Rustic DIY Patriotic Decor

Holiday Decorations
97 followers
14 Video Views·May 17, 2026
It's our Nation's 250th year, lets celebrate by creating some rustic style DIY Patriotic decor. I made 4 crafts for you today.
AI Generated·May contain errors
So hey everyone, welcome to Small Farm Living.
My name's Julie, and we are going to be doing
some rustic patriotic DIYs.
Now, the first one I have up for you today,
I got this little frame at the Dollar Tree.
All these little pieces, I used this template
to cut out a piece of cardboard for my project.
We are gonna be putting the glass in the back
because I need to actually use the cardboard face.
And I'm gonna paint this frame black.
Now, this frame, the little wood beaded section
all around it, is kind of like a raw wood
and what I didn't realize before I got started painting this
is that all of the edges have a finish on them.
So as I was working my way around this frame
with the black paint, I was noticing that the black
was kind of pulling away from the wood on the edges.
So I finished painting the whole thing.
And as you can see, I'm gonna lift it up here,
you can see how the little streaking is happening
and it goes down into the little groove
by the beads as well, which was really frustrating.
So I decided I'm just gonna take a wet paper towel
and I am going to rub the black paint
off of the frame portion that has the finish on it.
And it did leave a little bit of coloring on it,
which was okay, but I mean, look how messy my fingers got.
And I apologize for my hands anyway,
because as you can tell from my name of my channel,
I have a small flower and vegetable farm
and I am in full swing planting, transplanting,
getting my fields ready.
So back to the project, I put all of the pieces
back into the frame and got them tightened down
and turned it over.
And I am going to be constructing a flag
onto the face of this.
And I'm gonna use little ribbon roses.
Now I've had these ribbon roses forever,
I got them from Wish, I looked up,
I was wondering if Wish was still a thing
and I looked and they still are,
but most people go to Timu now.
But I had cut these off from a different project
that I had done, but there still is a little bit on there.
So I'm just gonna take my scissors
and cut the little wire off flush
so that when I go to glue these to the cardboard,
they sit flat against it.
Now here, I'm just trying to size up how many rows
and how many roses I'm going to use
for the little blue portion of the flag.
And I decided it was only two rows
and that was even looking too long.
So we ended up with six little roses here.
And then I am going to take the red and the white roses
and I'm just going to get them all ready
by clipping them down.
Now that they're ready,
I just want to size up how many rows I'm going to need
and hopefully it ends perfect.
And oh my gosh, it did.
I was so thankful.
I didn't wanna have to cram them in there.
So now that I have all my rowing figured out,
I am going to just glue these down, not rocket science.
I'm not gonna bore you with the whole thing,
but I just put a generous amount of hot glue on there
and hold it down until it's in place
and move on to the next piece.
Now I hadn't spaced out the row going horizontally
and luckily by the time I got to the end
of the first top row, it fit just perfect as well.
So I was very thankful for that
because the frame had given me enough trouble.
Now here I'm just putting you on a time-lapse
because you don't need to watch me glue down
all the roses in slow motion.
And I just did it like a normal flag,
red, white, red, white, red, white,
and then I ended with the red down at the bottom
and everything fit in perfect.
And here's the final result.
Now I did two, the other one I didn't show you.
I'm not real thrilled with the little frame one
because the background is kind of a tan color.
I really like this one with the dark black background.
Let me know what you think.
So this video is part of the first of the month challenge.
And this month it is Patriotic DIYs
hosted by Rustic and Lace DIY and At Home with Gigi.
Links to their channels as well as the playlist
will be down in the description below.
So as soon as this video is over,
be sure you go down and check out their channels
as well as the playlist to see
what all the other creators have done.
So craft number two,
we are going to be making little flags.
And I found these little, they're not really skewers,
but they're just wood dowel sticks that I got at Walmart.
They're small.
I'm gonna use these for the sticks.
And then I found this little piece
at the Dollar Tree the other day.
I'm gonna deconstruct it.
And here are some really cool burlaps.
I got these at Joann Fabrics years ago,
and I've never seen them again.
Maybe they have them somewhere else,
but they've been in my stash for several years.
And I have these three different styles,
just stripes, stars, flags.
And then this is a burlap that has a sticky back.
I wasn't sure if I was gonna need this or not.
I ended up not needing it.
