Jay's Dream Car: This 1967 E-Type Restoration Fixes Everything | Jay Leno's Garage

Screw Driver
87 followers
#car #automobile #business #consulting #salesagent
Jay Leno is finally driving the car his own collection piece "is supposed to be"—a spectacular, numbers-matching 1967 Jaguar E-Type Fixed Head Coupe (FHC). This beautiful Series 1 example was meticulously restored by David Lane of the Fast Lane Rod Shop.
Watch Jay take this Opalescent Silver Blue fixed-head coupe—a two-and-a-half-ton car capable of going 150 miles an hour —for a drive to see why, even after three years of work, this restoration was worth every minute.
Shop car care and detailing supplies from Jay Leno’s Garage: https://www.lenosgarage.com/shine
AI Generated·May contain errors
The trust right there, it's kind of an unusual thing because I was a modified guy my whole life
and now I just appreciate seeing one that hasn't been messed with yet and want to hide it from
anybody because it's so special that you know this is how it came off the factory right here you know.
Yeah it goes great all kinds of power. Welcome to the episode of Jay Leno's Garage,
the car we're featuring today, a 1967 Jaguar XKE. This is the car my car is supposed to be.
I have a white one, a 63. It's pretty original but it leaks oil. David Lane, this is his car.
He owned Fast Lane Rod Shop, yes, Fast Lane Rod Shop in Iowa, quite famous in that part of the
world and I've met people over the years who've done his cars and as you can see he does immaculate
work. He took an XKE, this is exactly what I would do or hope to do sometime, go through it and just
fix every little thing. This is not heavily modified. There's no small block Chevy in here
or a five-speed. It's all Jaguar but it's just done the way, well, the way the factory should
have done it. It's just a beautiful car. He'll go into the details with us. David, come on in. David
Lane, here we go. Hey, beautiful job. This is just great. Thank you. It's so funny you're known for
building hot rods so is this a big departure for you to go into sort of an exotic? Exactly. It was
completely the opposite of what I've been doing for the last 20 years but really a fun challenge
and like I said it was just completely different. It is because when you work on an English car
you realize we're two countries separated by the same language. Everything is different. You know
when I got my first English car as a kid, I'd read the English magazines. I'll get a good set
of spanners. Spanners? I've been out of the Craftsman Sears. You got spanners?
Now I don't know what those are. What are you talking about? Wash the parts in paraffin. So I'm melting
candles. How does this clean anything? You know, just everything meant something else.
It's just a fun time but I'm just so impressed. Is this a Jaguar color? Yes, it is opalescent
silver blue and dark blue interiors pretty much and so that's why it's kind of based on a
restoration of doing the car and I wanted to go with the actual colors that the car was.
Yeah because I have a Jag we found across the street that was parked in the mid-60s and just
left there and opalescent was the term they used. Mine was opalescent sand. Yeah so opalescent seemed
to be a popular phrase for the English cars. 67 was the very last of the first series one.
Exactly. And this has a 4.2 liter motor. Mine has a 3.8. This is probably the best because by this
end of the first series, I think that's the Jag everybody wants. Later when they made it a 2 plus
2, I didn't like that and just rocker switches because of safety and it just had
just a lot of things that I thought detracted from the car. But it is one of the few automobiles
that I think the coupe is sexier than the convertible. Especially when you see how this
rear door opens. It's fantastic. Well where should we start? Should we look under the hood?
If you notice the gas tank door on the back fender, they had a little finger pull on them
and not that that was a big deal but when you looked at the side of the car, it was like what
is that little bump right there? So flatten that out. I took the bumpers and if you remember on
these cars, there was like a big rubber kind of a gasket or filler piece that was between the bumper
and what I did is I welded these bumpers up so that I could gap them to the body and they would
fit a lot nicer without that rubber. So they fit nice. Just don't bump anybody. Exactly. And then
of course these were two piece here and there was an upright and I took the uprights out and then
welded this together, metal filed it and then the bottom side, there was access ports for the bolts
to tie it to and I welded all them shut. So if you look from underneath, it's all nice and clean and
body fit also. And beautiful glass covers here. Yeah that's what's so nice about the
Series 1. Like you were saying, when you go to the Series 2, then they took away the covered
headlights, took away the neat switches. The regulations came in and what was
designed started to leave. Yeah, yeah. And when you were talking about the book and trying to
read the different, you know, I had to do the same thing. Would you believe this is called the scuttle?
