MOST EXPENSIVE TARGET SIGHT $$$

Exploring Ancient Crossbows
3 followers
4 Video Views·May 14, 2026
MOST EXPENSIVE TARGET SIGHT $$$
AI Generated·May contain errors
Comments are disabled for this video.
What's up everyone?
Welcome back to Lancaster Unboxing.
We're doing a series this year,
a full series unboxing products
that Lancaster Archery sends us.
We do a full unbiased review
and most of these products I've never shot before.
Some I've shot before, some I've shot similar things of,
but this is a 100% genuine review
of whatever is in this box.
So first things first, this is number one boxing
and see what's in it.
All right, I did not wanna violently cut this box open
because what's inside here is kind of delicate,
but I didn't wanna mess it up.
So this, I have never used,
or I use this all the time,
but I've never used this brand before ever in anything.
So this is gonna be very interesting
to kind of see what this is all about.
Ultima, so they don't even have their name on it.
Oh, there we go.
Ultima, no, they still don't have their name on it.
Oh, there we go.
Shibuya, Shibuya, based out of Japan.
Very loud packaging, and I think this is kind of a cool,
kind of a cool carrying case, which is kind of cool.
So let's go ahead and open it up.
That's kind of nifty.
Instead of a hard case like Accel does
or other site people, it's a soft case, kind of like that.
So what we have is Ultima CP Pro Target Compound Sight.
So this is a, as advertised, a premier target sight.
And you don't really wanna use this for hunting or anything.
This would be a strictly target sight.
So I'm looking at it right now.
I know I had to review some specs
so I don't sound like an idiot when I'm opening this up.
So I do know a couple things.
I watched their video on it.
But this is, I think, the second gen of this type.
They basically just re-engineered some stuff,
made it a little bit better.
So this is like the sight bar, made out of carbon.
This part is carbon.
And I believe it's more reinforced than their other one.
So that's that.
See, we have a bunch of worm-type stuff.
Ooh, it looks like we got some sight tape.
So this is one thing that sight companies
have been doing more and more.
I think Accel started with it.
But these laser-engraved, or I actually don't think Accel.
I think CBE started with it.
But these laser-engraved sight tape,
which is just really good.
We got some hardware,
which I'm not 100% sure what that's for.
They come with these Allen wrenches.
I think they're, I don't know what those lines are on that.
That's kinda weird.
They're like painted on.
But, oh, I'm definitely gonna lose these right off the bat.
And what's in here?
Ooh, wow.
So this is what you mount your scope to.
And this thing has a lot, a lot, a lot of moving parts on it.
I'm probably gonna be a little bit confused
about it at the beginning.
But this somehow attaches to that.
So we gotta figure out exactly how we do that.
So this is everything you get,
I'm assuming, when you order just the sight bar.
So we didn't order a scope.
I know that they do sell some sort of scopes.
But we're gonna throw a UV3 on this,
an Ultra V3 by the end of this video.
So anyways, we're gonna dive in.
We're gonna figure out how to get this thing set up,
how to mount it on a bow,
and just kinda run from it there.
So first thing is this is what you attach to your bow,
which is pretty robust.
Definitely would trust it.
And what's really cool is it's reinforced,
reinforced with this like 90 degree triangle thing.
So compared to like a straight bar of carbon,
you have to intentionally put it in the same slot
and it can't turn.
There is a little bit of slop in there.
But when you turn it down,
there's like no move in that thing.
So I'm actually a big fan of that.
It's like keyed out.
It can only go in one spot, no slop at all.
So I like that.
And like I said, Shibuya is out of Japan.
So if Japan has taught us anything,
it's that they're extreme precision in engineering.
So I have a feeling this is probably gonna be
very, very high quality.
So I've seen people put this together before,
but I've never put one together.
So this is what the scope goes on.
And this lever right here, I think is the quick disconnect.
So you see, as you push it down, that goes in.
Oh, I think that's upside down.