But the first thing I'm gonna do,
I want to tone down the color of these sticks
because if I hold them up to the burlap,
you see how bright they are compared to the burlap.
So I'm just gonna use some of my Antique Waverly Wax,
wipe it on, let it dry.
And now you can see it's more of the color of the burlap,
and it's not quite so clashy
when they sit up next to each other.
So I'm gonna do the rest of those.
Now that they are dry,
I am going to take, set the rest of those aside,
and my ribbon.
And I just kind of want to, or my burlap ribbon,
I guess I should call it.
And it only has one side to it.
So I was like, okay, I need to cut a straight line here
just to make the end even.
Then I'm gonna size up by wrapping it around
so that I have a design on both sides.
I didn't want it to just be a one-sided flag.
So I'm just kind of making sure how I want it to be.
And then I decided to use my pinking shears on this
because I thought it would give it almost like that,
you know how like flags,
when they've been flying in the wind for a while,
they kind of have that little tattered look at the end.
That's what I was going with for using my pinking shears.
But you can see it,
but it's not really the look that I was thinking
that it was going to give.
So just cutting it flat with regular scissors,
I ended up doing that with some of the other ones.
But I just wanted to put a little topper on this.
So the bead portion of this little piece
that I got from the Dollar Tree,
I'm just gonna deconstruct it.
And I'm gonna alternate on some of my flags.
I'm gonna use a red bead, a white bead, a blue bead.
This I'm gonna use in a different project.
And I was trying to push the skewers on
so that, or I call them the skewers,
but the little dowel sticks onto the bead
so that a little bit of the stick stuck above the bead.
And then I'm just sizing up
where I'm going to want that to land on my stick.
And then I'm just gonna wiggle strip of glue down on there,
put the dowel on top of it, and then wrap it around,
make sure that my ends are even and they all match
before I smash it onto that dowel in place.
And then once that side of it is dry,
then I went ahead and I opened it back up.
And then I've just wiggled some glue
down the top of the stick and wrapped it over.
Again, made sure my ends matched.
And then I just pressed down to make sure
that the glue adhered to the front side of that stick.
And then I proceeded to glue the top.
And burlap is very porous, so I was trying to be careful
and not put too much glue on there
because it does ooze through if you're not careful
and burn your fingers, ask me how I know.
And I did the bottom
and then I closed the side shut as well.
And then I just gently, gently tapped that closed.
And so here we have one of the finished ones.
Now I'm not gonna show you the whole thing
over and over again.
I just repeated the same process with each of the colors.
Now the red bead on this was a little too bright,
so I put a little antique Waverly Wax on there
to tone it down to try to match the red on the actual piece.
Now, when I got to the third flag,
the hole in the white bead was too small.
So I just took my little sander,
toned the end down a little bit
so I could get it put through there.
And I'm just measuring so that my flags are all the same.
And just repeated the process on this one as well.
So now I have my three flags here.
I did end up making four,
but what I'm gonna do is I'm gonna dress these up
a little bit.
Now I found these letters and numbers
at my local thrift store, a dollar for a package like this.
And there were like four of them and I bought them all.
I'm like, you know what?
I never see these at the thrift store.
So I bought those all and then I pulled out a 1776
and I'm going to paint them white
since they came in all colors.
And I was struggling for a little bit with the one
and I thought, oh my word, just roll some tape
so it's sticky and I stuck them on top of there
so they all stayed in place while I got them all painted.
And I did end up doing two coats
just so that none of the color showed through.
Now on this one, I was trying to figure out
what I wanted to put on it for a design.
At first I was thinking about putting the numbers on it,
but then I decided I would just cut out some strips
for the flag top and do that one that way.
Then I just set that aside for a second
and sized up how I wanted to put my numbers on this flag.
And at first I had them going in this direction.
And after I looked at for a little bit,
I decided I was going to change it up
and as I glued them down,
I put them on in the other direction.
It just made more sense.
And you'll see that in the final reveal.
But this was really hard not to get this on my fingers
because these letters are small,
but I got them all glued on there
and that's all I did for the star flag.
So I set that one aside and then back to this one,
I just lifted up those strips
and I glued each one of them in place.
And on this flag, I ended up only putting them on one side.
I think I just probably got distracted
and had to run back outside and do more of my farming stuff.
