hour and a
half, then once it's cooled I can transfer it over to the drying table. And this is critically
important because though it is flat now, any residual moisture that's still in the canvas
will start to deform it as it evaporates and cools, and we don't want that. A piece of felt will
protect the surface and compensate for any impasto that's on the painting, and then in between a
couple of sheets of drywall, which will help suck out any more moisture, and one very fancy cinder
block, and the painting is all flat. Once I take it out of that weight it's now time to clean the
painting. I've tested the solvents that I want to use on this painting and determined that there
isn't really any surface grime, just a lot of discolored old varnish. And with the first touch
of the swab we can see just how yellow this natural resin coating is and what lies beneath.
It doesn't take long to start seeing something really lovely underneath all of this old varnish.
Now old varnishes such as this one, which is a damar, which comes from a tree in Southeast Asia,
or shellac, which comes from the lac beetle, or other natural tree resins,
discolor over time. With exposure to ultraviolet light, moisture, oxygen, they change, and over
time they become yellowed, or gray, or milky. And while some people may argue that this adds a
wonderful warmth or patina to the painting, within the context of fine art that's just not correct.
Had the artist wanted this painting to be brown and warm, they would have painted it that way.
And we know that this painting has been worked on because there are patches and areas of retouching
on the front, so to assume that this varnish is the original, well that's just not correct.
And for all of these reasons we've chosen to remove it. Now I've chosen to leave the area
where the signature is for last, because the signature can be more delicate than the rest
of the painting, and by waiting till the end I will have a lot more experience cleaning this
painting and information about the various colors and the surface coating. So that arms me with all
the information I need to tackle one of the most delicate areas of the painting. Now just to the
right of the signature we can see some areas of losses that were repaired, and that whole area
was just overpainted with dark brown paint. Now we can see some of the detail of the table and
molding underneath the marble surface. And as I continue to clean the background, well the color
change is just remarkable. It's hiding behind this thick layer of grime, and we have some really
different colors, really bright colors. But what we're also seeing is no catastrophic areas of
damage, at least not on this half of the painting. Unfortunately we are finding some areas of
overpaint. These areas on the top that are discolored and dark and not coming off, well that's
old overpaint, and we'll have to figure out a way to deal with that later on. Now as I come to the
area with the tear, I'm fully expecting to find lots of overpaint, because we know that this
painting was conserved or worked on, and we can see that overpaint on the surface. Now just how
much overpaint is there remains to be seen. I'm always optimistic that it's very little, but I'm
always surprised to find that it is not. And in this case, well, I am surprised to find that it is not.
The whole area around the tear has just kind of been globbed on with old overpaint, and it's
discolored now, and we're gonna have to deal with removing that later on. But as I continue on, the
rest of the painting looks pretty good, and that's always a big mystery when we remove old varnish,
particularly on a painting that's been worked on in the past. What horrors will we find always
remains a great mystery, and so to find really none, well, that's a win, and I'll take it.
Moving on to some of the fruit is where this painting really starts to come alive. The
brightness of the colors, the delicacy with which the artist applied the paint and modeled these forms
starts to reveal itself. With all of that old varnish removed, we can get a better sense of
the skill of this painter and what they were trying to do with color,
shape, and light. And watching this all unfold, watching this skin be peeled back, well, that's truly exciting.
And as I remove the final remnants of this old varnish from the fruit, we can see it cleanly,
clearly, and it looks much brighter, much more appetizing, and much more alive. And finally,
I will turn my attention to the signature area. With all of that experience, I can tackle this
knowing that the signature is protected, that nothing I'm doing will damage or harm it, and we
can finally see who actually painted this painting. L. Rossier. Though all of the varnish has been
removed from the painting, there is still other stuff that needs to come off. That old overpainting,
and in particular, the wax in the bottom section by the signature. And to remove that wax, I've
chosen to use my hot air pen. Now, the hot air pen is a really great tool because it allows me to
direct a heated, concentrated stream of air in one location. I can change the temperature of the air,
and I can change the volume of air coming out of the pen, so it gives me a lot of granular control.
Here, I just want to soften up and melt the wax enough so that I can lift it off with some cotton
balls. I don't want to scrape this anymore or use any more solvents because this paint is fairly
delicate down here in this brown area, and I don't want to damage it. So by using the hot air pen,
I can remove all of this wax which was poured into these areas of loss to fill it in. Instead
of using a putty, they chose to use wax. Which, again, is not uncommon for historical conservation,
but nothing that we would be using today for many reasons. Among them, it's just not that accurate.