So this is the sight bracket.
This is the scope part.
I think we push this in and then it slips on just like that.
That is fricking sick.
Because when you, instead of,
and I think you can still do that with this one.
Yeah, so you can do both.
You loosen this and your whole scope can pop off.
Or you can just slide the whole fricking thing off.
And then for scoring, or scoring, what am I saying?
For storing, you just have this and then this,
and you can put them wherever you want
instead of keeping your scope on or whatever.
So that's pretty sweet.
That's slick.
And you can slide it on and that is a tight tolerance.
There is very little wiggle room in there.
So you just slide it back on and I'm assuming,
yep, it just jumps right back on the tracks.
And that's that, and you're on here.
So a couple other features I guess I should mention.
And this is kind of across the board
on many sight manufacturers.
We have a micro little adjustment thingy here
so you can read what your sight tape is at,
and then you can loosen that screw,
you loosen that screw,
and then you can do fine tune adjustments on that.
So let's say you're a couple yards off,
but you know your sight tape is correct for your bow,
you can just bump that up and down.
That system seems pretty good.
I know on my Excel I definitely strip that screw
in that whole system a few times,
and I don't think that looks like that's gonna break
or strip or anything.
It looks like a little bit bigger screw on there.
On the other side, you have another place
where you can put a sight tape.
So you can put a sight tape on this side,
or you can put a sight tape on that side.
And I think this side is just like a concentric number line.
So that's not actually a sight tape.
I think you can put one on that side still.
Whereas like this one is a sight tape,
number 15 sight tape.
So that's kind of cool.
You can put them on both sides,
or you can put like a sheet of white strip
and you can just write on it whatever you want.
So that's super cool.
One thing that I kind of wish they did
is they only have a knob on the top.
And I know there's times like on my Excel site
where I twist it on the bottom,
but you can't twist it on the bottom.
So you only got one.
I'm sure that you just like adjust to that
and only twist it on the top,
but kind of wish that there was both.
Left and right adjustment seems pretty good.
And what's strange about this is the tube.
So actually we should just mount the scope on here
so you guys can see what it looks like.
So one thing I like compared to like an Excel mounting.
So this is the new Shibuya, this is an Excel.
Shibuya only uses this tiny little mounting screw.
Excel uses this giant one.
So we're gonna mount it and see how easy it actually is,
but I think it's gonna be a lot easier.
So I have my ultrascope and fits right in.
So it's keyed out in here.
So depending on what scope you have, it fits right in there.
And then I think all you do, or hold on.
You put the scope or you put the screw
in the scope like that and it goes right in there.
And that's tight.
Go in there and give it a good little extra tightness.
But that ain't going nowhere.
Huh.
And that mounts right to it with no extra bolts
or extra nuts or anything.
That looks clean.
So what I was talking about is the left and right windage.
There's actually a tube that goes inside
and it's not fully exposed.
Like you see it coming out as you go to the left.
So it's a very internal mechanism
and that feels really tight tolerance.
And let's see how far this left adjustment can go.
That is a long ways.
I'm not even there yet.
Oh, I'm an idiot.
It stopped turning after a while.
So that's a lot of adjustment.
I wonder what the adjustment is on here.
Let's see so I don't lose my place.
There I am right there.
Crank this bad boy all the way to the left.
All right, so the Shibuya left adjustment
or windage adjustment is that much.
True balls, phew.
So Shibuya's is nearly double the amount
of windage adjustment just off of the dial.
Now the tube you can move in and out
but on a Shibuya you don't move the tube.
What you do is you take out these two screws
and it actually shifts over.
So probably ultimately you get the same amount of adjustment
but the amount of micro adjustment in the Shibuya
you get more just instantly, which I kind of like that.
Also this tube in here, it's triangular.
It's not like a round tube, which is very interesting.
It's very sturdy.
That feels just incredibly solid
and I'm assuming it's because of the shape.
Just creates this like rigidity in there.
