Art deco veneer disaster!

Antique Art Deco
12 followers
13 Video Views·May 9, 2026
How does a piece of furniture end up this way? Neglected and ready for the dump this vintage vanity was one step away from oblivion. Join me as I tackle missing veneer, warped wood, gouges, scratches and a host of other problems!
AI Generated·May contain errors
Sometimes you snag things off a Facebook marketplace for free and you're all excited for scoring
something for nothing and think I can do this and then you bring it home and you have a good
hard look at it and the realization of what you've just done sets in and your mind gets stuck in the
what was I thinking mode. But what better piece to challenge myself with for the $2,000
before and after furniture challenge that is being hosted by the Furniture Squad community.
The challenge is essentially a bunch of furniture refinishers slash restorers who will be publishing
a video on the weekend of December 6th and 7th. Everyone watching is encouraged to vote for their
favorite project and the winner will take home the grand prize. And the bonus is everyone who
votes is automatically entered to win a $100 Amazon gift card. I'll link all the channels
participating in the challenge in the description below and also the instructions on how to vote.
And lastly if you are at all interested in refinishing furniture I encourage you to join
and become a member of the Furniture Squad. It's a community where refinishers like us share projects
ask questions and learn together and until January 7th you have a chance to win a $300
refinishing tools slash supply shopping spree if you join. So check out my link for the Furniture
Squad in the description section below. And now finally on to the task at hand.
Okay first step. Determining what the problems are. Problem number one missing veneer. Must do
something about that. Options are I can replace the veneer. Another option is I could just paint
the top. So I'll have to think about those two things. Another problem is there's no mirror. So
do I look for a mirror that might fit and see if I can find a cheap one? Do I go pay big bucks and
get a mirror cut for it? So that'll be something I have to think about. Another problem is all the
missing veneer on the various door fronts. So there's a piece there, piece there, little pieces
along this edge. Again at this point I don't know do I just try to repair those or do I have to
re-veneer the whole fronts to be determined. And the veneer on the saw insides of the desk,
on both sides, are cracked like that. So to be determined whether I'll be able to glue it
or not. I have glued stuff like that in the past and it's worked out so I'm keeping my fingers
crossed. What else is wrong? Surprisingly enough the drawers slide in and out fairly
good. You know like well okay so maybe that one's a little squeaky but it's they're not stuck you
know they they all pull out. So that'll probably be okay to fix. That won't be a big fix. I've got
some wavy waviness happening at the bottom here. Again I don't know if you can see that on camera.
I like the little middle piece here that's kind of cute very art deco-ish and it's got the same
thing on the bottom mirror which is kind of nice. So all in all I like this piece. It's
going to look gorgeous I think if I can pull it off. That's the million dollar question.
But I'm confident I've done you know a buffet like a buffet that was in as bad shape as this
and it turned out beautiful. And I did that buffet about a year ago. I'll post a link somewhere in
the description or on the screen so you can see what I did with that one. But this one should be
fun. Let's get to it. There goes another piece of the veneer. To fully appreciate the shape that
this veneer is in let me show you a close-up. I'm going to try scraping the finish off. It looks
obviously like it's failing. So I'll see how scraping goes.
Oh yeah. This is definitely the right choice. It's just coming off like butter.
Some of you might be wondering why I just don't sand right off the bat to get rid of the finish.
And part of the reason is, I don't know if you can see it but I think you can,
this is how thin the veneer is. It's quite thin and I'm going to have to be doing quite a bit
of sanding. So if I can get the finish off by scraping it off and then sanding after that,
I think that will help save the veneer. So that's my reasoning. I am almost at 10,000 subscribers
so if you'd like to help me reach that milestone and you haven't already, please subscribe to my
channel. Likes, comments, hypes all help with the YouTube algorithm so they're greatly appreciated.
Thanks for tuning in. If I can remove drawer bottoms I always will because it's so much
easier to sand the inside of the drawers without the bottoms in. The drawer runner on this one
in particular was cracked and I'll have to glue it back together so I'll be removing it as well.
Now the first drawer slide I've taken off of the first drawer I'm refinishing has a huge crack.
All along here and here so I'm going to fill it with glue, clamp it and put it back on the
drawer. I've already sanded it so it's cleaned up. I'll put the glue on and reattach it after.
Just put it along the crack here and then I will open up the crack and just move it around so the
glue falls in. Looks like it's pretty saturated. I'm going to do the same thing with this big
crack here. When I squeeze it there's lots of squeeze out so it looks like the cracks are
saturated which is what I want. The first drawer is done. I've sanded it to 150. I cleaned out
all this. I hand sanded this because I couldn't get the sander in but it's nice and smooth.
