I made a forest vivarium for dairy cow isopods

Mini World Craft
6 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThe video demonstrates the process of building a naturalistic, custom enclosure for orange dairy cow isopods. The creator focuses on creating a forest-like environment to encourage the isopods to thrive and breed, detailing every step from glass cutting and framing to substrate mixing and planting.
When I mention the word roly-poly the first thing that probably comes to your mind is the small
little dark gray ones you used to find outside all the time as a kid. But what if I told you
that there are thousands of exotic species of roly-polies otherwise known as isopods.
Now as mentioned there's the classic roly-poly, pill bug, whatever you used to call them,
that you'd find outside all the time as a kid. Then there are other species that are more exotic
such as panda king isopods, dairy cow isopods, and the ever so popular rubber ducky isopod.
The focus of today's video will be setting up enclosure for my orange dairy cow isopods.
Now these aren't dairy cow isopods except they are the orange variety so they're the same except
orange. But today I will be setting up a naturalistic enclosure for them. Now I got these
guys at the reptile expo a couple of weeks ago if you want a little more information on that
definitely go check out that video. But today I'm going to try and make the ultimate dairy cow
isopod setup. Now in total I did get 30 of them and I would like for them to breed so I'm going
to make the enclosure rather large. And speaking of enclosure that's the first thing that I need
to do. I don't actually have one, I need to build one, so the first thing we need to do
is go to the garage. Okay we're here in the garage. And now that we're in the garage it's
time to start the project. So like I said this is going to be basically the same as the mantis
enclosures so it'll follow basically the same process. You know I'll start by cutting the
panes of glass and then silicone those together and then I'll go in and you know add all the rest
of the good stuff. But that is the first thing that I'm going to do today is start by cutting
this glass. So let's cut this glass. Starting off with a pane of glass I use a ruler as well as a
tape measure to get the size that I want. I then cut along that line and snap off the excess. I
then repeat this process a couple times and once I have all the pieces I assemble them with a little
bit of painting tape. With the tank assembled the last thing I'll do is run a bead of silicone along
the seams to help hold things together. Okay so now that we're at this point tank's looking pretty
good. I'm pretty happy with the size. It's honestly a little bit bigger than I had originally intended
to do but that's completely fine. The whole idea is for them to you know thrive and even breed in
there so I'm hoping that I just give them a little extra room and eventually they'll fill
up the space. But the next thing that I need to do similar to how I do the mantis enclosures is I need
to put the wood frame on and to do that I have these wooden dowels. The first thing I do is take
the measurements that I need for the tank. I then transfer those measurements onto a wooden dowel
and cut it with a saw. I then repeat this process for every piece that I need measuring and cutting
before taking a piece that's a bit thicker to a table saw so I can run it through it and thin it
down a bit. Once I have all the pieces cut I use a little bit of sandpaper to smooth them out a bit
and then apply my stain. I repeat this process for each individual piece making sure to sand
them smooth and cover the entire thing with stain. Once all the pieces have had an adequate amount
of time to dry I hit them with a coat of some clear spray paint to help protect them from water
as well as give them a little bit of a shine. Then once that's dry I use a little bit of epoxy and
start applying it to each piece and then sticking it to the tank. I repeat this process for every
piece until the whole tank is covered. So the enclosure is now done. I really really love the
way this turned out and this will be the perfect canvas for us to continue making this setup.
So the next thing that we need to take care of is the background. Now usually for a background
like this I would get some XPS foam and do the dry lock technique but that's not really
the feel that I want for this one. I want this to really really feel like a type of forest
almost like a tree has fallen down in a forest and it's being taken over by nature because
realistically this is where isopods would live. Also for a shorter longer tank like this that
whole style will just work so much better. So instead of doing the dry lock technique what I'm
going to do is I have a bunch of cork flats and I'm going to strategically place those over the
background as well as maybe a few rocks and other things and I'm going to create my own background
just out of natural materials that I have lying around. So now that I have a background layout
that I'm happy with the next thing I'm actually going to do is start scaping this thing and the
reason for that is because like I've done in the past I really want my scapes to blend in with my
background. I want it to feel like one cohesive piece. I want it all to like blend and just
make it all feel like one. In my opinion this really helps just make the project feel more
natural and it looks better. Starting off with a couple different pieces of driftwood I just
start scaping. Now there is a bit of a process and a plan that I wanted for this. Like I mentioned I
wanted this scape to kind of feel like a fallen tree or branch or something that's kind of been
taken over by nature but keeping that in mind I was able to come up with something that I thought
looked pretty good. In order to lock everything in place though I will have to remove the scape first
so that's what I did. I started by taking out all the pieces and then hot gluing a few of the
background pieces to the piece of foam that way they'll stay there and they won't get moved. I
then repeated this process for every piece including a couple of the rocks before taking
this outside to the garage and gluing a couple pieces of foam to the side so that I could get
an area to reassemble the scape. Once I had the scape reassembled I started using some expanding
foam to help lock everything in place. Now in doing so I'm not using a lot of foam just enough
to fill all the little gaps. I didn't want this to be too crazy I just want to cover up all the
little pink areas so nothing too dramatic. As for some of the smaller bits of the scape I decided
just to use some super glue to attach them. Then after allowing the foam to cure I came back and
started picking and peeling some of the pieces away to remove that unnatural texture. Once that
was complete I applied super glue all over the foam and sprinkled a little bit of rock dust and
smaller pieces of rock over that. I repeated this process over the entire course of the rocky area
as well as adding a few smaller rocks just to help bring in a little bit more of that detail.
