3 Pro Shots You NEED to Learn Slide Stun Follow Stun Draw Explanation and Game Scenarios

TOP Billiards Skills
1 follower
AI Generated·May contain errors
In this video, we'll break down the sliding cue ball, stun follow,
and stun draw. First, we'll explain each shot in detail, then apply them to real game situations.
After that, we're going to go through drills designed to help you master these shots
and take your game to that next level. So if you're ready, let's get started.
In pool, there are three primary ways to strike the cue ball. Top spin, center, and below center.
Before you can master a sliding cue ball shot, it's crucial to understand the phases
the cue ball goes through during each type of shot. I'll demonstrate each shot, and I'll be
using the 10 ball to represent the cue ball so it's easier to see the rotation. The first shot
would be a rolling cue ball, and this is done by striking above center. And we can see that the 10
ball begins rolling immediately. So the rolling cue ball has just one phase it goes through.
The second shot would be striking center on the cue ball. On this shot, since we didn't apply any
low spin or top spin, the 10 ball begins sliding immediately. Once the sliding wears off, the 10
ball begins to roll forward. So the sliding cue ball would have two phases. And the final type
of shot is the low spin shot. On this shot, the 10 ball will go through three different phases.
It begins with a low spin phase, and once the low spin wears off, it begins to slide. Then finally,
it begins rolling forward. Now let's examine each type of shot when striking an object ball full.
On this shot, we'll be shooting above center and striking the one ball full. And what's interesting
is that when the 10 ball strikes the one ball, it momentarily pauses in place before continuing
its forward motion. In the next shot, we're going to shoot center on the 10 ball. And if the 10 ball
strikes an object ball full while sliding, it will come to a complete stop. And finally, if we shoot
below center and it strikes one ball full, just like the previous top spin shot, it will momentarily
pause in place before spinning backward. As we've seen, there are two different ways of making the
cue ball slide. The first way is by shooting center on the cue ball. And the second way is by using low
spin. Let's first examine the low spin shot. How long the low spin lasts before sliding depends on
the speed of the shot and where the tip strikes the cue ball. I'll show you two examples of a low
spin shot. And once again, I'll be using the 10 ball as the cue ball so you can see its rotation.
On this first shot, I'll be shooting between center and maximum low. And the low spin lasts
this far before the low spin wears off and it begins sliding. On the next shot, I'll be aiming
with maximum low and using the exact same speed as the first shot. And since we're striking lower
on the 10 ball, the low spin lasts longer before it begins sliding. If an object ball is within the
phase of each shot, the 10 ball will come to a complete stop if it strikes the object ball full.
The second way of making the cue ball slide is by shooting center on the cue ball. And how far
the cue ball slides before rolling forward depends on the speed of the shot. For example, I'll shoot
this first shot at a soft speed and the 10 ball slides only for a few inches. I'll shoot the next
shot with more speed and the sliding of the 10 ball lasts longer. And I'll shoot the third shot
with the strongest speed so the sliding of the 10 ball happens for a longer period of time.
So we've learned that there are two ways of sliding the cue ball, shooting center and
shooting with low spin. Here's a sliding cue ball drill that uses both of these methods. And if you
can work your way through this drill, your ability to control a sliding cue ball will drastically
improve. We'll start here with the object ball one diamond away from the cue ball.
On this first shot, I'll pocket the object ball by shooting dead center on the cue ball.
The goal is to slide the cue ball all the way to the object ball, creating a stop shot. Next,
I'll shoot the cue ball with one tip below center, which means I can slightly reduce my speed from
the previous shot. Once I can stop the cue ball, I'll move on to the next shot, which is striking
the cue ball between center and maximum low. And finally, I'll be striking the cue ball with
maximum low. This shot requires a very soft stroke and does take a little bit of practice.
Once I'm able to stop the cue ball using maximum low, I'm going to move the object ball to the
next sticker. Once again, I'll first start by shooting center on the cue ball. As you go through
this drill, you'll learn very quickly that once you get a little distance between the cue ball
and object ball, it takes a very strong speed to slide the cue ball all the way to the object ball
by shooting center. Once you are able to stop the cue ball, then move on to a tip below center
between center and maximum low, then finally maximum low. Now we'll move the object ball to
the next sticker. And from this distance, I'm going to start by shooting the tip below center.