Okay, now you know how long it took me to figure out the cowl is a scuttle now, you know.
And so every time I started going through this book, because I mean basically it was a running
driving car, I had to take a completely, you know, every nut and bolt. As you're doing that, you're
trying to go through the manual, making sure that you're doing things right. And I'm going
back to Google and trying to figure out what are they talking about. It's the same thing that you
were saying. The whole car was filled with that. And you have a combination of British thread
and Wentworth thread and even metric insert. You know, what I'd found in this car at least, and
being it's a, you know, a later 67, that the majority of the bolts in the car were like 5-16
fine, which is not super unusual, but kind of unusual to have a car full of that. Fine, yeah.
And I really didn't run into the Wentworth thing. I think there was, I think there was a few bolts
and I can't remember what they were for, if they were tied to the engine. But the majority of the
car was all standard sizes. That's interesting. And I was just sure I was going to run into this,
you know, now we're dealing with metric and a mess of everything, you know.
How'd you make out with rubber around headlight seals and that stuff? Yeah. Did you get that
from England? Did you have to cut your own? How did it work? No, there was, I found, you know,
SMG was a good source. They really carry a lot of parts. But when it comes to rubber and stuff,
there's a guy out of Canada that supposedly like makes the best rubber. And I think he worked for
them at some point. So he knew the original patterns, the original diagrams. And then he
had a really good way of making a really soft rubber. So I found, I bought a bunch of SMG stuff.
And then as I'm putting this car together, I found that guy. And then I realized, oh, okay,
I can get better hood seals and better, you know, that kind of thing. And so, and then some parts
came from England. Is this the original glass or new windshield? It's not, it's not, that's new
glass. Although that's great. I mean, it's how many miles are on this one? Well, I just finished
at the end of October and I've been doing some driving, but there was, I went to the
Grand National Roadster Show. So I wanted to try to keep the car fairly fresh for that.
So right now I think I got about 400. No, but when you, when you got it, yeah. Was it, I mean,
was it worn out or was it all right? It was, it was time. It was, it was, I actually, I bought
the car and bring a trailer. And as I was looking for one and like, like your favorite cars,
they're kind of like the preservation cars. That's what I was honestly looking for. Like a one owner,
you could just, just take care of the car, pamper it and enjoy it. And as time went on,
not only was I not finding that car, but the prices in October, you know, in 2021 and 2020,
they were climbing. So as I'm watching the prices climb, they're getting a little further out of
reach and out of reach. And then I panicked, bought a car and I thought, okay, I'll just redo
it. It's better than not getting one at all. Well, so many of them got sold for $800, $900.
I've told this story before, my friend, Greg, when we were in high school,
he bought a convertible. It was like all the money he had and it was just nothing but problems. And
he thought, you know, I'm going to burn it for the insurance money. So we drive out to Pomp's Pond,
was the pond near Andover, Massachusetts. He puts gas in, he throws a match to it. They go,
he stands back just as the cops come down. The cops go, Greg, what are you doing? What happened?
You know, you're not going to try and get your money for that, are you? No,
no, no. I just got fed up with it. All right, well just make sure,
have somebody tore it out of you again. The car was nothing but a headache, cost of money. And
then at the end he thought, well, I'll get my $800 back. And no, they burned it up.
It wouldn't even burn good. When we come from a small town, the cops know everybody,
because you set your car on fire, you're going to get arrested. Oh, Greg, what are you doing?
You're not going to try and cash it. No, no, of course not. Stupid, yeah. Are these the stock
wheels or do you have a little wider wheel? The wheels and tires are basically the Jaguar
recommended racing setup. So what they are, if you notice the lacing are different front to rear.
Yeah. And they're five and a halfs in the rear and they're five inches wide in the front. So a
little wider in the rear. And then these are Dunlop racing tires, the ones that you would
actually, you know, go racing with back then. Right, right. And you know, they're a little less
than ideal. They'll flat spot sit in a little bit. Yeah. But the look is exactly, you know,
it's the painted wire. I was trying to build a car that was, you know, a nice looking car,
but had a little bit of either racing or road race or something, a light tone of that.
