Ducati 600 Special - by Jim Alonze

Motor Club
67 followers
#motorcycle #Gjwauto #Motorcycles #CruiserMotorcycles #reviewmotobike #reviewmotor #reviewmotorcycle
AI Generated·May contain errors
We have a very special machine at the shed,
the Alonzi 600 Special, and we have the man himself.
Jim, thank you for bringing this down.
It's such a remarkable machine.
I mean, it was at the 2019 show, wasn't it?
Yeah, 2019, yeah.
And you had one at the 2022 show,
which was the 750 Special?
Yeah.
I don't know where to start.
You probably have to start with it.
What did you start with?
Just a sketch, you know, done with a biro,
no flash, no computer renders or anything like that.
Right.
Just sort of scribbled it down like a rough shape.
Yeah.
That was what I started with.
And did you have the motor?
So it's a 600 Monster motor, yeah?
Yeah, it is, yeah.
And did you have, so you were like,
I'm starting with a 600 Monster,
and you just started sketching?
Yeah, yeah, I knew I wanted to use a Monster engine,
because I like how thin they are.
And I don't know, my style's,
I don't know how it's ended up like this,
but I just do sort of skinny wheels, skinny bikes.
I like board track races, so.
Yeah, you can see that, can't you?
Yeah, I did a sketch with like the L-twin in,
and then this happened.
Went from there.
Do you do this full-time?
What do you do for a living?
No, I have a business with my dad,
making two-stroke expansion pipes for motorbikes.
So that's pretty much all we do all the time.
The fabrication and the welding and everything.
You basically made every single part of this, didn't you?
Yeah, yeah, pretty much, yeah.
What did you start with, the frame?
No, I started with the swing arm, that's right.
Because that mounts to the motor,
so while the Monster was sat there,
I took the swing arm off, and I made this fit,
you know, the motor there with that wheel in.
And then I did the forks,
and the forks and the swing arm
were fitted to the standard Monster,
just as a start.
Because I knew once I'd finished the frame,
I'd want to really crack on.
And if I'd finished the frame,
then I was messing about with the swing arm.
I'd be chomping a bit to get on, so.
And when were you building this?
When was this?
November 2018, I started it.
And how long did it take to start to finish?
About a day before Bike Shed 2019.
Well, it was after,
because I didn't run it before the show,
I didn't have time.
I paid it like three days before or something.
Right.
So it was that close.
And so, you built the swing arm,
I mean the forks, let's talk more about these forks.
Yeah, the girder forks, yeah.
What did you base these on?
So I've got an old Triumph with some early Norton springer,
not springers, girder forks on.
Yeah.
And they're just cool, aren't they?
Yeah.
So I wanted to do something different.
And I wanted to do trellis to match.
Dewcats are generally trellis, aren't they?
All the early ones are.
So you've got trellis everywhere.
And what's the shock in here?
That's off a mountain bike.
Mountain bike rear shock.
So you can adjust it, all the stuff, rebound, damping.
And so the measurements and stuff,
that's all taken off the early Norton?
Yeah, roughly, yeah.
Amazing.
Yeah.
The way everything worked out, it was just,
you know, I guessed it.
But they weren't mint.
They weren't really good.
Yeah?
Yeah.
Lovely riding it, seeing them going up and down.
So you've ridden it?
I haven't ridden it.
Yeah, I haven't ridden it much.
I've done 100 miles on it, but.
Still.
And what are the wheels?
Harley V-Rod front wheels.
Both fronts?
Yeah.
So presumably there's a hell of a lot of machining
and organizing to get into it.
Just machined the disc mounts off this side
for the sprocket.
Yeah.
And then just a few spacers and a bit of jiggling
to get a sprocket on there.
Oh, man.
And then, so then, you got the front and the back
and then you joined them up with the frame, right?
Yeah.
The frame, the sinew, the lines of the frame,
is that what you had in the drawing
or did it evolve as you went?
Yeah.
What's it, it's all made stainless steel?
Yeah, 316 stainless.
Not the best frame material, but I did my last,
I did a 350 Duke at a single with stainless frame.
And just when it's under these lights and stuff,
the sheen you get off it when it's brushed.
I just, I had to do it again.
And you don't have to paint it and it don't rust, so.
Yeah.
And so once you got,
is that when you started on the bodywork?
Yeah, yeah, once I got the,
once I got on its wheels,
yeah, I started the bodywork then.
Talk me through the bodywork.
How, I mean, where does it, it's carbon, right?
It's carbon fiber, one piece.
And so is the nose fairing.
And basically what I did was,
I put some mold release agent on the frame
and I put body filler along the frame,
you know, so it gets like that shape.
Yeah.
And I got a big block of foam,
cut it to that shape, stuck it to the filler,
and then basically got a knife and sandpaper,
just carved it out.
Right.
Did you get it first time, how you wanted it?
Yeah, pretty much, obviously I put a center line on
and I did my best to get it even.
And then once you got the sort of foam puck,
so because I was only making one,
I wasn't ever going to make another.