This shot requires a very strong speed, so you may get a little bit of cue ball movement until
you are finally able to stop the cue ball. And next, we're going to shoot between center and
maximum low, and then maximum low. Now we'll move the object ball to the next sticker.
And from this distance, we're going to start by shooting between center and maximum low,
and then maximum low. And as you go through this entire drill, you'll discover which way of shooting
the cue ball is best based on the distance. For example, here's a breakdown of my preference for
each shot. When the object ball is closer, I find it easier to play a stop shot by shooting center
or a tip below center on the cue ball. And from the next location, it's between center and maximum
low. And for the final three shots, it's maximum low. Practice this drill until you can get through
each shot. Then go through the drill again and try to perform each shot successfully three times
before moving on. Once you go through this drill, you'll have a better feel for sliding cue ball
shots from different distances. For example, if I have this shot in an eight ball game, since the
five ball is about a diamond away from the cue ball, or about 12 inches, I know from the sliding
cue ball drill that center on the cue ball gives me the best chance of stopping the cue ball.
Now the object ball is about three diamonds away, so for me, maximum low gives me the best chance
for a stop shot. A common misconception about performing a sliding cue ball shot is that it's
only performed by shooting center on the cue ball. As we learned in the sliding cue ball drill, this
is true when the object ball is close to the cue ball, as in this 10 ball game, where I need to
play a stop shot. And if you have ball in hand and you need to play a stop shot, place the cue ball
within a foot from the object ball and just shoot center on the cue ball. And it should be fairly
easy to play a stop shot. In this eight ball game, I'm on the one ball and I need to play a stop shot,
so I need the cue ball sliding by the time it strikes the one ball. From this distance, a strong
player would never play a stop shot by shooting center on the cue ball, due to the strong speed
required to keep the cue ball sliding all the way to the object ball. Since the distance between both
balls is about three diamonds, I know from the sliding cue ball drill that maximum low, or just
above maximum low, gives me the best chance of stopping the cue ball. Here the cue ball and object
ball are even farther apart, so once again I'll play a stop shot by shooting with maximum low,
or just a hair above maximum low. We've seen what happens when the cue ball strikes an object ball
full when struck with top spin, low spin, and a sliding cue ball. But what happens when the cue
ball strikes an object ball at an angle? Let's start with this shot. We'll be pocketing the one
ball with a sliding cue ball, top spin, and low spin. And once again I'll be using the 10 ball
as the cue ball, so you can see its rotation. In this first shot, I'll pocket the one ball with a
sliding cue ball, and we can see that the 10 ball is sent toward the corner pocket. We'll shoot the
one ball one more time with a sliding 10 ball, and once again it heads toward the corner pocket.
When a cue ball strikes an object ball at an angle while sliding, it is sent along a 90 degree path.
An easy way to find the 90 degree path off an object ball is to place a piece of paper under
the object ball. Point one edge of the paper toward the pocket, and the other edge will be
parallel to the cue ball path if it's sliding when it strikes the one ball. Using a piece of paper
when you're training is a great way to find the 90 degree path. And the other way of finding the 90
degree path is to make the letter L with your fingers and hold it over the ghost ball. On this
shot, my index finger is pointing toward the pocket, so my thumb will indicate the 90 degree path.
So in this situation, the 90 degree path will take the cue ball to the target area.
From this distance, I can create a sliding cue ball by shooting center. As I mentioned, there are
three phases that the cue ball goes through when shooting with low spin. The first phase will be
low spin, then the sliding phase, and then it begins rolling forward. When you see a top player
aiming low in the cue ball, but their cue ball ends up rolling forward after striking the object ball,
this usually means they were trying to minimize the forward roll of the cue ball after impact with
the object ball. If we examine this shot from overhead, we can see all three phases of the ten
By shooting the shot this way, I'm able to minimize my forward roll, giving me position for my next
ball. In this game, I need the cue ball to only roll forward a couple inches after striking the
one ball. I could shoot softly with a rolling cue ball, but it would require an extremely soft shot,
and the cue ball or the one ball may roll off course. By shooting with maximum low, I'm able
to use more speed and still control the amount of forward roll after striking the one ball.
When performing a sliding cue ball shot, there are two factors you have to take into consideration.
The first factor is the entire cue ball path, including the path to the object ball. The second
factor is the angle you have on the object ball. Next, we'll go through several examples of sliding
cue ball shots where we'll use these two factors to determine how to properly shoot the shot.