No, it looks great. It's exactly what I love. You know, that had, those are 16s and they flat spot
like. I thought, did I run over a brick or something? I mean, it was like, like there was a
cam in it. You had to go out and really take it out to 70, 80 miles an hour for maybe 25 minutes
to get some heat back in them. Get some heat and then you start running. And of course the three
wipers, always very sexy. You know, when you're a kid, three wipers. What does that mean? I don't
know. It just seemed cool. And the same way Corvette had the radio this way instead of this
way. Remember it was up and down. So when you're 13, this is the car that really made the impression
on me. You know, Enzo Ferrari called it the most beautiful car in the world. And it's really true.
It's just that they were, they were so cheap. You know, they built so many of them and people
who bought them couldn't afford to fix them. So they all got just driven into the ground
and it's a shame. And now when you see them at $200,000, you know, it's pretty crazy.
And what's really, to me, what's so unusual is, you know, they're basically the same
car, 61 through 67. Well, like I have a 63 Galaxy. Okay. And when you park that next to this,
you think they both could have been built in 63. The Galaxy was built at Ford and this was built
in Mars. I mean, you know, it's just, there's so, and you got to think they had, you know,
torsion bar front end, independent rear four wheel disc brakes. They were a heck of a car.
Kind of for the money. You know, they weren't the high end car that they were kind of compared to.
The Aston Martin was like twice the price. And this seemed like you got more car for your money.
That was always Jaguar's thing. It was great value for the money. You got twin overhead cam in 1948.
This engine went all the way through to the 2010, you know, something like that. It's like
small box Chevy of, of England. Yeah. Just, just fascinating. Boy, it just looks great.
And the interior, I like all the detail work. Well, thanks. That's, that's where things changed
is, is I wanted to do a restoration, but when I looked at the interior of the cars,
they didn't seem to match what the exterior, the futuristic racing look. And so, you know,
I wanted to do some things that would kind of like if the designers weren't held back by the
accounting department and they got to do what they wanted to do. And so there's, you know,
there's a lot of small things. I just took the gauges, I put a chrome bezels on them. I put
a dome glass on them instead. And the dash face would be normally all material covered,
vinyl covered. And so I took and kind of cleaned them up and then painted them. The whole center
console is basically the lower half. That's all just handmade. I made all that and then put the
different armrests in it. Now, did this have the aluminum plate all the same? This one didn't.
This would have just been all material covered. The aluminum plate, those look so good.
Yeah. And you have the, what, what are those two, the stopwatches?
Yeah. You know, when I was, when I was looking at, you know, cause there again,
I'm learning about a Jaguar really fast when I'm getting ready to build this car then.
And I noticed a couple of them had that and I went back and looked and they were using like
in rally racing and stuff. So I thought what a perfect, cause that was kind of the feel I
wanted you to have. And you saw the car and what was the name of the gate? Yeah. Yeah. That's right.
Well, it's now tag here, but it was here back then. Exactly. And of course the full down rear
here, which is just great. Yeah. There's just so, they're so neat inside the, and then I made the
sill plates and the armrests, the armrests are basically the same shape as what the factory one
would have been. Right. But I took a, and kind of made some different, actually they're, they're
like 62 Corvette and, and I put a bunch of them together. We printed a plastic armrest. And
beautiful kick panels there on the. Thanks. Right here. Was, was, were these like this from the
factory? It didn't cover the whole. Vital. Yeah. Just fine. That's what I thought. Yeah. That looks
great. And that was the idea. I thought I'd do something like that and it just make it a little,
a little more richer. And these arms, armrests, they're very nice. I'm glad you didn't put
electric windows in it. I just, exactly. Yeah. It's still, you know, it's still the 67 Jaguar.
Yeah. Very nice. Can we open up the hood? Sure. Let's see. I can get embarrassed how awful mine
looks. Nice and easy there. Cause it will touch. There we go. There we go. Very nice. You got the
gold head. Yes. Right. Right. And that's questionable if that's supposed to be gold or
silver. I'm not quite, I always, always assumed the 67s were silver, but the place that redid
the motor for me, um, that's called vintage Jaguars. They're in, uh, in Idaho and Blackfoot,
Idaho, and they've been doing it forever. Um, they had insisted that the gold, the head should be
gold. So good enough. And it's basically a stock edge. I wanted, I wanted reliability out of it. I
wanted to, I want to plan on driving a car a lot. It does have an aluminum radiator. It's got a
kind of an upgraded fan. And, uh, to this point it, it doesn't run hot. It's, it's really a
pleasure in that. You know, mine still has the one I pulled out, uh, still has a two baby,
a two bladed fan and it runs very cool. Does it really? Yeah. It doesn't work. And that,
is that the stock alternator? Alternator or generator? Alternator. It was an alternator
in 67 and mine was a generator. And beautiful job porcelain on the, uh, on the headers there.