Pouring molten wax into voids gets everywhere, and it's softer than the fill-in medium. So even if
you do create a beautiful texture, it's liable to be damaged. Around the tear, there is also
remnants of wax, and so while I have to remove some of this overpaint, removing the wax now
while I have the hot air pen out is just a nice little step. When it comes to removing overpaint,
there are many ways of doing so. Mechanically, with scalpel, dental tools, or other means.
Or chemically, using gelled solvents or free solvents. And in this case, I'm using a gelled
solvent mixture that we make in the studio. Now, how can this remove the overpaint, but not remove
the original paint, one might be asking? Well, first we have to understand what's actually
happening at a chemical level. The solvent gel diffuses into the top layer of paint. The binder,
the oxidized oil, swells and plasticizes with exposure to those solvents. Internal cohesion
drops, and the paint becomes soft and gelatinous. Then we introduce mechanical action with the swab
and the agitation, which helps lift it away. Now, the original layer of paint is only exposed to
this solvent gel for a short amount of time. The solvents don't actually penetrate deep into that
layer. And that layer has higher crosslink. It's oxidized, and those crosslinks are much stronger.
As the solvent gel sits and dissolves that top layer of paint, it's effectively becoming weaker,
so it's just not going to have the same efficacy. And finally, being a gel reduces the migration.
It keeps it in one place and stops it from spilling out. And this all works because we
have a strong penetrating solvent, a fast acting polar solvent, a balancing solvent,
and a solid delivery system in the gel that all allow us to exploit the fact that the younger,
less crosslinked paint layer will swell and fail faster than the older, more stable one,
if we do it correctly. Now, with the front all addressed, I can turn my attention to the back
and these tears and holes, because we have to fix them. Now, I certainly could line this painting
with big holes and tears. That is a completely appropriate approach. I could also put a big
patch on it, but I wouldn't do that for many reasons. But what I'm going to do here is try
to see if I can use the technique called bridging on this tear. This is a pretty big and gnarly tear.
It goes multiple directions and it wanders. So bridging is maybe not the ideal technique,
but I don't want to line the whole painting. That feels excessive. And I'm willing to take the risk
that this doesn't work out and then I have to line it later on. Because if it does work out,
it's a lighter weight approach, less invasive, and it saves more of the original for posterity.
Now, bridging is a technique whereby strands of canvas, in this case Belgian linen, are cut
and then they're dipped into an adhesive and then laid down perpendicularly across the opening,
much like a butterfly suture. And their job here is to hold this tear flat. We're not really worried
about this tear opening up. The canvas isn't under such tension that that would ever happen.
And the canvas is painted, so it's not really stretchy. Once all of these strands have been
laid down, I can take a little bit more adhesive and paint it on the back. And then once I'm
satisfied, a layer of release film and a piece of felt go down before a weight to press it while it
dries. The release film makes sure that nothing gets stuck, and the felt helps compensate for
the textural difference. Midway through the drying process, I'll remove the release film
and just put the felt down and add some more weight so that some of that residual moisture
that's trapped in the adhesive can evaporate. And then after a day or two, when it's all dry,
looks pretty good. But there is more structural work to complete. And here, because we didn't do
a lining, we need to add tacking edges to this painting because, well, the tacking edges are
missing in parts and incredibly brittle and barely attached in others. And this won't suffice for
when we need to stretch this painting back onto its support. So using a thermoplastic heat-activated
film, I will then bond down this layer of Belgian linen to the tacking edge. The Belgian linen
strip lining gets frayed on one end to soften the transition, or edge, and to create more surface
area for the adhesive to do its work. Once it's ironed, I will chase it with a weight with a piece
of oak attached to the back, effectively what's known as a clapper, and that will help absorb any
of the moisture that's in the canvas that gets turned into steam as the iron presses it. Because
if we don't weight it, it will distort. And remember, we did a lot to make sure that this painting had no
distortions. Once all of the strip lining has been attached, it's time to now marry this painting to
its stretcher support. Even though I removed all of the tacks and nails and other detritus from
the support, I washed it as well to get rid of some of the dust and dirt. And now it's ready to
receive the painting. Now because this painting doesn't have an interleave and it's just a soft
piece of canvas, it's important to start the stretching process from the middle and work
outwards towards the edges. By starting in the middle, I can ensure that the center of the
painting is nice and taut and has good tension. And working towards the corners, I can move any
excess or distortions to those corners where it's much easier to remove them with the keying
process. Once it's all tacked down, I can cut off some of the excess canvas in the corners
and then start tacking down the back where the excess canvas is folded over and then tacked down
with some lighter weight tacks. The corners are folded because it gives a nice gusset,
and then it's time to add the keys. Now the original keys were deteriorated, many of them
lost, and those that remained were just so broken that they weren't worth saving. So I've cut some
new ones to fit the mortises, and I'm inserting them and then hammering them in. This is the
process known as keying, and what it allows me to do is expand this stretcher because these joints
are floating. There's no glue or mechanical fasteners holding this stretcher together.