Let's examine this shot. I need to land here for position on the eight ball. So here is the cue
ball path. When the cue ball is close to the pocket line like this, and you're within two feet, just by
shooting center on the cue ball, you can send it to any point along the 90 degree path, just by
controlling your speed. So on this first shot, I'll be shooting center, and the cue ball should land in
the target area. Now I have the same shot on the one ball, except this time the eight ball is at the
other end of the table. Since the 90 degree path still works for getting my position, I'll aim
center again on the cue ball, but this time increase my speed from the previous shot. As I mentioned,
when the cue ball is close to the pocket line and within two feet, as in this example, just by
shooting center, you can send the cue ball anywhere along the 90 degree path. So on this first shot,
I'll shoot center and land here for the eight ball. Now the eight ball is farther down the table.
So once again, I'll shoot center and just increase my speed from the previous shot.
And finally, I'll use even more speed and send the cue ball off the side rail for position on the eight
ball. By shooting center, I was able to play three different position areas along the 90 degree path.
In this eight ball game, there isn't much room for error. Fortunately, however, a sliding cue ball heads
in this direction, which should work for playing position on the eight ball. Since the cue ball is
within two feet and it's close to the pocket line, I know that shooting center with a firm stroke
should send the cue ball in the proper direction. So we've learned that when the cue ball is within
two feet of the object ball and it's close to the pocket line, as in this situation here, we can shoot
center and send the cue ball toward the position area. But what happens when we have more angle on
the object ball, like in this example? If I shoot center on the cue ball at the minimum speed required
to slide the cue ball all the way to the one ball, the cue ball goes past our target area
since I'm striking less of the one ball. Due to the angle on the one ball, I need to shoot softer but
still slide the cue ball. If we go back to the sliding cue ball drill, I was able to slide the
cue ball to the object ball with a soft stroke by shooting between center and maximum low.
So the same would be true for this shot. On this shot, I'll aim between center and maximum low
and I'm able to create a sliding cue ball with a soft stroke.
If you shoot this shot and the cue ball is tracking this way, that means the cue ball
wasn't sliding when it struck the one ball but instead had low spin on it. Shoot the shot again
but this time take your speed down just a little bit. The only time a player would perform a sliding
cue ball shot by shooting center from this angle would be in a situation like this where they need
to send the cue ball a long distance for a position. In this eight ball game, the cue ball is close
to the one ball pocket line and within two feet. So this means I can perform a sliding cue ball
shot by just shooting center on the cue ball. Now the cue ball is a little farther than two feet
away. If we go back to the sliding cue ball drill, once the object ball is two feet or beyond from
the cue ball, it becomes very difficult to slide the cue ball all the way to the object ball just
by shooting center. Once the object ball is two feet or beyond, it's easier to create a sliding cue
ball by shooting below center. So on this shot I'll aim a tip below center. Here's another example of
the cue ball over two feet away and it's close to the pocket line. On this shot I'll shoot with
the tip below center and the cue ball follows the 90 degree path. Since I have to use a strong speed
to move the cue ball to the side rail, aiming too low in the cue ball may result in the cue ball
having low spin by the time it reaches the one ball. In this eight ball game, the cue ball is over two
feet away and it's close to the pocket line. On this shot I'll aim a tip below center and use a
strong speed to move the cue ball along the 90 degree path. The only time a strong player would
shoot center when the object ball is two feet or farther from the cue ball is when they have a
position area that allows for a rolling cue ball. And here's what I mean. In this eight ball game I'm
on the one ball and I have a position area that allows for a rolling cue ball. So even if the
cue ball is slightly rolling when it strikes the one ball, I will still have a decent shot on the
eight ball. If I really need the cue ball staying close to the 90 degree path on this shot, I'll aim
about a tip below center which should make it a little bit easier to create a sliding cue ball shot.