Very nice. Yeah. Those are pretty. And you got, these are all the pieces. People forget
the phenolic material here. Stock carburetors. So basically you've got the Barbersol and the
windshield washer. And this is, you know, in a 67, this was a plastic tank, but the glass ones
are so much neater looking. You gotta go with the glass. Yeah. And that you try to polish up a few
things, but really try to keep it as close to original as possible. And all of this stuff was
so confusing. Okay. Oh, this is negative earth. Was it positive earth when you got it? I think
no, but I think, uh, the earlier ones were. Yeah. They were positive earth, which is like,
what? That didn't make any sense when you grew up on Fords and Chevys. Now you said you had what,
a 63 Galaxy? Yes. And what more did he have in that? Well, that's got a, like a new, it's got
a 427. Oh, very nice. Uh, Robert Pond built that. Oh, 640 horse and 600 foot pounds of torque.
Those are great. Yeah. Hustles. Just a big heavy tank. Yeah. But boy, that's fun car. Oh yeah.
That's great. Well, that's my seven liters. I saw that. Yeah. Very cool. Very nice. Yeah. The only
thing I replaced on mine is the, the tank, the radiator overflow tank rusted, had a hole in it
because the guy parked it with fluid in it. Yeah. But boy, beautifully done. Look at that. Well,
we put, I put new engine frames in it to really try to basically build the thing for another,
you know, tons of miles. And these were built, never be taken apart to replace the rear main
seal. You got to pull the whole engine out and disassemble it. That's a big deal. You know,
I have a Vincent Black Shadow motorcycle. It says for the owner, the thousand miles,
take engine out, disassemble, check everything, reassemble. It's just, Oh, it's just, it's just
three steps. Take it out, disassemble it, check everything and reassemble it an hour, an hour
later. It's just so funny. Yeah. Yeah. Boy, it's just a, just a beautiful job. Thank you.
Have you taken it to Jaguar meet? You know, we did when I first got it done. There's one in
Scottsdale and went up and actually it was really pretty cool. Uh, I was a little nervous
because I, you know, there again, I'd kind of modified a little bit and didn't know if, uh,
how that was going to go, but there was roughly, um, I think it was 40 somebody types there. Yeah.
It was really neat to see that in a parking lot. It's just a, an unusual site. Yeah. Yeah.
And this really was the performance car with the Corvette and even the music,
plenty of stingrays and XKEs. And you know, it gets funny, you know, it's all part of the culture.
Well, I had seen one when I was growing up in Texas and there was one on my way to school and
I'd walk to school and think it was sixth grade and it was in a, at a rundown hotel parking lot,
kind of at the end, you could tell deserted, left it and really a rundown beat up car,
but you couldn't help but notice that is so different. And I was a Camaro guy and that
kind of thing. And I like muscle cars, but that caught my eye. Yeah. Yeah. Yeah. When I was a kid,
I've told this story. I was nine and I'd walk up the hill and a guy I thought was an old man
had a XK120. He let me sit in it. Well, that was the first guy I bought when I got,
I made some money in XK, you know, and it's so funny. And I contacted the guy
like 40 years later, like when I was nine, I thought he was like 50. He's 21.
When you're a kid, you just think everybody, it just made me laugh. I said, how old are you?
He goes, I'm a 71. This is like 10 years. I, well, I, you're one of the nine years old I am.
I thought you're an old man. That's very funny. Now to me, the sexiest thing, let's put this down.
Okay. I'll let you do it. There you go. Sure. It'll, it just, do you not have a, you have the
I'm going to, I'm, I'm looking at designing something a little bit different because
they're kind of clumsy. Whenever you go to open it, you got to try to reach it.
