Building a DIY REAPER Drone... Ended Badly

UAV - Drones - RC Jet Plane
1 follower
13 Video Views·May 13, 2026
This video is sponsored by PCBWay:
For high quality and fast PCB & CNC manufacturing visit: https://www.pcbway.com/
Thanks for watching! Let me know if I should rebuild this thing. Any suggestions on more durable ways to build RC planes?
Patreon: / michaelrechtin
CAD File: https://cad.onshape.com/documents/da0...
Follow me for more updates on projects:
Instagram: www.instagram.com/michaelrechtinyt/
Twitter: / rechtin_michael
Links to stuff I use (affiliate links):
AnyCubic Kobra Go: https://bit.ly/3quyQnL
Creality CR-10S: https://amzn.to/3BuAiM2
Ender 3 S1 Plus: https://amzn.to/3xv7zW8
Elegoo Mars 3: https://amzn.to/3UwVvh1
Creality LD002H: https://amzn.to/3QXhpqJ
Creality Wash Station: https://amzn.to/3S1NTBi
AI Generated·May contain errors
This is an entirely DIY drone with over a two meter wingspan.
It can fly itself completely autonomously, or at least it used to.
When people think of drones, they usually think of one of two things.
Quadcopters, or this.
Literally, if you search drones on Google, these are the two things that pop up.
This plane is called the MQ-9 Reaper, and I think it looks really cool,
but something tells me I'm not going to be able to just go fly one, so...
As I mentioned before, this drone is completely DIY,
and uses mostly things like laser cut wood and foam board,
as well as some 3D printing, of course.
This project served as a great opportunity for me to learn how to design for laser cutting.
The first thing I tackled was the wood frame.
I used quarter inch plywood for this,
and made the wood pieces as minimal as possible to reduce weight.
I think ideally, you would use something like balsa wood for this,
but this really cheap plywood is still pretty lightweight, and it's so much easier to get.
Both the fuselage and wing structures are made from a series of ribs and spars,
which can then get covered later in foam board.
Assembling the wood structures is actually really satisfying,
because it's just a big puzzle once you have everything cut out.
That is so satisfying.
The wings get held together and attached to the fuselage using some carbon fiber tubes.
This should make them easily removable, but keep everything very rigid.
Next up was covering the outside of the wings in foam board.
This stuff is great.
It's lightweight, and it makes building RC planes really easy.
It also laser cuts super nicely,
which means you don't have to spend time with a ruler and exacto knife cutting out complex shapes.
That said, if you don't have a laser cutter, you can still totally cut this out, no problem.
And even on the laser cut parts, there's still a lot of trimming and beveling needed.
On the trailing edge and seams of the wing, I added this fiber reinforced tape.
This stuff doesn't really look the best, but it should help the wing last longer.
Using this combination of wooden spars and foam allows me to build wings quickly,
but still have a proper airfoil shape to the wing.
The surface of the fuselage is also made out of foam board,
but it's made out of several smaller pieces to make everything easier to assemble.
And to attach everything, I used the king of all tools, hot glue.
For some of the parts of the plane with more complex features, I opted to use 3D printed parts.
For this, I used lightweight PLA,
which ended up cutting the weight of those parts in half compared to normal PLA.
I also used this lightweight PLA for the ailerons,
which meant I could build some really nice hinges into the wings so everything blends together.
I was really happy with how these turned out.
At the rear of the plane, there is a V-tail section, which acts as a rudder and elevator.
These are also just made out of foam board, and then they slot into this 3D printed piece.
The control surfaces on the V-tail are also just made out of foam board,
and I used tape to reinforce the hinges.
If you guys are interested in seeing more updates on projects like this,
I recently started posting stuff on Instagram, so go check that out.
I even have a sneak peek for a future project already posted.
To power this thing, I'm using a brushless motor that is definitely overkill,
but I just had it laying around, so I went ahead and used it.
I paired it with a 9 inch 3 blade prop, which should give this plane plenty of thrust.
Finishing the parts up with a paint job means we're almost ready to go.
However, there's something we're forgetting. Electronics.
This thing has to be able to control itself somehow.
I've got servos embedded in the wings and tail which will move the control surfaces,
but it needs to get those commands from somewhere.