Here's another example when a player would use center in the cue ball to perform a sliding cue
ball shot. On this shot I have a little room for error if my cue ball is rolling instead of sliding
when it contacts the one ball. I can land in or close to this area with a rolling cue ball and
still have position for the eight ball. If this were the situation, now it's imperative that the
cue ball is sliding when it strikes the one ball in order to avoid the stripes. So on this shot I'll
aim below center making it easier to perform a sliding cue ball shot. As we've learned, the other
way of performing a sliding cue ball shot is by shooting below center. Generally there are two
circumstances where a player would shoot below center to perform a sliding cue ball shot. The
first would be when there is distance between the cue ball and object ball, and the second
circumstance would be when the cue ball is farther from the pocket line. Let's examine this eight ball
game. On this shot I need to pocket the one ball with a sliding cue ball for position on the eight
ball. As we just learned, when the object ball is over two feet away, it becomes very difficult to
slide the cue ball all the way to the object ball just by shooting center. If I aim center on this
shot and let up on my speed even a little bit, the cue ball will be rolling forward before striking
the one ball. If we examine the 90 degree path, we can see that it heads toward the position area.
So on this shot I'm going to use a firm stroke and shoot with a tip below center. As I mentioned,
there are two factors when using low spin to slide the cue ball, distance and angle to the object
ball. In this example we're close to the one ball, but due to the angle, shooting center to slide the
cue ball will result in the cue ball going past the position area. At this angle, since we're
striking very little of the one ball, it won't take much speed to send the cue ball to the side
route. So this shot would be similar to this shot from this sliding cue ball drill where we were
using maximum low to slide the cue ball. Now if this were the layout, now the angle isn't helping
to move the cue ball to the position area. So on this shot I could shoot center with a firm stroke.
This shot would be similar to this shot from the drill where we were shooting center. In this eight
ball game, I need to pocket the one ball and land here for position on the eight ball. Due to the
angle on the one ball, I'm really going to have to watch my speed since the angle is really helping
to move the cue ball to the position area. If I shoot center and use the minimum speed required
to slide the cue ball to the one ball, we can see that the cue ball goes beyond the target area.
This shot would be similar to this shot where we're striking between center and maximum low.
Earlier we talked about situations where we would shoot long shots with center when we had a
position area that allowed for a rolling cue ball. And the same can be true for shots like this where
we have a position area that allows for a low spin shot. For example, I could shoot this shot with a
tip below center and perform a sliding cue ball shot. But if I let up on my speed even a little
bit, the cue ball may be rolling by the time it strikes the one ball and be sent into the 10 ball.
Instead, I'll aim just a little lower on the cue ball which ensures the cue ball will have
low spin on it by the time it strikes the one ball. Here's a similar example. On this shot,
I could perform a sliding cue ball shot by shooting between center and maximum low,
but letting up on my speed even a little bit may cause me to scratch in the corner pocket.
Since the situation allows for a cue ball that has low spin on it, I shoot this shot with maximum low
which helps reduce the risk of a scratch. Earlier we saw what happened when the 10 ball struck the
one ball with forward rotation. It momentarily paused in place before continuing its forward
motion. And the same thing happens when a cue ball strikes an object ball at an angle with forward
rotation. Let's examine this shot again. This time I'll be striking the 10 ball with maximum high.
And once the 10 ball strikes the one ball, it slides along the 90 degree path before the top
spin propels it toward the end rail. I'll shoot this shot again, but this time I'm going to reduce
the amount of forward revolutions. So I'll be shooting lower on the 10 ball between center
and maximum high. Once again, the 10 ball stays on the 90 degree path before rolling forward,
but this time it is sent toward the end rail closer to the pocket.
If we put both shots together, we can see that they both stay on the 90 degree path
the same amount of time, but separate due to the differences in their revolutions.
Performing a stun follow shot means you're controlling the direction of the cue ball
off the 90 degree path just by the amount of forward spin the cue ball has when it strikes
the object ball. A stun follow shot can strike any target between the 90 degree path and the
maximum follow path. On this shot there are two different ways to send the 10 ball to this target.
The first way is to use a soft speed and aim with maximum high. The second way is to use a stun
follow shot. On this shot I'm going to use a firm speed and aim two tips above center. I'm using a
firm speed which will give me control over the amount of forward rotation the 10 ball has by the
time it strikes the 1 ball. Now in this shot I just want to roll forward a couple inches for
position on the 8 ball. On this shot I'm going to aim center and my goal is to have the cue ball
rolling forward before striking the 1 ball. By controlling the amount of forward roll before
striking the 1 ball, I'm able to control how far the cue ball rolls forward after impact.