Put your finger in there. Yeah. Yeah. And push it easiest. If you push this corner,
push this down just a little bit. Oh yeah. Right. Right. Okay. There we go there and turn it to the
right. Yeah. This is the greatest thing this year. Yeah. There you go. Yeah. That that's just the
Do you have the toolkit? Uh, I don't have it with me. Yeah. Yeah. It's at home. I forgot to put it
in. Yeah, no, that's all right. Oh, nicely done. Yeah. Sid Shavers. Uh, do you know him? No, I
don't. You know, Roy Brizio. Oh yeah. Roy Brizio. Sid does all Roy's, his cars, his interiors. And
he did this interior for me. He does such nice work. Beautiful job. Yeah. He, uh, you know,
they didn't fit all that well in these cars, the interiors didn't. And so there's a lot of
tweaking and stuff you got to do to make them, you know, the fit and finish like that. Yeah.
The factory was, you know, a guy knew his father bought a Jag sedan in the fifties. He would press
the brake. It would go to the floor. He pressed it and it'd be fine, but he had to pay the break
twice because it would always go. So he took it back to the dealer. Oh yeah. I'll take care of it.
Comes back a week later. It's a little red light on the dash. He presses the brake and the light
comes. The guy goes, yeah, when the light comes on, you hit the brake again. I didn't fix it.
They just put a red light until you hit it. It really made me laugh. I said, okay, just beautiful
stock exhaust system. Yes. Yeah. I can't wait to hear it. Oh, and you got the E-type license plate.
Yes. How'd you get, it seemed like somebody would have grabbed that. Well, yeah, that one's,
that one's questionable. That's kind of on there as a show plate more or less. Oh, I see. Okay.
And then, uh, we did take and fill same thing with the bumpers here. Yes. Beautiful. Aaron,
Aaron Jerger did that for me, made these, these end caps and we welded them on and took the
uprights out of there too. How long did it take you to do this? A year? Well, no, it was, it was
just about a three year deal. Oh wow. See, the difference was, is back in the day, uh, you know,
I did all the work myself on every car and I had complete control. Well, when you're like,
I didn't do the body and paint. So when you start sending things out, then you're kind of at the,
the mercy of timeframes are a little bit different than, uh, than if you're doing it yourself. So
I know there's nothing more frightening. I've had this happen to people. They send a car to
restoration shop, the guy goes bankrupt and they can't get the car out. Yeah. You know,
it's got to get sold at auction or I don't know how that, well, you think it's yours, you own it,
but you sent it to the guy. You don't have, you know, it's not an unusual story. Yeah, no,
it's a frightening one. Yeah. Very cool. And another, one thing I didn't point out,
I don't know if you saw this little emblem right here, where this little emblem on the, I've made
a glove box door and we had printed that emblem. It says E-type printed out of stainless. Let me
see. Um, Corey Talbert did that for me. Such a talented kid. And, uh, and trying to make that
there again, if you didn't know any better, you'd think that was just the factory emblem. Yeah,
I would. I think I, yeah. And that was kind of the goal of that. And there was a glove box there,
correct? Well, that actually was like a cubby hole. Oh, that's right. Yeah. That's it. They
didn't have a door on it. Later on, they made doors for them, but I went ahead and made that
because I just felt like it finished off that dash a little better. And no air conditioning,
right? Nope. And you're in Arizona. Yep. I probably probably won't drive it a lot coming
June, July, August. Right. Right. But the rest of the year or whatever. Oh yeah. Yeah. That's great.
Well, can we take her for a ride? Oh, absolutely. Oh, this is exciting.
This is what my car should be. How, how embarrassed am I? They hit that kick panel.
Oh, I liked the pedal. Yeah. No, I made the wheel, you know, the wheel comes in and out.
Right. And you tighten it up right there. And I also made it drop,
but if you don't need it to drop, that's fine. Sounds good. It's a great hood to look down.
Isn't it though? Like driving a torpedo. So all these people around here probably know you and
they know that whenever they see a cool car, they know you probably got something to do with it.
Well, it certainly feels faster than stock. You didn't have the compression ratio or anything?