What else did I do? I did the inside and out. I did the bottom, both sides. The slider here
is being glued up. I'm going to wait till I sand all the drawers down and then I'll start
patching the missing veneer pieces. See where I'm at with that. Three more drawers to go.
So far I've taken apart three of the drawers. This is the last drawer and you can see how
this has come detached and there's a crack in this one as well. Just like the other drawers
I'm going to take off the bottom of this one. It makes cleaning it so much easier as well so
that's another bonus. Okay let's see if I can get this out.
There's a crack there so I'll glue that back. There we go. There we go. Now you can see why I
was having such a hard time getting the bottom out. All the pieces that were laminated together
had come apart so I am going to fix that with a bit of glue. Glue can fix anything. Pretty much
all the drawers with the dovetail joints have to be re-glued. They're all loose.
I'm trying to first just see where all the veneer is loose here. I'm gluing all that down first
just because it's very delicate and I don't want to chip more veneer off which I already have.
So I'm gluing all the fronts down first and then I'll address the dovetails. Okay I'm going to
tackle the top of this and I think what I'm going to start with is 80 grit sandpaper on my
larger Makita sander. It's a bit more aggressive than the surf prep and since this is solid wood
I don't have to worry about ruining the veneer because somebody else doesn't ruin the veneer.
So I will just try to get all the rest of the veneer off with the 80 grit and see
see where it's at after that.
I've got a little piece of walnut veneer here. As you can see it's missing from this side so
it's not exact match but I think I'd be able to color match it after. So what I'm going to do
is I'm going to overlap it. These darker lines here I'm trying to mimic there's some darker
lines in this piece so I'm trying to make sure they're going in roughly the same direction.
Looks about right. Tape it down and I'm going to put a ruler on it and just cut it and I'm
going to cut through the top and the bottom so they're perfectly matched.
I'm unclamping the one of the sliders or the rungs that I glued up yesterday.
Looks good. Crack was all the way down here but it's solid. There was so much damage on the
fronts to the veneer. Every time I thought I was finished I found more stuff to repair.
In retrospect I maybe should have just re-veneered them. On all the repairs of the lifting veneer
that weren't along the edges, and there were many, I used CA glue that was water thin and used a very
thin applicator tip to saturate the void. Then I taped it down. It didn't make it magically disappear
but after sanding it smooth there was no worry about it catching on something and lifting again
and that was the main objective. Scraped and sanded this area and you'll see here I haven't
done that yet and I've got four of them to do. One, two, three, four. Now I'm going to start
gluing all the side veneer. This one's probably the best. Some of the sides are way worse than
this but I'm going to inject some glue in here and clamp it down and see if we can't fix this
crazy veneer here. I've got the vanity upside down because I'm going to let gravity
help the glue slide down here and along here before I clamp it. This is my clamping job on the
first side of the outside of the vanity. It was bubbling just along this side here and just where
you see the pieces of tape. So I've clamped it down and hopefully that will do the trick.
I've taken the clamps off of the first side that I glued last night and over here it's nice and
smooth but here there's still a little bit of bubbling. I don't know if you can see it here.
Let me turn the light off. I'll see if it works better with the light off. Let me see. There you
can see it right there. See the bubbling? So what I'm going to do is I'm going to wet the side down
and use a hot iron to see if it will melt the glue because I know I got glue in there
and see if that helps. Yeah that's a lot better. Perfect? I don't know but a lot better.
Now this veneer on the inside of the desk is really really warped and bubbling. It's got a
crack here. The veneer is quite nice so I'm going to keep it but it needs to be glued back down.
There's all bubbling up here. It looks like this section right here is pretty good.
There's still glue adhering this part but the glue here is totally let loose.
But because it's so dry and warpy and it's just brittle, I think I'm going to wet it first just
to try to get some moisture into it so it will move. Well it has flattened out the parts up here
like it's great because this was all bubbling so there must have been glue left here because it's
it's definitely flatter. This part here is still lifting. No glue left here but that's okay
because that's the easy part down here to glue. I was really worried about this part here because
with so many ripples in it but it looks really good now. Off camera I glued the whole edge of
this drawer all the veneer down because it was all coming off and I patched it with wood filler.
I'm happy to report that all the warping veneer on the outside edge of this corner is all flat now
and it's good to go. The power of wood glue ironing and clamping is truly amazing. The
I'm going to add a little bit of wood filler to the large crack which I will color match later.
