How Do Tour de France Riders Climb So Fast?

World Formula 1 Racing
14 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis video explains the multifaceted reasons why Tour de France professionals can climb brutal mountains at speeds averaging 25 km/h. While high power-to-weight ratios are the primary driver, the secret to their performance lies in a combination of drafting, gear management, pacing, nutrition, and advanced biomechanical adjustments.
How did Tour de France riders climb up mountains so fast? The best pros can average 25 kilometers
per hour or 15 miles per hour up some of the most brutal climbs in the world. Is it just that they
are fitter or is there more to it? Before we get onto the reasons why they're so fast, one of which
I think is really going to surprise you, we wanted to show you exactly how fast they are.
We are midway up the Côte de la Madone in southern France. This is me riding at the
power I can sustain for the entire 13-kilometer climb, which is about 280 watts. Then this is me
riding at the speed that three-time Tour de France champion Tadej Pogacar was riding here
when he set the record on this climb. It's quite a big difference.
The biggest determinant in climbing speed is the power you produce versus the weight of you and
your equipment. The more powerful you are and or the lighter you are, the faster you will go.
The best climbers in the Tour de France have a very high sustainable power
and they don't weigh very much either. Currently, a power-to-weight of almost
seven watts per kilo of body weight is needed to stick with the very best in the key mountains.
They don't do it all on their own though. Even on climbs, there will be a benefit to
sheltering from the air behind teammates or other riders. For example, the record speed at the
Côte de Galibier held by Pogacar is 27 kilometers per hour despite the 5.5% average gradients.
At that speed, drafting is still going to offer a significant power saving
versus riding into the wind yourself.
Tour de France riders will also pay close attention to their gears.
Most will maintain a high cadence of over 90 revolutions per minute.
This allows them to respond easier to any accelerations in a group,
but more importantly, it reduces the fatigue to the muscles. The power is the same but
torque is reduced. It's like doing more sets but with less weight in the gym.
Correct pacing is another vital tool in mountains. Most amateurs will start climbs way too fast and
fade later, whereas the best Tour de France riders will stay within their limits,
allowing them to attack later on. They often use power meters to gauge their efforts,
and they know when to go fast and when to take it easy.
They also have an incredible ability to recover from very hard efforts whilst still climbing.
On shorter climbs, positioning going into them can make a big difference as to how fast you go
up them. Start at or near the front, and you'll be able to carry your momentum from the flat.
Start too far back, and you might well find yourself having to slow down or even
stop as the peloton tries to filter into a narrower road.
Fueling strategy is a big consideration for Tour de France cyclists. They will consume up to 150
grams of carbohydrates per hour, and they've trained their bodies to be able to absorb and
use it. This allows them to produce a similar amount of power at the end of a long grueling
stage as they can when they're fresh at the start. Those are the key points, but is there
anything less obvious that Tour de France riders are using to climb faster? Yes, biomechanics.
Some riders, including Tadej Pogacar, are now pushing their saddle further forwards and tilting
it slightly down so that their knees are vertically over the pedals when they're
climbing gradients over 6%. This can be described as pre-rotating, effectively meaning that their
saddle is horizontal whilst the bike is angled upwards with the gradient. The theory goes that
you get a better transfer of power in that position whilst reducing pressure behind the
bottom bracket. It might not work for everyone, but it's certainly something that riders have
been experimenting with in recent times. There you have it. The key ingredients for
Tour de France riders to go that fast on mountains is a high sustainable power
and a reasonably low weight. However, there is more that goes into it than that. Not every
rider with the same power-to-weight ratio is able to go up Tour de France mountains
at the same speed. Hope you've enjoyed this video. If you have, please click on the thumbs
up button just down below. If you're yet to subscribe to GCN, there's a button down below
for that too.