No, it's, it was freshly built. They, the guy that did it, you know, that, that, uh, Jag works
there in, uh, Idaho. They've been doing them a long time, but I thought it seemed to run really
well. You know, it pulled good. I've never run it real hard. I've just, you know, I always figured
that my Galaxy is pretty fast. So that's my fast car, you know, but, uh, but it pulls good. It runs
good. I, there's a nice little S turn that leads to our, to our neighborhood and boy, you can,
you pitch it in there a little bit. Yeah. Yeah. Not a lot of curves. That's weird with the Galaxy,
but I could like 67, it was the synchro first, wasn't it? Wasn't that what? A synchro in first?
Uh, yes. Yeah. Yeah. Yeah. The earlier ones, the boss box, I guess the boss,
you had to really play with it.
Yeah. Cause I forget, you know, we're into the 25s now, you know, and I, I still look at,
you know, 1980 is just not that long ago. And this car is pretty much the halfway point
when you mentioned the automobile, you know, 50 years earlier is 1920 and 50 years later is now.
So it's just about right. Yeah. I liked that 307 rear end. It is nice. You don't feel a
difference. It's not like you're losing, they get so much torque, you know, you don't worry
about that lower end, but, uh, it sure helps going down the highway and that kind of thing.
It's effortless. God, I'm in second gear.
It's so long legged with that rear end. You know, I love this era cause I can enjoy watching
attack sweep across, you know, you drive like the P1 McLaren and you're in prison. What happened?
What'd I do? What'd I do? I realized, you know, it's like crazy. Yeah.
And that's true though. It's just the RPMs are just right there.
I mean, the golden age is really from 76 on back because you can work on it. They're easy to, you
know, you know, fixing up a Taurus from the late nineties and possibly you don't have the,
you can't tell if a relay is a good or not. The only way you can do is put it in the car and see
what's happening. You know, when I was a kid, these always felt spindly to me, you know,
you felt like you're going to break the wheel. If you hit the brakes, you're going to crack.
Yeah. I had to get used to that. When you get out, you can't hang onto the wheel and it's like,
you know, I was making sure I grabbed something else because they are, they're so,
I'm sure you can bend them pretty easily. They look so pretty, but not real durable
or not real heavy duty. When I was a kid, I didn't really appreciate these cars cause you're
just horsepower crazy. You know, you're all about burnouts and doing donuts and
these things were way too delicate for that. Yeah. I never figured out
spin the tires or nothing like that. It's not that kind of car. Yeah.
But it's wonderful to drive. It's cozy in here. Especially in wintertime,
you had a heater that worked, which was, you know. So are you still working? Are you retired now?
Just retired. Oh, okay. Yeah. It was a seven day a week. You know, I, I, I worked
lots hours every day, all the time. Oh, I know. Yeah. It's tough. I mean,
people really don't appreciate how much work goes into building something. I always used to say,
it's not totally true, but if you're making money doing this, you're doing it wrong,
you know, because you never can be compensated for your time. You know, people say,
Oh, fix the radio. It would take about an hour. Well, no, it took six hours cause we couldn't
figure out, you know, so many times it's like flat rate manuals. Those are always wrong.
You know, a shop says, Oh, it should be two hours to change the water pump. Yeah. Unless the bolts
are frozen and you got to use heat, then you snap the head off it. And now you've got to drill up
that, you know, exactly. So that's where I was so fortunate. I just had the best, I call them
customers. They were friends, you know, customers that I was so blessed with that. I'd never,
I never had as much as even a tense word with them. Everybody, you know, Jay, it was unreal.
The people I built cars for were just, well, you know, as long as you deal with car people,
it's great. But you get people that they watch these TV shows where people would build a car
on a weekend. Well, how long did it take? About a month? No, maybe about a year, a year. Yeah.
Now you're a crook and you know, yeah, I'm not sure if the TV shows were good or bad. I think
it was a little of both. Yeah. Well, most of the shows are not really, you know, you can't do it.
And there's always fine tuning and, you know, stuff like that.
If I was fortunate, the people I built cars for, they were all self-made. They came from nothing
and they worked really hard for what they had. And it's not like they were just ultra rich,
but obviously they could afford to do this. Right, right. And I think they appreciated that
they saw how hard I was working. Yeah. And therefore, you know, it was all good. And
that makes everything just to me. Well, that's a team, you know.
When I did the Tonight Show, I always wanted to be the first one in and the last one to leave.
And this way, nobody grudges you how much money you make as long as you're working harder than
they are. Exactly. And you did because you were doing a lot of comedy during the Tonight Show.