So next we have the windage or the bar adjustment,
which is one of the first things you should do
when you get it on your bow
is to get this sight bar lined up 100%.
So this is pretty standard on all target sights
but you loosen these two screws
and they're kind of like have slop in them.
So you get them 100% where you want them.
Yeah, there we go.
So you see there's a lot of movement in there.
They're kind of like oval shaped.
And then additionally,
depending on your bow setup and everything,
you might need to move this whole bar up and down.
So they give you two extra holes
where you can take this out, move it up or down.
And that's pretty standard along most target sights.
Okay, so also pretty standard on target sights
are second and third axis adjustments.
I believe this one is second.
So you loosen these two or one of them.
Okay, so that's third axis right there.
And now they have some weird washers on there.
I'm assuming that they're like extreme locking washers.
That's kind of what they look like.
See right there, they're like extreme locking washers,
which is really good because if these get bumped,
everything gets jacked up.
So you see that's your third axis adjustment.
And that's quite a bit of adjustment.
That's pretty normal.
It's not labeled, which is not the end of the world,
but maybe if they just put a little three
right there or something,
like just now I didn't exactly know which one it was.
So that, I mean, that'd be two seconds they can do that.
But anyways, it's there.
It looks solid and it looks good.
Okay, so your second axis actually doubles,
does double duty.
So if you just crack these loose,
it does your second axis.
But if you take them all the way out,
you can move them over to give you this jump
of left and right adjustment
like I was talking about earlier.
So that's kind of cool.
It's like a two purpose screw.
It saves like extra materials and extra parts in the site.
Ow, they like break loose.
It's those double lock washers.
Like that's a lot of force.
And then like crack loose.
So there, there is your second axis right there.
So it looks good.
Again, it's not labeled.
It'd be kind of hard to label it
because it does, those bolts serve two purposes.
So I'm gonna see what it looks like with the scope on
when we try to take it all the way off.
So it simply disconnects like that.
That's so sick.
It's that easy.
It looks super secure too.
Like there's extra contact points.
And there you get a good look at those second axis screws.
It just seems robust.
Like they put a lot of work
into just making it real sturdy.
There's a couple of screws on here
that I don't know the function of them.
This top one right here,
I'm not a hundred percent sure what that would do.
I'm assuming that if you loosen that,
this whole plate would come off.
I'm not exactly sure why you wanna do that.
Could be wrong, but I'm not a hundred percent sure
on that screw.
It also looks like they have these locking screws
on either side of the bar to kind of like clamp,
to clamp that down even more.
I'm not gonna touch them,
but I'm assuming you can adjust the friction levels,
which is really good because it always seems like
the head or the scope part gets loose
and you always rattle against this rail.
So that's good that you can adjust those
to keep that nice and snug.
So this sight, this is like the Rolls Royce of sights.
It's the pretty much best that there can be,
in my opinion, so far of holding this.
And there's just literally nothing wrong with it.
I really can't find anything other than a couple
of little like laser engraved things
that could do third axis, second axis,
just so you can find it really easily.
But other than that, like it's a solid, solid, solid sight.
So looking at Lancaster's website online,
there's definitely no reason why this isn't
the best target sight there is.
Coming at $650, this sight definitely will probably
last you your entire shooting career.
But we're gonna throw it on the bow.
We're gonna see what it shoots like,
how it kinda operates putting a couple of arrows through it.
And ooh, look at all those fancy colors too.
I didn't even know that.
Comes in plenty of colors to choose from.
That's really cool.
All right, well let's go throw it on a bow.
See what it's like.
Okay, so we're gonna throw this bad boy on a bow now.
Probably we'll just grab, put it on like my primary 3D bow.
So I was running my Excel Achieve XP, which is great.
Really haven't had any issues with this.
But it's loud after a while.
It gets rattly.
So we're gonna see the difference
between this Shibuya Ultima sight,
like top dollar, top of the line sight.
So let's put it on.
It's actually pretty easy to put on.
