My favorite mixed media technique 🎨 ❤️ How I use watercolor + oil paint TOGETHER!

G-Art
6 followers
14 Video Views·May 27, 2026
My favorite mixed media technique 🎨 ❤️ How I use watercolor + oil paint TOGETHER!
Music:
Amarante - Someone Else (Instrumantal)
Amarante - Lost (Instrumantal)
AI Generated·May contain errors
Video Summary
AI GeneratedThis video demonstrates a mixed media technique that combines watercolor and oil paints, two mediums typically incompatible on the same surface. By using specific primers and sealants, the artist shows how to layer these paints on wood panels and paper to create textured, vibrant artwork while maintaining the archival quality of the piece.
I'm going to show you my favorite mixed media technique combining two opposite mediums that
are really not meant to be used on the same surface. Oil paints and watercolor. I'll be
demonstrating this on wood panels as well as paper. It's actually super easy. I recently
discovered a product called watercolor ground. It's a special absorbent primer that's similar
to gesso but it can make almost any surface suitable for watercolor. Here I'm priming some
birch wood panels with this watercolor ground. This process actually makes it possible to use
watercolors on wood panels, which I didn't even know was a thing you could do. I thought you just
had to use paper and that's your only option, but you can actually use watercolors on other
surfaces too as long as you prime it with some watercolor ground. I did three layers of this
and made sure they were dry in between. Once you've primed your panel, make sure to give it
at least a day, like 24 hours, to fully cure before applying paint. I started with a pencil
sketch first. This painting was actually a portrait of the beautiful Bethany Sciatola
and once my pencil sketch was complete, I then used a little bit of acrylic ink to create an
undertone for the face. Then I used watercolors for everything else, like mostly the background.
The goal for this piece was to use watercolor as a sort of underpainting and create interesting
drips and textures throughout the background that I would then leave exposed. Once I was happy
with my watercolors, I waited a few hours for it to dry and the next part is super important. Do not
skip this step under any circumstances, especially if you're using this technique on paper. This is
acrylic matte medium, which I will use to apply a few layers to the surface. Matte medium has many
uses, but my favorite is using it as a sealant for mixed media art involving oils. It dries
transparently, which allows me to leave certain parts of the watercolor textures exposed. I did
about three layers of acrylic matte medium here. After letting it completely dry, you can then go
in with oil paint. Every kind of paint has a unique quality to it that is different from the others.
With oils, I love the buttery texture of the paint, how smoothly it blends, and the fact that
the paint remains workable for a long time. It also has very vibrant colors and generally it's
just incredibly versatile so you can explore so many different techniques and ways of painting.
I've been painting with oils for almost two decades now and I feel like I still haven't
really scratched the surface. There's so much to learn and do and I also haven't gotten bored of
oils in nearly two decades. The possibilities are endless, which is why it's my primary medium.
Using acrylic matte medium as the buffer between the watercolor layer underneath allows me to use
oils on top of watercolors without disturbing that layer underneath. It also creates a more
favorable surface to place the oils on top of. I used the same method for another painting of a
I did the sketch first and then toning the panel with watercolor, creating some interesting
textures, just letting the watercolors do their thing. They tend to dry a little bit lighter than
when you first apply them, so just keep that in mind. It usually takes me a few layers until I'm
happy with the colors. Sometimes I also like to sprinkle a little bit of salt on the surface while
the watercolors are still wet. The salt absorbs some water and pigment and it can create an
speckled kind of texture. Obviously, once everything dries, just remove the salt
after that. You don't want to leave that on the surface. Again, once the surface is fully dry,
I applied the matte medium for a few layers. Once the matte medium dried, I then went in with oils.
For this crow painting, I have a real-time demonstration available. It's two separate
videos for a total of one hour and 42 minutes long. I will link that in the description and
you can also see my real-time painting demonstration library on my website,
linadonyastore.com slash tutorials. I'm still very much experimenting with this process. It's
very new to me. In the past, I was kind of rigid with oil painting in the sense that
the whole painting has to be done in oil and usually I still paint that way. My go-to method
with most of my art usually does involve oil paint covering the entirety of the painting.
I still enjoy painting that way and likely always will, but the thing about art is that the
possibilities are endless and mixed media can be really fun to experiment with alongside your
normal process. This technique also works really well on watercolor paper and I'll show you an
example in my sketchbook. This is actually where I first started experimenting with this technique.
I have this Hanamule watercolor sketchbook that I've been using for gouache, watercolors, and
also oils. I recently went to the tulip fields in Mount Vernon, Washington and I found a lot
of inspiration there so I wanted to do a quick little tulip sketchbook spread. Once again,
I did a graphite sketch of some of the tulips I wanted to paint and then I added the watercolor.
After the watercolor fully dried, I primed the pages with matte medium. It's even more
important that you use matte medium if you're planning to do this with paper because the oils
from the oil paint will soak into the paper, it will absorb, it will seep into the back side of
the paper and create these gross looking oil stains. It won't be archival because the oils
will just eat the paper over time, decreasing the longevity of the art, so make sure to do
a few layers of that acrylic matte medium to protect the watercolor paper and give the oils
something else to bind to instead of the paper. Once the matte medium is fully dry, you can go
ahead with your oil paints. Whenever I use oils in my sketchbook, I like to use either galkyd or
galkyd light as the medium to mix with my paints. Those are alkyd resin mediums and they decrease
the drying time significantly, so you should be able to close the sketchbook in about two days
or so depending on how thick your layers are in oil. Obviously give it a quick touch test before
you close your sketchbook, but since I work with thin layers, it usually doesn't take more than
two days for me to be able to close my sketchbook. That's really the only downside of using oils in a
sketchbook, you just need to wait a while before being able to close it, but galkyd makes it so
you don't have to wait nearly as long as you might think. So that's basically the process. I'm really
enjoying experimenting with this technique, so I thought I would share this for anyone else that
might be interested. I've always enjoyed the idea of breaking some rules in art and I think this one
breaks quite a few big ones, but we're doing it in a very controlled, careful, and intentional way.
Well hopefully this video gave you a little bit of inspiration to experiment with your art.
I hope to see you in my next video and I'm wishing you a beautiful day. Bye everyone!