Let's examine this shot where we're playing 9 ball and we're on the 8 ball. It's rare that a
strong player would pocket the 8 ball with a soft speed. Due to the distance involved,
shooting at a soft speed may result in either the cue ball rolling offline or the 8 ball rolling
offline and causing a miss. On this shot I'm going to aim center and use a firm speed. By shooting
center, even at a firm speed, the cue ball will still have a small amount of forward roll by the
time it strikes the 8 ball. In a few minutes I'm going to go through a drill that will really help
you develop a feel for the stun follow shot. But first I'm going to explain why a player would
choose to perform the stun follow shot. Let's examine this shot on the 1 ball. The 90 degree
path heads in this direction. A maximum high sends a cue ball to this point on the side rail.
By using a stun follow shot, I can send the cue ball to any point on the side rail between the 90
degree path and the maximum high path. And I'll be using the same speed for each shot. For example,
if I wanted to send the cue ball to this point on the side rail, I would strike just a hair above
center with a firm stroke. Now I'll strike about a tip above center and the cue ball travels toward
this point on the cushion. Next I'll strike just a bit higher on the cue ball and it is sent toward
this point on the cushion. And finally I'll be striking just below maximum high and the cue ball
is sent toward this point on the cushion. So just by controlling how much forward roll the cue ball
has by the time it strikes the 1 ball, I can send the cue ball to any point between the 90 degree
path and the maximum high path. In this 8 ball game, I'm on the 1 ball and I need to play position
for the 8 ball. The 90 degree path heads to this point on the end rail. A maximum high will send
the 10 ball in this direction. Since I need to land here for position on the 8 ball, I'll aim about
two tips above center with a firm stroke. Now the 10 ball is sent between the 90 degree path
and the maximum high path. Here's a drill that will help you better understand the stun follow
shot. In this drill, we'll start with the cue ball and object ball here. The goal in the first shot
is to pocket the 1 ball and have the cue ball land in the same spot as the 1 ball. So we'll
be trying to roll forward only a couple of inches after striking the 1 ball. If you shoot this shot
and the cue ball stops, then shoot it again at the exact same speed, but this time aim slightly
higher on the cue ball. Remember your speed and where you strike the cue ball have to be in sync
to perform a successful stun follow shot. Next we'll be striking the 1 ball and rolling forward
half a diamond using a firm stroke. If you're rolling too far, you can aim at the same spot
on the cue ball and just increase your speed. And if you're not rolling forward enough, then
shoot at the same speed, but just aim a little higher on the cue ball. Next we'll be pocketing
the 1 ball rolling forward a full diamond. Once I complete all three shots, I move on to the next
object ball location. Once again, I try to complete all three types of shots. And when you first go
through this drill, it may take a while before you can complete all the shots. But the more you
practice this drill, the easier the shots become and the quicker you'll get through them. The first
time you go through this drill, try to get through each shot once before moving on to the next shot.
And the next time you go through the drill, perform each shot three times successfully before moving
on. And when the object ball is here, you may find that rolling forward a couple of inches
is easiest when you're aiming a half tip below center. And rolling forward a half diamond is
easiest when aiming center on the cue ball. In this 8 ball game, I'm on the 1 ball and I need
to play a position for the 8 ball. I'll first find the sliding cue ball path. And here's another
quick way to find the 90 degree path. I'll place the cue stick on the pocket line, then slide it
over keeping it parallel to the pocket line. The line that connects these two lines will be the 90
degree path. So right away I know a sliding cue ball won't work for playing position on the 8 ball.
Since I need to strike further down the rail, the cue ball will need top spin by the time it strikes
the 1 ball. If I strike this shot with maximum high, we can see it slide along the 90 degree
path momentarily before the forward rotation sends it toward the stripes. If I shoot this shot again
but shoot lower on the 10 ball, between center and maximum high, now the 10 ball has fewer
revolutions on it, which sends it around the stripes. And if we were to put both shots together,
we can see that just by adjusting the amount of top spin the 10 ball has when it strikes the 1
ball can have a dramatic effect on the 10 ball's path. Let's go through several more examples of
how to use top spin to change the cue ball's path. In this 8 ball game, I have a very slight angle
on the 1 ball, and I need to play position for the 8 ball. Once again, I'll use the 10 ball as
the cue ball so you can see its rotation. If I shoot this shot with maximum high, it slides along
the 90 degree path before the top spin propels it to the other side of the 8 ball. In order for
the cue ball to be sent further down the rail, I need to decrease the amount of forward spin from
the previous shot. So this time I'll shoot just below maximum high, and now the 10 ball is sent
further down the rail. If you're interested in more training videos, we have almost 50 hours
of training on the Xerox website that will help you reach that next level. You can also explore
the Xerox recommended playlist, which has over 11 million views. In this 8 ball game, I'm on the 1
ball, and I need to play position for the 8 ball by sending the cue ball off the side rail. I'll be
using the 10 ball as the cue ball so you can see its rotation. When the cue ball path is close to
the 90 degree path, like in this example, that means the cue ball only needs a small amount of forward
rotation by the time it strikes the object ball. The more forward rotation the cue ball has by the
time it strikes the object ball, the further from the 90 degree path it will be sent. So a maximum
high shot will send the 10 ball in this direction. As we learned earlier, once a cue ball is farther
than two feet from the object ball, it takes a very strong speed to shoot center and have the
cue ball slide all the way to the object ball. Usually from this distance, the cue ball will
begin rolling by the time it strikes the object ball. So we're going to use that to our advantage.