Then I did the same process except with coco fiber for the areas where the scape was as well as for
the cork bark and I think it turned out great. So now the background has been complete I really
really love the way it turned out I think I definitely could have done better in terms of
like blending a few things and maybe making it look a little more seamless but the technique
is there and that's what matters because then I can apply this technique to other tanks I can
work on it and improve it all that stuff. So the next thing we need to do to make this thing
functional is add a false bottom and in order to add a false bottom I'll start with a bit of
leaka. Leaka is a great medium for a false bottom as it takes up a lot of space and absorbs water.
Anyway I'll pour that into the tank in a substantial amount before flattening and leveling
it out. Then using a piece of mesh I'll set the tank on top of that and cut around the edges.
Leaving a bit of a lip around the edges is a good thing as it allows you to fold the pieces
of the mesh up against the sides of the tank to further prevent substrate from getting through.
As you can also see I have a few anchor points for the piece of wood that I unfortunately wasn't
able to get the mesh under so I just cut a little slit and worked around that. So now that the false
bottom has been complete the next thing I need to move on to is the substrate. Now for my substrate
I use a modified ABG mix. A normal ABG mix would also work as well but the mixture that I use
consists of three part cocoa fiber, two part reptile bark, one part sand, and a half a part
of charcoal. After adding all the ingredients I thoroughly mix everything together to get a
consistent mix. After thoroughly mixing all the ingredients I start adding it to the bottom of
the tank. Now in doing so I am sloping it up towards the back to create depth however for
this specific build I also wanted multiple layers so I filled in the area behind the piece of wood
and built that up a bit. I tried to blend the substrate with the wood as best I could filling
any little gaps and areas that will help blend it together. With the substrate in place it's finally
time to move on to the plants. Now similar to how I do with my mantises before actually adding
the plants I'm going to prep them. The way that I prep my plants is I start by removing each plant
from its pot and breaking up all the soil from the roots or at least as much as I can. After that I
take them to a source of water like outside or a sink and I wash off any of that remaining soil.
Then just to further ensure that I get off as much as possible and remove any potential pesticides
I soak them in warm dechlorinated water for about 10 to 15 minutes. This will not only ensure that
the plants are properly cleaned but also help mitigate risk of pesticides and other harmful
pests. So now that the plants are prepped I started the planting by adding a rabbit's foot
fern towards the top right. Ferns are commonly found in forests and again I wanted this to have
forest feel so this is the perfect place to start. After that I ended up adding a dracaena
towards the bottom left. I really love these plants and they're a great hardy species for
enclosures like this. I then added a couple more ferns as well as a few cuttings of ivies and ficus
to finish things up. So now that the planting is finished it's finally time to finish this thing up
and what I mean by that is I have a bunch of smaller details to add such as leaf litter I've
even got some moss that I'm going to throw in there a little bit of ficus just stuff like that
and then of course getting the actual isopods in there. But I'm just going to go ahead and
add the final details and we're going to get this thing finished. So let's get this thing finished.
Thank you guys for watching this video. I really appreciate you sticking around until the end.
This was probably one of the most trust the process projects that I've worked on in a long
time. I scrapped the background like twice I tried like three different techniques I didn't show it
because it was a whole process and it was really frustrating but in the end honestly this has been
and probably is my favorite enclosure that I have made to date. I don't know what about it it just
everything blends really well it really captured that forest vibe that I want and the isopods seem
to be enjoying it. Over the past three or four days I've had it set up I did lose a couple of
them maybe five or six I'm really not sure as to why. I've checked temperature and humidity and all
the parameters and stuff and everything's fine so if you guys have any ideas as to why that could be
whether it's just stress or whatever I'd be curious to know. But other than that everything is doing
great and I'm really really loving this enclosure. I definitely want to do more work with isopods
especially rubber duckies sometime down the line but those are a bit more on the expensive side
and harder to care for so we'll see about that. But that's going to do it for this week. Again
thank you guys for sticking around till the end I really hope you enjoyed this video. Don't forget
to hit that subscribe button and leave a like if you enjoyed it and I'll see you guys next week.