It's just mortise and tenon. Now adding this tension onto the canvas makes sure that it
stays flat and doesn't distort, and that's precisely what we want. Now because there's
no glue or mechanical fasteners, these keys can become loose over time with humidity changes,
expansion and contraction. They can be lost, or worse, they can fall in between the canvas and
the stretcher bar and create a bulge. So I bind them in place with some fishing line and another
tack. This helps make sure that they don't get lost or create havoc in the future. Now when it
comes to filling in a painting like this with a large loss, I'm going to use this putty, and I've
chosen to leave this kind of open area because it's a little bit too small for an inlay of canvas,
and I want to use the fill-in medium in the same way that somebody building a home would use
plaster lath. You can see the openings here. I'm forcing in this fill-in medium into those voids
through those strands of Belgian linen, the bridging, and then letting it sit,
and this is just the first pass. What's happening here is the fill-in medium penetrating through,
oozing through that gap, and then settling around those strands of Belgian linen,
much like the plaster on a lath wall. It's designed to do that, and when it hardens, it will lock
itself in or key in, and that means that it's not going to crack or flake out as the humidity
changes, and there's expansion and contraction. A second coat and third coat get progressively
thinner until we have a nice smooth coating, and then it's time to remove some of this excess
before it dries, and then ultimately wait for it to dry, and then remove the excess
using cotton swabs and any other approach that gets rid of all of this excess fill-in. We just
want the fill-in where there are losses, not around, not feathered, not blended, but just
where there are losses. Luckily, on a small smooth painting like this, it's pretty easy. It just takes
a couple of passes, but eventually it all comes off, and you can see what's left for the retouching,
and just to check, I'll flip it over, and we can see the keyed-in fill-in. See how it's kind of
oozed and wrapped around those little Belgian linen strands? That's going to hold it in place
really well, but now it's time to prepare the painting for the retouching process, and here
I'm going to be applying what's commonly called an isolation layer. It's to isolate the retouching
from the original, but that's not really the function. What it helps do is eliminate any tiny
little voids in the surface, make the painting smoother, and it also saturates the colors. Right
now, this painting is fairly washed out and dried out. That happens with oil paints, but when we
apply this resin coating, well, just watch how it changes. Watch how everything gets really rich and
vibrant, like a river rock, dry compared to wet, and this is important because this resin effectively
makes the painting varnished, and so now when I apply the final varnish, the colors won't change.
So this is what I want to retouch against, not the washed out and dried version of the painting,
because if I did that when I applied the final varnish, everything would look different. And now
on to retouching. I'm going to get rid of the part that I like the least, the background,
so that I can save the part that I'm looking forward to, the fruit, for last. The background
is usually the hardest. It's really difficult to mix one flat color, particularly this grayish,
brownish, bluish, greenish, pinkish, orangish, I don't know, grayish color, but eventually I will
get it, and that's a combination of lots of slight color changes, so that our eye perceives it as one
unified color. And when that's done, I'll turn my attention to the fruit, and that's something that
I'm actually looking forward to retouch.
So
with all of the retouching now complete, it's time to apply that final varnish.
And here, I'm going to spray it on the surface. We already have that isolation layer sitting on
the painting, saturating the colors, and we just need to unify the sheen. Sometimes the areas of
retouching are a little bit glossier or more matte than the surrounding painting. And also,
this final varnish adds a layer of ultraviolet protection for this paint, and for the retouching,
and for the varnish itself. And that's it. One light pass, and we're done.
And now, this once tired, dark, dreary, and relatively unappetizing still life is anything
but. The colors are rich and saturated, and the fruit looks vibrant and healthy and almost ripe
enough to pick off the canvas and eat. And of course, the damage is all gone. The massive
tear through the fruit and the background has been properly conserved, both structurally
and retouching. And some of the details in this painting, that at first were almost completely
invisible, have now revealed themselves. And it's actually quite a charming little scene.
When the painting arrived, it was kind of lousy, dark, dreary, grimy, and relatively
unappetizing and uninteresting. But now, fully conserved, there is a dynamic range of color and
The fruit is clear, beautifully rendered, and the painting has come alive.