On this shot, I'll aim center and use a firm stroke, and we can see the 10 ball sliding all the way up
to this point before it begins rolling. Since the 10 ball has a small amount of forward roll on it
by the time it strikes the 1 ball, it is sent along the correct path. In this game of 8 ball,
I'm on the 1 ball, and I need to play a position for the 8 ball. The 90 degree path heads in this
direction. Maximum high will send the 10 ball toward the 14 ball. If the 10 ball has a small
amount of forward roll by the time it strikes the 1 ball, it should travel between the two stripes.
So on this shot, I'm going to aim center and use speed to control how far the 10 ball slides.
The goal in this shot is to have the 10 ball rolling forward by the time it strikes the 1 ball.
In this game of 8 ball, I need to play a position for the 8 ball here. If I use maximum high, the
cue ball will strike the end rail right before the corner pocket. Now if I shoot the shot again,
and I strike the 10 ball just a hair below maximum high, just that slight difference
in forward rotation is enough to send the 10 ball toward the corner pocket.
How long the cue ball stays on the 90 degree path when using topspin depends on the angle
of the shot. For example, in this 8 ball game, I need to send the cue ball 3 rails for a position
on the 8 ball. I'll shoot this shot from two different angles. From this angle, the 10 ball
heads straight toward the 14 ball. Now I'm going to increase the angle, and the 10 ball stays on
the 90 degree path a little longer, which sends it around the 14 ball. And if we put both shots
together, we can see how they both take different paths due to the angle of each shot. Learning how
to change the angle off the 90 degree path using topspin is extremely powerful. In this 8 ball
game, I have very little angle on my last ball, the 1 ball. The 90 degree path will send the 10
ball in this direction. At maximum high, we'll send the 10 ball into the 12 ball. If the 10 ball
has very little forward rotation by the time it strikes the 1 ball, it will be sent in this
direction. So on this shot, I'm going to aim just below maximum high with a firm stroke. And now the
10 ball is sent along the correct path. In this 8 ball game, I need to land here for an angle on
the 2 ball, so I can play position for the 8 ball. The 90 degree path heads in this direction,
and a maximum high shot will send the cue ball here. So on this shot, I'm going to aim between
center and maximum high, and the cue ball is sent along the correct path. Developing a feel for
stun follow shots will have a dramatic impact on your pull game. Let's return to this shot,
and examine the stun draw shot. Earlier, we learned that shooting above center at an angle
causes the cue ball to slide along the 90 degree path momentarily, before the top spin sends it
forward toward the rail. And the same thing is true for low spin shots. I'll first shoot this
shot with maximum low, and we can see it slide along the 90 degree path before the low spin
pulls it toward the side rail. This time, we're going to aim between center and maximum low,
and shoot at the same speed. Since we're not aiming as low on the 10 ball, it will have less
low spin on it by the time it strikes the 1 ball. Once again, the 10 ball slides along the 90 degree
path before the low spin propels it toward the side rail. Since it has less low spin than the
first shot, it strikes lower on the side rail. This time, I'll aim with just a tip below center,
which means when the 10 ball strikes the 1 ball, it will have less low spin than the first two
shots, which sends it even lower on the side rail. So if we put all three shots together,
we can see that they all slide along the 90 degree path before separating due to the differences in
amount of low spin each one has. A stun draw shot allows you to send the cue ball anywhere
between the 90 degree path and the maximum low path. So just by controlling how much low spin
the cue ball has when it strikes the 1 ball, I can send the cue ball to any location in this area.