I didn't want to make a mold,
spend the time making a mold,
so I put a coating on the foam that's like a hard shell,
mold release agent on that,
carbon fiber on top and laminated it.
I sort of did it backwards
and then dug the foam out of the spoon
and I was left with it, with the shape.
And obviously, because I put that filler on the frame.
Yeah.
And I lapped the carbon up under that,
you know, you get that fitment
where it just absolutely drops on.
So true.
And is it, where does the tank stop?
So, the battery's under here,
like a normal monster would be.
Yeah.
And obviously the carb stick right up in here.
I managed to get the air filter down there
to get a bit more room for the tank.
So the tank isn't massive,
but it sort of goes, you know, to about here.
Yeah.
And it's about that deep.
I can't remember how much it holds.
It's not, it's not big, but you know, it's enough.
You're not going to go touring.
No, it's not, no.
Oh man, there's so many just parts of it.
So things like foot pegs, exhaust,
everything's custom made, right?
Yeah.
Any other off the shelf parts kicking around on this?
I mean, mountain bike suspension,
any other little gems like that in there?
Not really.
You know, I just bought the levers off eBay
and the calipers.
Just bits I came across that were the right price.
Oh, you've got a little motor gadget speed.
Oh yeah, I've got, yeah.
It's got the M unit.
Yeah.
And the speed or motor and switches.
So it's, it's up to date with electrics.
It's not like,
It's such a special thing, man.
You're so humble when you talk about it,
but the work on it, it's outrageous.
Like the way the pipe,
I love the way the pipe wraps over the,
Yeah.
The rear subframe there.
Yeah, it took a bit of getting right.
You know, I mean,
some pipe stuff you see, you get,
it's a bit kinky and, you know,
not quite smooth.
So it took a few goes,
tacking them together and cutting them apart.
So.
And what are the, the cans?
Did you?
I made them as well.
Made them as well?
Yeah.
Of course.
It's titanium.
So.
Right.
First time doing titanium,
which I've watched so many YouTube videos
on welding titanium.
And it's just like,
well, it's stainless, really.
It's no different, yeah.
Wasted me time.
I love this,
this part around the headlight here,
the sort of,
the fixing for the headlight.
How'd you make that?
So I machined this,
this circular bit,
just on the lathe.
And then they were just bashed round by hand.
And he sort of welded there and there
and just obviously milled them in.
So these are indicators, yeah?
Yeah.
They're like them sequential,
you know,
like move along.
Yeah.
And then just welded and dressed it,
polished it.
It's outrageous.
Outrageous.
So you've done,
you did the 350 single.
Yep.
Then it was the 600.
Then it was the 750.
What were they?
That had a great name, didn't it?
The 22.
What was it called?
It was the,
it was what my sister called it,
the underwater sea bullet.
Right.
Cause it's a bit shark-like.
Yeah.
And it's got like a bullet front end, so.
Underwater sea bullet.
He got nicknamed that.
Yeah.
Whereas this is still the Alonzi 600 special.
Yeah.
Mate.
Original names.
And are you making anything else at the moment?
I've just got a Ducai ST2.
Right.
Which is a,
they're a 950 CC.
Yeah.
The water cooled one.
Yeah.
So I'm going to do the Alonzi 950 special.
And what is that?
What's going to be different,
anything different on that?
So it's water cooled,
which isn't my thing.
I normally like the simplicity
of the air cooled,
but I don't like radiators.
Yeah.
So it's going to have a fairing on.
You know, like the full fairing
to cover the,
to cover the radiator.
Are you going to carbon for that as well?
Ali, I think.
Ali?
Yeah, polished Ali.
Yeah, I enjoyed doing the silver, the 750.
Yeah.
So I'm going to have a go at that.
Okay.
Awesome.
Any chances it's going to be ready for May?
I doubt it.
Well, it'd be mint if it was, but.
There's always 2025.
Yeah.
Oh man.
It is an absolutely outrageous machine.
Thank you for bringing it down here.
No worries.
It's a pleasure.
Privilege.
To have it here.
People are going to enjoy seeing it.
And it's up for sale, isn't it?
It is up for sale, yeah.
Well, it.
It'll be on the classifieds.
Yeah, we'll get it on the classifieds
and then you can come down and see it.
Hope you enjoyed the video.
And if you've got any questions,
which I'm sure there will be,
put them in the comments
and we'll forward them to you, Jim,
and you can tell people how you did it.
Yeah, okay.
Mate, it's wonderful.
Cheers.
Thank you.
Do you think we missed anything?
No.
Unless you want to fire it up.
Yes.
Yes, let's fire it up.
20 point turn.
Jim, that is wonderful.
Just take a bit of warm it up.
Yeah.
Bit of.
Straight away.
Yeah.
I did run it last night, so that's probably why.
I hope you enjoyed the video as much as I did.
Please give us a like, a follow, and a subscribe.
And yeah, check out this amazing machine
on the BikeShare classifieds.
Or come and see it in person at BikeShare Tourage.