So I maybe eventually will put a few more strips
on the other side just so they match.
But here's what they looked like at the end.
Here's the 1776 and then my other three flags that I made.
And I'm going to have a lot of fun
putting these into some decor.
Now we're going to go on to craft number three.
And on this craft,
I am going to take one of my canning rings.
Now I have a whole bunch of these.
So using a few in crafts is not going to hurt anything.
Now this ribbon is also some that I got from Joanne's
and I was trying to figure out
if I could just pull the stitch
and have it unravel on this,
but the way they were sewn together, I couldn't.
So I ended up just taking my scissors and cutting it.
Now I'm sizing up how big I need to cut my strips
for the loops that I'm going to put on here.
And I have to give a little bit of extra room
because I'm kind of doing a slip knot.
And I used my old scissors for these
because this is wired ribbon
and I'm not going to be using the wire on this.
But what I ended up doing was taking my needle nose pliers
and just grabbing a hold of the wire
and slipping it out of each side.
So that was out of the way.
And then I went back to my good scissors
since now I was just cutting ribbon
and I cut out the strip of blue
and then I separated the strip of the white.
Well, you know, not really white,
but I separated those two pieces.
And then all I'm doing is making a loop
and slipping it around and then pulling it tight.
And it makes a little kind of slip knot
on the end of the canning ring.
And you could also use a wooden ring for this too,
if you have those available.
And I'm just going to work my way all around.
I'm going to go red and I know it's red, white, and blue.
Because this is rustic decor, it's not really white.
It's more like a, I don't know, beigey color.
And I'm just going to work my way around the whole thing
until I get it completely full.
And now that it's full, I'm looking at it
and it doesn't look as full as I want.
And normally when I do things like this, I use fabric.
And because this is ribbon,
it's a little bit on the stiffer side.
And so it wasn't kind of giving that fluffy look
that I was going for.
So I thought I'd take my pinking shears
and cut down the center of each one of those ribbons
to make it fuller.
Still wasn't full enough for me.
So I grabbed some of this fabric,
which looks very patriotic.
And I just cut out some thin strips
to match the others.
And I'm just going to slip them in between
all around the edges.
And then now that I have that done,
I still wasn't sure if I wanted to add more,
but I'm going to take some more of this star burlap
and I'm going to cut out a circle
so that I can fill the center void.
And then I just glued it into place the best that I could.
I was getting glue everywhere.
And now as I'm looking at this,
I'm just trying to get this pushed up
before the glue sets in place
and then pulling some of these taut.
I am going to take these two extra adornments
that were on the bottom of that decor piece
that I took apart for the other project.
And I'm going to string the hat through
and trying to just eye up the distance
of how far I want the two to be apart from each other.
And then I'm just tying a knot at the top of the hat
so that it stays in place.
And then I'm going to take a little bit of hot glue
and I'm just going to put a little couple dabs
on the backside of the hat.
And then I'm going to pull that jute twine
over top of the glue and hold that in place until it dries
so that the hat doesn't flop around
and the string doesn't end up, you know,
flopping into the front of the hat and look silly.
So now that I got that secured onto there,
I was like, oh girlfriend,
you should not have put the centerpiece in
until you slipped the bottom through and tied it.
So I set that aside for a second.
I noticed that at the top
where the hanger needed to be for the top,
the glue hadn't completely sealed.
So I was able to slip a piece of jute twine through there
and get a knot tied on there for the hanger at the top.
And then I just glued it shut after I was done with that.
And then I went on back to the bottom
and then I thought, you know what?
I can just loosen one of these knots on this piece of ribbon
and slip the string through there and tie a knot onto that.
And that will work just fine.
I just kind of got ahead of myself on this one.
So again, I'm just trying to size the distance that I want
because I'm gonna add one more little piece above the hat
once we get this tied on there.
And at first, when I was taking this piece apart,
I wasn't sure if I was gonna use the hat,
but once I got the top piece made,
I thought it would look cute on there.
Then I decided I wanted to make little sweet cuts
on the end of all of this ribbon.
So off camera, I did all that.
Now I also found these at the thrift store.
These are those like little pegboard sign things
that you stick the numbers and letters into.
And I just took my needle nose pliers
and broke off the little prongs
that hold them onto the board so that they would sit flat.
And I am going to glue these onto a piece of ribbon.