Oh, yeah, I still am.
This is the same motor that's in my tank. Oh, is it? Yeah. Did you rebuild the original shocks?
They're aftermarket, but they're supposed to be of the original spec and that kind of thing. No,
the torsion bars are a little bit stiffer, which you can feel, but it's all adjustable.
Right, right. You know, they weren't before. You know, they only adjust before you just move a
notch or whatever. And now you can play with the ride height and that kind of thing a little bit.
Is that a modern clock in there? Yes. Had it redone. There's a guy that does J clocks,
I'm thinking like New Jersey or something. Is it a battery in there? It's electric.
Couldn't believe that I was building hot rods and they were all cars. I never did nothing I
didn't want to do, you know, and so they were all kind of my cars, you know, and all my customers
always call them my car, too. And did you ever have a regular job? You know, I did for 12 years.
I worked for the federal government, actually worked for the Department of Army and for the
Department of Army. Oh, yeah. And I was civilian, but I designed computer networks back then. Oh,
I've got a master's degree in information systems, you know, and after 12 years,
I had been doing this nights and weekends and decided I had to, I need to either do one or the
other and then took the dive. So, yeah, then I'll never forget that first Sunday night that I was
on my own to get ready for Monday morning and my knee was twitching because I couldn't wait to get
to work and I thought I've never felt that way on a Sunday night. A lot of really enjoyable,
really fulfilling to do something that you have a passion for. You know that. How many cars you
built over the 20 years you were doing it? 20 years, is that about right? I had 13 cars. Oh,
okay. And, you know, they varied from one year and then, of course, some of them were several
and that's all I did is one car at a time, starting to finish. Right. Never, I never did
small jobs. So, people were willing to wait because I could tell them exactly, I couldn't
tell how long it was going to take, but they knew what I was doing between this car and the next,
you know, and started with two frame rails and would build everything up from there.
What was your most difficult build? Um, let's see. I did a 32 Vicky for Phil and Deb Becker.
That was, uh, they had the car since the early 70s. It was a family heirloom type thing and
they wanted to redo it. Was it stock? It was, uh, it was, no, he had hot rodded it in the 70s. Oh,
I see. And, and we went through that and that was a, that was a very, uh, very detailed car,
really. You know, it was a grade eight car in Detroit. Um, and it was a, it was a handful,
but a lot of fun. You ever get to the point where you look at a 57 Chevy and you go,
well, I hope it has a 265 with the two barrel and the three speed on the fifth. Cause you know,
they were just old cars and then they're like, you know, original unrestored. Yeah.
Well, that's what's going to happen is as, as once I, uh, retired, I found myself liking original
cars. You know, it's, it's kind of an unusual thing. Cause I was a modified guy my whole life.
And now I just appreciate seeing one that hasn't been messed with yet and want to hide it from
anybody. Cause it's so special that, you know, this is how it came off the factory right here.
Wow.
That's pretty good trust right there. Yeah. 307. That was a optional ratio, right?
But from what I've read, it wasn't offered to us. It was, it was offered in other
areas of the world. And I don't know why that was,
but, um, from what I've read that you couldn't, you couldn't get it in the United States.
And I don't know if they ever eventually did that, but it was the perfect, it was the perfect
ratio. We have a guy in the Scottsdale area. And so I'd ask him about a few things. And that was
one of the first things he told me, do you want to put a, you know, he told me where to go and
you can get them to put a 307. Yeah. Yeah. So glad. I think somebody makes a five speed that
fits in here now. Dave, you put me to shame. I got to get to work on my Jag now. I won't make,
it won't be as good as this, but I, I see some little improvements you've made. I'd like to make
and, uh, yeah, thanks for doing it right. You know, I mean, so many guys are disappointed by
bad bills and rip off artists. So it's nice to meet someone like yourself that always has
satisfied customers and builds them right the first time. Well, thank you, Jay. And they can
check your website, right? Put it up there again for them. What is it? Fastlanerodshop.com.
Fastlanerodshop.com. So there you go. Now you're in Phoenix, right? I'm in Phoenix. So you'll see
the car shows in Phoenix. So thanks for watching. I hope this is the kind of restomod I like. It's
not, it's just sort of built right the second time. Put it that way. That's what I call it.
All right. See you guys next week. Thanks for checking it out.
