Downstream Processing in Bioprocess Engineering: Cell Disruption and Purification Explained | MooTechie

Down Stream
6 followers
#Biotechnology #Microbiology #DownstreamProcessing
Welcome to MooTechie!
In today’s detailed session, we explore Downstream Processing — the critical stage of bioprocessing where valuable products are extracted, purified, and recovered after fermentation.
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a comprehensive overview of downstream processing in bioprocessing, focusing on the extraction and purification of products from fermentation broths. It details the factors influencing process selection, strategies for cell disruption, various methods for separating soluble products, and the final stages of crystallization and drying to achieve high purity.
Hello everyone and welcome to our channel Mooteki.
A special welcome to all the dairy technologists and students with us today.
We're going to explore a crucial phase in bioprocessing, downstream processing.
Now let's define downstream processing. Now that the organism has been grown and
the product produced, how do we actually get the product?
Possibly the most expensive part of the entire process is the extraction and
purification of the product. We must separate the product from cells,
The choice of a downstream process is based on several factors.
These include the location of the product in the organism whether it's
intracellular or extracellular. The concentration of the product in the
growth medium is also key. We must consider the physical and chemical
properties of the product itself, its intended use and the minimal
standard of purity required. The biohazard level of the medium, cells
or product is important as are the specific impurities present
and the market price of the product. Moving on, we will see that we can
actually modify the upstream processes to make downstream purification easier.
We can select organisms that do not produce undesirable pigments or
metabolites. We can modify fermentation conditions
so that undesirables are not produced. Precise timing of the harvest is crucial.
We can control pH and temperature after harvesting.
Adding flocculating agents can help and we can choose antifoams that don't cause
purification problems. Another strategy is using lytic enzymes
to aid in cell wall disruption. Next, we explore the overall strategy for
recovery and purification of bioproducts. A general flowchart starts with the
fermenter. The contents are separated into cells and
supernatant. For intracellular products, cell
disruption is needed followed by recovery and purification.
For products in the supernatant, we move directly to recovery and purification.
The final steps for both paths are crystallization and drying.
Now let's look at cell disruption. Disruption means the cell envelope is
physically broken, releasing all intracellular components
into the surrounding medium. The methods are broadly classified as
mechanical and non-mechanical. One mechanical method is ultrasonication
using sonicators. It's suitable for bacteria, viruses and
spores in lab-scale suspensions. An electronic generator creates
ultrasonic waves which cause a mechanical oscillation via a titanium
probe immersed in the cell suspension. Another
mechanical method is milling which is suitable for continuous operation.
It's used for algae, bacteria and fungi on a large scale,
handling up to 2000 kilograms per hour and can process both liquid and solid
feeds. The principle involves a grinding chamber
about 80 percent filled with beads. A shaft with designed discs or impellers
rotates at high speeds inside the chamber.
The high shearing and impact forces from the beads break the cell walls.
Ball milling is another mechanical method used for solids like frozen cell
paste or cells attached to a solid matrix. This is also applicable on a
large scale. Homogenization is a mechanical method for
suspensions on a large scale. It involves pumping a slurry at very
high pressure up to 1500 bar through a restricted orifice valve.
The cells disrupt due to high liquid shear in the orifice and the sudden
pressure drop upon discharge to atmospheric pressure.
Examples include the French press and Golan Manton homogenizers for lab scale
and the Rani high pressure homogenizer for large scale. A diagram illustrates
the high pressure orifice through which the slurry is forced. Now
let's examine non-mechanical disruption methods.
One way is using chemicals to solubilize components in the cell walls to release
the product. The requirements are that the products
must be insensitive to the chemicals used and the chemicals must be easily
separable afterwards. Types of chemicals include surfactants
like sodium sulfonate and sodium dodecyl sulfate to solubilize lipids,
alkali like sodium hydroxide which is harsher and organic solvents like
toluene which penetrate lipids and swell the
cells. For example, bacteria can be treated with acetone followed by sodium
dodecyl sulfate to extract cellular proteins.
Another non-mechanical method uses enzymes to lyse cell walls gently to
release the product. This is gentle but can be high cost. An
example is using lysozyme, a carbohydrase to lyse the cell walls of
bacteria. Osmotic shock is another technique.
Osmosis is the transport of water molecules from a high concentration
region to a low concentration region when separated by a selective membrane.
Water passes through the membrane more easily than other components.
When cells are placed into pure water they swell and can burst due to the
osmotic flow of water into them. Cell disruption faces several challenges.
There is a risk of heat denaturation damaging the product.
Oxidation of the product can occur. Furthermore, disruption leads to the
unhindered release of all intracellular products
creating a complex mixture to separate. Returning to the purification strategy
flowchart, it shows the fermenter contents
undergoing solid-liquid separation. The cells can be routed for cell
disruption which produces cell debris that also needs purification. The
supernatant and the products from cell disruption
then move to the purification stage followed by crystallization and drying.
Now let's look at methods for separating soluble products.
Liquid-liquid extraction relies on the difference in a product's solubility in
two immiscible liquids. It's applicable for separating
inhibitory fermentation products like ethanol and acetone butanol from broth
and for antibiotics using solvents like amyl acetate.