And that is where this mess comes in.
This is a Matek 405 flight controller, and I'm running RG plane on it.
There's an RC receiver which communicates to my RC transmitter so I can give it commands,
as well as a telemetry radio and GPS.
All these things together mean that the plane should be able to fly itself.
In theory, at least.
Now, if you're working on a project like this, or really any DIY project,
you might want to check out the sponsor of today's video, PCBWay.
They offer high quality PCBs at really affordable prices,
as well as a lot of other stuff like CNC machining and metal 3D printing.
If you don't need metal parts,
they can also print them out of high performance plastics like nylon,
with processes like MJF that are hard to get on the hobby scale.
Their website makes it really easy to get a quote,
and I've used their services in the past and always had good results.
So check them out using the link in the description below.
Now let's get back to building a plane.
So at this point, the plane is done and should be ready to fly.
The next morning, I headed out to my local RC field,
only to be greeted by a thick layer of fog.
So obviously we had to wait until the fog went away.
So instead, we went and picked up coffee, which is an absolute essential.
And then I flew my Mavic Mini up above the fog,
and it actually turned out looking pretty cool.
After about an hour of waiting around,
the fog was finally gone and it was looking like we could fly.
So it's about ready to go here.
Take this guy out of here.
I initially tried to take the plane off,
but it wasn't rolling very well in the high grass,
and the propeller has very little ground clearance.
So it was just hitting the ground.
So instead, I just hand launched it.
Real make or break moment right here.
Toss it and see what happens.
This thing flew really well,
not to mention it looked awesome in the air.
After flying the plane around for a little bit
and doing some basic tuning,
I decided to bring it in for a landing.
Landing gear took a beating.
We now have a much lower profile landing gear.
This pretty tough landing definitely caused some damage,
but luckily a little tape can fix just about anything.
Tape is an essential aerospace tool.
Everyone knows that.
Next, I wanted to test some of the autonomous features in RG Pilot.
This wasn't too hard,
and I just had to set a couple parameters.
On the second flight, I once again hand launched it
and then flew it up to about 200 feet
before putting it in loiter mode.
In loiter mode, the autopilot tries to maintain the same altitude,
but flies in circles around a point.
After about 30 minutes of flying,
the battery was getting pretty low.
So I once again brought it in for a landing.
This time, since there was no landing gear to take the impact,
the prop hit the ground really hard and the whole motor ripped off.
So a few fixes were definitely needed.
Once I got back to the house,
I took the plane apart and found that
some of the wood and super glued joints had failed.
Luckily, I could just recut these pieces
and this time used tons of epoxy to hold everything together.
And zip ties, of course.
No job is complete without a few good zip ties.
While I had the plane apart,
I also swapped out the ESC for one that was rated for 6 cell batteries.
This will allow me to put big 6 cell batteries in here
and hopefully get a longer flight time.
The next day that we had good flying weather,
I loaded everything back up into the car
and went to go fly it again.
All right, so we got the bigger batteries now.
We got these big 4,000 milliamp hour 6 cell batteries.
And we're going to put this thing up and just do big loops.
And we'll see how long it flies.
Because of how heavy the big battery in the front was,
the plane ended up being pretty nose heavy.
So I added another battery behind the wing,
which should hopefully balance this out.
This added a little more weight than I wanted,
but I guess it could help the flight time.
All right.
I don't think that's flying again today.
That's so bad.
Back to the drawing board, I guess.
They ask you how you are and you just have to say that you're fine.
And you're not really fine.
Go survey the wreckage.
Hey, some parts are still good.
Now, it's really just a couple of cosmetic fixes, really.
Well, so yeah, at this point,
this thing needs some serious rebuilding
if it's ever going to fly again.
I think what caused this to crash
was that it's just a little too heavy.
And it was also very nose heavy,
even though I put that battery behind the wing.
And my throw also kind of sucked.
Maybe I'll rebuild this in a future video,
but it seems like it definitely needs to be built
out of something more robust.
Maybe I'll use some foam or something like that.
Let me know if you guys have any suggestions
on ways to improve the design.
It sucks that this project ended in a crash,
but you know, that's how it goes sometimes.
Anyway, thanks for watching.
Subscribe for more and I'll see you guys in the next one.