I am using epoxy putty to fill in all the little gouges on the top of this piece. There's tons of
gouges. I am going to fill the gouges because I've got to lay down some veneer and it has to be nice
and smooth. This rust remover is good stuff. I put all the screws and metal feet in the solution and
let it sit overnight and it eliminated all the rust. So I highly recommend this product. A bonus
is you can put the solution in an old jar and you can use it over and over again so it lasts a really
long time. Now I've been sitting on the indecision fence for a long time on whether to include the
mirror with this vanity. I have sold some in the past where the person buying it wanted to use the
vanity as a small desk and they didn't want the mirror. But part of its appeal to me at least
is that vintage feel that comes with the mirror and vanity together. So I'm going to go ahead and
refinish it but with a slight twist so stay tuned. Here is the piece of wood that the mirror gets
attached to. I've already taken off the top piece here. It was held with glue and dowels and the
reason I did that is because I could not get the right size mirror for it that would fit. I could
if I got it custom made but I'm not going to spend the money on a custom made mirror for this vanity
because it'll never realize the money I would have to spend on getting the mirror cut for it.
So I found a $15 mirror on Facebook Marketplace that is round 24 inches and it's beveled on the
side so it'll look really nice. It's just a little bit small. So I've come up with an idea to make the
mirror look like it fits. It wasn't sitting in this space evenly so I'm going to have to shim it up in
here in order for the mirror to be even on both sides but that shouldn't be a problem. I'll just
cut a little bit of this veneer off and glue it there and nobody will see it and it'll work fine.
And I'm thinking that the dark is going to go better on the trim pieces which are very light
wood because the the veneer that's on the drawer fronts when I wet it down to see what it looks
like with a clear coat on it's very dark so I don't want the drawers to be very dark and the
trim to be light so I'm going to go with the darker stain on the trim. I've decided to just paint it
on without wiping it off. I wiped it off on that one and I don't like the way it looks. I prefer it
more opaque like that so I'm just going to paint the stain on without wiping it.
So the time has come to put on the new veneer. I was recently watching an old episode of AT
Restoration and I decided to try his technique for adhering veneer with PVA glue. I've included a link
to the video in the description. But essentially it is applying the glue to the underside of the
vanity top letting it completely dry and then ironing on the veneer to the vanity top. I'm keeping
my fingers crossed that it's going to work. I haven't used this technique before. Okay the moment
of truth. The glue is dried on both the back of the veneer and on the vanity top and now I am going
to attempt to iron it on. So I've made a little mark to where the middle is. I'm lining up the
seam. Iron on the veneer. I'm going to try this see if this works. After a lot of ironing I am
finally happy with the way the veneer is looking. No warping or bubbling. It seems rock solid.
Now I'm going to dampen the veneer tape and remove it before sanding.
I'm polishing the handles up. This one they've all been cleaned. This one has been sanded with 320 grit.
As you can see they're not solid brass. They've got a bit of tarnishing on the middle of several
of them. So what I'm doing is I'm just taking the sandpaper and scuffing them up just to make sure
that this little section here is as smooth as the rest. And then I'm going to use some rub and buff
on them. Off camera I've applied a water-based sealer to the wood and I did this because often
light colored woods and dark stains tends towards blotchiness so this should help. I originally was
going to leave the drawers just their natural color but I've had to do so many veneer repairs
that I'm going to try to camouflage them with General Finishes stain in the color
Antique Walnut. I opted for the gel stain instead of the other water-based stains I used on this
piece because I did a test piece on the drawer front and I just like the look of it better.
The more I play around with mohawk blendel sticks the better I get. On all the veneer repairs I used
various colors to blend the new veneer with the old. I would work on it a bit then spray it with
vinyl sealer and once dry work on the color again. I would repeat these steps over and over again
until I was happy with the results. One thing you have to do often is stand back and look at the
color. When you work with something really closely your color sense kind of gets wonky. You really
need to view it from a distance that most people will be looking at it. Trust me this tip will make
your life so much easier. Okay here's my idea about what I am going to do with the mirror.
As you can see what I've got in my hand right now I've taken that off and I've sanded it round and
I'm going to place it back into the frame part here and I'm just not going to bring it all the
way to the top. I'm going to bring it down and what that's going to do is it's going to kind of give it
a look of cat ears what I call cat ears those little things sticking up. Now I could have cut
it down I have the saw you know the jigsaw I could have done all that but when I put the mirror on it
when it looked like this I thought it looked pretty cool so I'm going to leave it like that.
It's going to be different but I think it'll look good. Just trust the vision. After I have it set
up on the vanity at the end let me know what you think in the comments. Should I have cut the ears
off? I mean I could have. I still can before I sell it. Let me know. Oh my god this was a long haul
but I managed to pull it off in under two weeks and that includes the editing of this video.
Nothing like a before and after challenge to motivate you to finish. Thanks to Jamie at
Furniture Squad for hosting this challenge. It was a lot of fun and I can't wait to view all the
other channels and their projects. Everything you need to know about the challengers and voting is
in the description section below. So sit back and enjoy my before and after and I'll see you next time. Bye!