Requirements for liquid extractants are that they be non-toxic,
selective, inexpensive, immiscible with the fermentation broth
and have a high distribution coefficient kd. kd equals yl divided by xh where yl
and xh are the concentrations of the solute in the light organic phase and
the heavy fermentation broth phase respectively.
For example, penicillin is extracted from broth using isomyl acetate where kd can
reach 50. When fermentation broth contains more
than one component, the selectivity coefficient
beta becomes important. Beta underscore i equals k underscore d
underscore i divided by k underscore d underscore j
where k underscore d underscore i and k underscore d underscore j
are the distribution coefficients of components i and j.
The higher the value of beta underscore i is, the easier it is to separate i from
jph also has an effect. For instance, at low ph below 4, penicillin
can be separated from impurities like acetic acid by moving to the organic
amyl acetate phase. Precipitation is another method. It
reduces the product's solubility in the fermentation broth by adding chemicals.
This is applicable for separating proteins or antibiotics from the broth.
Methods of precipitation include salting out by adding inorganic salts like
ammonium sulfate or sodium sulfate to increase
ionic strength. Factors like ph and temperature affect this.
For example, the solubility of hemoglobin decreases with increasing
amounts of ammonium sulfate. The added salts interact more strongly
with water causing the proteins to precipitate.
This method is inexpensive. Another method is isoelectric precipitation
where a protein is precipitated at its isoelectric point.
For example, the isoelectric point of cytochrome c
is 5.6. Adsorption involves adsorbing the soluble product from the fermentation
broth onto solids. Approaches include physical adsorption
using activated carbon and ion exchange using resins like a
carboxylic acid cation exchange resin for recovering streptomycin.
Adsorption capacity is the mass of solute adsorbed
per unit mass of adsorbent. It is affected by properties of the adsorbent
like its functional groups and surface properties and by properties of the
solution like solute type, pH, ionic strength and
temperature. This method relies on the difference in
affinity of the product for the solid and liquid phases
and is applicable for soluble products from dilute fermentations.
Membrane separation is another key technique. Microfiltration uses membranes
with pore sizes from 0.1 to 10 micrometers to separate bacterial and
yeast cells. Ultrafiltration is for macromolecules
with molecular weights between 2,000 and 500,000.
Dialysis removes low molecular weight solutes like organic acids and inorganic
ions. Reverse osmosis applies pressure to dry
water from a low to high concentration region and is for molecules with
molecular weights less than 300. The common features of these methods are
the use of a membrane and pressure as the driving force.
Chromatography separates solutes based on their different rates of movement
through a column packed with adsorbent material.
The principles involve a stationary phase which can be an adsorbent,
ion exchange resin, porous solid or gel and a mobile phase
which is the solution containing the solutes and the eluent that carries it
through the stationary phase. It is applicable for separating proteins
and organic compounds. In the method, a solution containing
several solutes is injected into the column followed by the eluent.
Each solute moves at a rate proportional to its relative affinity for the
stationary phase and comes out as a separated band at the
end of the column. A diagram from M. Schuller's bioprocess
engineering illustrates this, showing different solute bands
separating. The mechanism of chromatography is
similar to adsorption as it involves solute-adsorbent interaction.
However, it is different because chromatography is based on the different
rate of movement of the solute in the column
while adsorption is based on capturing one solute on the adsorbent to separate
it from others. Electrophoresis separates charged
solutes based on their specific migration rates in an electrical field.
Positively charged solutes are attracted to the cathode and negatively charged
solutes are attracted to the anode. Factors affecting separation include
electric field strength, the electric charge of the solutes, the
viscosity of the liquid and the particle size.
It is applicable for protein separation. A diagram of protein electrophoresis
shows a gel with bands corresponding to proteins of different molecular weights
labeled in kilodaltons such as 250, 160 down to 25. Returning to the final
stages in the purification strategy we have crystallization and drying.
Crystallization is often the last step in producing highly purified products
like antibiotics. It involves creating a super saturated
solution often at low temperatures and then separating the crystals by
filtration. Drying is used to remove solvent from
the purified wet product whether it's a crystal or a dissolved solute.
Vacuum tray dryers are used for pharmaceutical products.
Freeze drying or lyophilization works by sublimation and is used for antibiotics,
enzymes and bacteria. Spray drying is used for heat sensitive
materials. Finally let's summarize separation and
purification. For liquid solid separation we have
filtration methods like rotary vacuum drum filters
and micro slash ultra filtration and centrifugation.
For cell disruption EE we have mechanical methods like ultrasonication
milling and homogenization and non-mechanical methods like chemicals
enzymes and osmotic shock. For the separation of soluble products
we have liquid liquid extraction precipitation adsorption membrane
separation like ultrafiltration and reverse osmosis
chromatography and electrophoresis. The process concludes with crystallization
and drying. Thank you for joining this detailed
session on downstream processing. We've covered the essential steps and
methods for recovering and purifying valuable products from fermentation
from initial cell disruption to final crystallization and drying.
Understanding this process is key to bringing biotechnological products to
market. Thank you. See you in the next class.