Both stun draw and stun follow shots take practice, since where you strike on the cue ball has to be
in sync with your speed. So spend some time on these shots so you can develop a feel for them.
So when would a player use a low stun shot? The low stun shot is similar to the stun follow shot
in that the player can control the direction of the cue ball off the 90 degree path just by
controlling the amount of spin the cue ball has when it strikes the object ball. For example, in
this 8 ball game, I'm on the 1 ball and I need to play position for the 8 ball. A maximum low shot
slides along the 90 degree path briefly before the low spin sends it into the 14 ball. If I
slightly reduce the amount of low spin the 10 ball has when it strikes the 1 ball, now it moves
around the 14 ball and travels toward the end round. And if we put both shots together, we can
see that they both slide along the 90 degree path before separating due to the difference in the
amount of low spin each one has. In this 8 ball game, I need to play position here for the 8 ball.
I'll first find the 90 degree path which heads in this direction. A maximum low sends a 10 ball to
this point on the side rail. So now I know that if the 10 ball has very little low spin when it
contacts the 1 ball, it will be sent along this path. And too much low spin sends it in this
direction. On this shot, I'm going to aim between center and maximum low. Once you can develop a
feel for where the 90 degree path and the maximum low path are, you'll then know exactly how much
low spin will be needed to send the cue ball along the correct path. Here's another example of first
finding the 90 degree path, then visualizing the maximum low path. So on this shot, I'll aim between
center and maximum low, and the cue ball should be sent toward the position area.
We'll be going through more examples, but first here's a drill that will help you develop a feel
for the stun draw shot. In this first shot, we're going to play a stop shot using a tip below center.
On the next shot, I'll be drawing back half a diamond. And once again, I'll be aiming a tip
below center, so I just need to increase my speed a little bit from the first shot. And finally,
I'll be drawing back a full diamond using maximum low. Once you complete each shot, move the object
ball to the next location. Once again, try to complete all three shots. Go through each of
the shots once, and the next time you go through the drill, try to get through each shot three
times before moving on. It may take a while to get through this drill the first time you try it,
but stick with it since it will definitely improve your stun draw shots. You can also add more shots
to the drill. For example, on this shot, the goal is to draw back three diamonds landing close to
the sticker. If there's any shot in pool that demands practice, it's the draw shot. So make
sure you set aside time to practice this drill. In this game of eight ball, I'm on the one ball,
and I need to play position for the eight ball. A sliding cue ball heads in this direction. On this
shot, I need to perform a stun draw shot, so I need to determine how much low spin I need to use.
On this first shot, I'll use maximum low, and we can see it slide along the 90 degree path before
the low spin pulls it toward the side rail. So maximum low won't work for playing position on
the eight ball. Since I need the 10 ball to travel close to the 90 degree path, I'm going to strike
the 10 ball a tip below center, and now it travels along the correct path. Since it has less low spin
than the first shot, it is sent further down the rail. And if we put both shots together, we can
see them slide along the 90 degree path before separating due to the difference in the amount
of low spin each one has. How long the cue ball stays on the 90 degree path depends on the angle
of the shot. On this first shot, I'm going to be shooting the one ball from this angle, and we can
see it slide along the 90 degree path before the low spin propels it toward the corner pocket.
Now I'll give myself a little more angle on the one ball, and this time the 10 ball slides for a
distance before drawing back to the end rail. And finally, I'll give myself even more angle,
and now the 10 ball slides all the way to here before drawing back to the end rail.
Here's a shot with even more angle, and we can see that the 10 ball slides all the way to this point
before the low spin sends it toward the end rail. If you want to reach a high level, understanding
this concept is extremely important. On this shot, I need to play position for the eight ball.
Due to the angle in the one ball, I know that the 10 ball will slide several inches along the 90
degree path before the low spin sends it toward the side rail. So I can shoot this shot with
maximum low, and I should have my position for the eight ball. Here's a common situation where a top
player would use stun draw to create their shape on the eight ball. On this shot, if I use maximum
draw, the 10 ball is sent in this direction. Now when I pocket the one ball, the goal is to strike
the side rail between the 90 degree path and the maximum low path with right spin. Understanding
how to control the cue ball off the 90 degree path using stun draw or stun follow is one of
the necessary skills every player has to develop in order to reach a high level in pool.