Now I'm gonna use that same piece of ribbon that,
or fabric, excuse me, that I used on the piece on the top.
And then again, oh my word, these are so tiny.
It was hard to get them all glued on there.
But we got the 250 for the 250th year celebration
of our nation.
And I'm going to trim down the ribbon
so that it's just fitting the 250 on there.
And then I'm gonna take some Fabri-Tac
instead of some hot glue so that it's not lumpy.
And I'm gonna smear a bunch onto the bottom piece of ribbon.
And then I'm gonna lay the jute twine over top of that.
So it's sandwiched in between the two pieces.
And I'm gonna take the 250, lay it over top of that,
and then press it together until it's nice and secure.
And that's how it was looking.
So now here it is hanging up.
Sorry, the lighting is not super great right now,
but you can see how the top, it filled out
a little bit more.
Like I say, normally I use fabric on that,
but then we have our 250 for the celebration,
the little hat, and the little tassel at the bottom.
And I added a white star to the top of the tassel.
So overall, I think it turned out really sweet
for using the stiffer ribbon.
So let me know down in the comments what you think.
So now we're going to move on to our fourth
and final craft for today.
And this one is really quick and easy.
Now this is a coffee can.
My dad, who is no longer with us,
he saved all the coffee cans out in his shop.
And let me tell you, I have a huge contractor bag full,
but I don't like to ruin them.
So I am going to take a piece of brown packing paper,
and I am just going to wrap it around the top
where the top seam is and get that all nice and taut.
And then once I do, I can then take my fingernail
and score where the bottom rim is
so that once I take that off,
I have a nice line that will show me where I need to cut.
And so now that I have that all cut out,
I'm just going to take my can.
I'm going to wrap the paper around it.
And you can either just tape this into place.
I used hot glue, but I only used hot glue on the paper.
So it's not actually stuck to the label
of the can or anything.
It's just going to be paper on paper.
And I did a very thin layer so it wasn't bulky and frumpy.
Pulled it tight and secured that down.
And then I took some more of my wide jute
that I made the flags out of,
and I decided that I wanted to wrap the center of this
with some of that.
So I just chose this pattern because it was the most simple,
because I'm also going to use some ribbon.
And I didn't secure it much of anywhere
except for at the end.
I just secured it down.
And then when I got to the other side,
I lined up the stripes,
gave it another little smear of hot glue,
and got that put down into place.
And then once that was glued on there nice and secure,
I grabbed this ribbon again.
I got this at Joann's a long time ago.
Trimmed up the ends
because the wires always like to stick out.
And I did leave the wires in here for this
because it wasn't really hurting anything.
And I'm just going to cover up that entire middle stripe
with the ribbon.
So again, just secured it at the start
and just securing it at the end.
I didn't glue it on the other side at all.
And I got it nice and taut so it didn't matter.
So now I'm looking at it and you can see the packing paper
because that burlap or yeah,
that strip of burlap isn't wide enough.
So what I'm going to do is just take this really thick rope
and I'm going to glue around the base
and I'm going to glue around the top
just to hide it and give it a little more flair.
And so here's what we're looking like when that's done.
Now this is the back, so you're never going to see that.
I'm just going to have this all facing the front.
And I really, really, really wanted to get a fern
and I went to town and looked for a fern
and they didn't have one.
So I just grabbed a couple of my bedding plants that I grow
and stuck it in there for now.
And I just thought this turned out really sweet.
Once I get a pretty little fluffy fern,
I'm definitely going to put it in there and enjoy this one.
So now it's time for the final reveal
of all the projects that we did today.
So starting off, we're going to take a look
at the hanging piece again that we did
with all of the ribbon and the fabrics
and the little adornments on it.
I thought it turned out really fun.
And then we'll move over to the ribbon rose flags.
And again, they're both sweet.
I just do prefer the one with the black background.
So if I ever do one in a frame again,
definitely not that frame and trying to paint it again,
but I'll use black.
And then we had our coffee can and then our little flags.
I thought they all turned out really sweet in their own way.
And I like that they're all kind of rustic style.
And I will be doing more videos coming up, patriotic.
Some of them will probably be more sparkly and fun,
but let me know what you thought.
If you had a favorite,
let me know where you're watching from.
And as always, thanks for hanging out with me today.
I will see you next time.
