🐝 Honeycomb Soap Making (How to Use Bubble Wrap) 🍯

🐝 Honeycomb Soap Making (How to Use Bubble Wrap) 🍯

This video was made by recycling used bubble wrap and discarded cardboard boxes.
It’s a tutorial on how to make honeycomb soap.

MP soap can be used immediately after making without having to wait long.
Whenever I want to change my mood, I enjoy making a few soaps with designs I like and using them myself.

I tried the honeycomb honey soap while editing this video.
Because it contains a lot of honey, it is slightly more elastic than other soaps.
It feels very moisturizing.

Pumpkin powder and cocoa powder can be premixed with glycerin to help with moisturizing.
There are no lumps, so it’s very easy to work with.

When I added the milk & honey fragrance, it felt like washing my face with a honey-filled honeycomb while taking a bath.

It’s not difficult to make, but here are some important tips that beginners can easily miss.

Pour as thinly as possible into the bubble wrap mold so the honeycomb pattern appears beautifully.
Remove the bubble wrap from the honeycomb soap only after it has completely hardened, or place it in the freezer for a while first.
Spraying alcohol (ethanol) is essential when making layered soap.
After pouring the soap solution, spray alcohol to remove air bubbles.
To help layers adhere well, spray again right before pouring the next layer.
If you skip spraying, the layers may separate later.
When pouring the honey soap over the white honeycomb model, the soap must never be too hot.
The white honeycomb can melt, so pour it while it is warm (around 50°C / 122°F).
Placement is important for the white honeycomb pieces in the center and on top.
If you completely fill the mold with honey soap and place the honeycomb pieces while the soap is still deeply liquid, they will sink to the bottom.
So don’t forget to divide the process into several stages while working.
Leave a small amount of the honey soap mixture, then chop it finely and lightly sprinkle it on top at the end.
This makes the honeycomb texture look more realistic.

Thank you for watching the video ~ 😍💖

Required Ingredients – Recipe

1L rectangular flat carton box (sterile cartons recommended), a box or container larger than the carton,
bubble wrap, spoon, cup, alcohol spray bottle, sharp tool (awl)

Clear Soap Base 900g
White Soap Base 150g
Milk & Honey Fragrance 7ml
Honey 15g
Pumpkin Powder 4g
Cocoa Powder 1g
Glycerin 23g

0:00 Introduction
0:21 Cutting and melting the soap base
0:59 Preparing the powders
1:28 Building the honeycomb
2:08 Making the mold with a cardboard box and creating the honeycomb model
2:34 Adding honey and preparing the soap mixture
3:03 Starting to expand
3:59 Cutting after hardening