Fancy new last chance archery thing.
I'm actually super stoked about this.
So I've always had to figure out how to do this.
It makes it so much easier for videos.
And it's right here.
So here we go.
Grab the 8.8 Allen wrench.
Hoo!
Do you see the smoke on that?
Get this next one.
You can probably see the smoke on that.
And three, two, one.
Oh!
Did I just trip it?
Nah, it just broke loose.
That was some pressure.
But anyhoo, not too much of a difference
in like this mounting bracket.
They're pretty much the same across all brands.
What is nice about Shibuya is it clamps down in a circular.
So there's like a washer in there
that clamps down equal pressure rather than like one point.
And it's a bigger surface point.
That's interesting.
Does it really matter?
I don't know, but it's cool.
So they send, I don't know what these little,
these nuts and stuff is for.
I'm not gonna mess with them.
All I know is I need these two screws.
How did that happen?
I bet I ripped that off.
I just need these two screws.
So we'll start with one.
Do they use metric?
You think these are metric because they're from Japan?
Oh, that's why they send the Allen wrenches.
Metric, haven't heard that term in a while.
I'm assuming this is metric.
All right.
That does sit off the bow a lot.
Like it's not as slim, right?
Like compared to this,
like that's a little slimmer, I guess, I don't know.
Maybe I'm just seeing bad boys now.
Apparently too tight last time.
So we'll take it easy this time.
That's nice.
High quality threads there.
And we'll just run them in a happy medium.
There's not a sight window to see where you're lined up.
So you kind of have to feel it out, I guess.
But there's a little bit of slop in there.
See that movement?
Not that that really matters too much
because you clamp, oh yeah, it seats.
That's what that triangle's for because it's like this.
And as you put pressure down, it like seats into place.
Solid.
Should be good.
We'll get our left and rights close.
That should be pretty close.
We'll kind of get lined up where this was-ish.
Actually, it should be pretty close.
All right.
Well, let's go step outside.
We'll start close and just kind of shoot some.
See how it sounds, see how it functions,
kind of dialing it in.
But I'm a fan.
Looks nice.
Looks nice on the bow too with all that carbon exposed.
You like it, Mitch?
I like it.
I like it too.
All right, let's go shoot.
Doesn't feel like it's gonna wear out.
And it's chilly.
I'm cold.
All right, first impressions.
While shooting, can't really tell
that full draw any difference.
Didn't miss.
That's kind of quiet.
It did.
You know what I'd be interested in
is throw on like an Excel site and then throw this on.
Yeah, that's tight.
No rattles.
Okay, so I'm sitting way left still.
One thing that's kind of annoying
is this knob, release knob, they're very close together.
So I can only do like half rotations
instead of like crank on it.
My thumb hits that every time.
Kind of petty, but I did notice that right away.
Yeah, and also I almost went to go grab the bottom.
It's only on the top.
That's gonna take a second to get used to.
Well, it's super quiet.
There's no rattles in this thing.
Like typically, typically you can hear
like a little something something and I hear nothing.
So over time will that change?
We don't know that.
A lot of times like, you know,
as you shoot and work stuff around, they loosen up.
But based off of this,
based off of all of their double lock washers on there,
I haven't seen something like that on an Archery product.
I'm assuming that's gonna stay real tight.
But first impressions, that was really sick.
There you have it.
Unboxing, first looks, what comes in the package,
kind of what you can expect.
From, for my thoughts,
very highly engineered, tight tolerance,
should last you a very, very long time site.
Top of the end target site.
The all new Ultima CP Pro.
I don't know why everyone has to throw a pro in.
Pro, super, supreme, on fire product site.
But anyways, if you're interested in this,
make sure to check it out at Lancaster Archery.
They are shipping them right away.
So whenever you feel like anything on Lancaster Archery,
it's basically Amazon.
It is the Amazon of archery, Lancaster Archery.
Thank you guys so much for watching.
Catch you guys next time.
