Art deco chifferobe glow up

Antique Art Deco
12 followers
15 Video Views·May 3, 2026
This piece had a ton of damage from a previous refinishing, but i do my best to try and fix it and bring it back to its original glory to reveal its elegance and unique design.
Hey guys, welcome back. So in this video we're going to be looking at this beautiful art deco
piece that I got off of Facebook Marketplace for $275. And this piece was definitely worth it,
this is really a beautiful piece. Especially down here you can see that there is a beautiful inlay
and I'm not exactly quite sure what types of wood are used in this inlay but it really gives a nice
touch to this piece. And as I pan up here you can see that we have some bookmatched veneers
as well as some bakelite and metal poles which are very common in this type of furniture.
Taking a look behind this door and we have some cedar veneer which was used a lot in chests and
wardrobes and things like that because cedar actually has a natural oil in it that repels
moths and certain insects that could damage your clothes. And here we have some signs of a previous
refinishing which is the main reason why I kind of wanted to refinish this piece. But I'll get more
into that in a second. Now just taking a look inside of these drawers and these drawers are
actually in very good condition. I'm still going to give them a really good sanding and a refresh
but they are in very good shape. So now getting into the reason why I really wanted to refinish
this piece. You can see here there are very deep scratches almost as if somebody just took a wire
brush and just went at this drawer. And it's not just on this drawer it's actually on the entire
piece. And over here you could actually see that we have a bunch of pigtail marks, pigtail swirls.
And this would have been caused by using a very low grit with an orbital sander and I'm guessing
that the person who finished this last popped on maybe like an 80 grit and just went at this
very kind of violently. But I think with a little bit of hard work I should be able to fix this
damage. So taking that into account as well as the fact that this finish isn't really that great
is really the main reason why I wanted to refinish this piece. But other than that the piece is
actually in extremely good condition. So sit back relax and let's get into it. So to begin here I'm
going to be cleaning this piece top to bottom and I'm using MCS cleaner and degreaser which is a
very strong degreaser and that's going to help me get rid of all of this caked up dirt that's on
this piece. And you can see just how dirty just with a couple wipes how dirty this piece was. And
this is why it's really important to clean your furniture before you do anything else. And that's
because if there are any oils or waxes left on the piece it's going to gum up my sandpaper very fast.
And also I'm going to be grinding all of that dirt down into the wood grain when I sand.
And you really don't want that to happen. It can affect the adhesion of your finish which can
potentially be a very bad thing. So just something to keep in mind. And I cleaned basically every
square inch of this piece. I cleaned outside obviously. I cleaned the inside. I cleaned
underneath and I also cleaned inside the drawer boxes. So basically any spot that I planned on
refinishing I cleaned. And I actually had to get up on a ladder to clean the top because this piece
was about as tall as I was. All right so the piece is nice and clean so I'm now going to begin
removing all the hardware. And this hardware is actually very beautiful. It's Bakelite and
some sort of metal. I believe it is Bakelite at least. I'm not 100% sure. It may be some other
type of plastic but it looks like Bakelite to me. And unfortunately the metal part is not brass.
It is magnetic so it's definitely not brass. I'm guessing the previous refinisher spray painted
the hardware because there is some spray paint on it. But when I get to the hardware a little bit
later on I'll find out some more. So I'm just going to take my carbide scraper and I'm just
going to do a little test scrape just to see how intact this finish is. Because ideally I would
like to scrape this finish off but worst comes to worst I could just use a chemical stripper
which is actually what I end up doing because this finish was actually pretty intact.
And I am using Clean Strip Premium Stripper which is the best stripper that I've ever used.
It really cuts through those layers of finish very very well. It is extremely toxic though
so you definitely want to make sure you're protecting yourself. I often see people who
are using stripper not wearing a mask or not wearing any gloves or both and you really don't
want to do that. You really want to protect yourself against the stuff because if it gets on
your skin it will burn pretty bad and the fumes are extremely harsh so you really want to protect
your lungs too. I made the mistake of using a couple pairs of nitrile gloves on top of each
other when I was using stripper in the past and nitrile gloves aren't exactly made for stripper
or acetone. They kind of dissolve and disintegrate so you really want to use butyl gloves which are
made specifically for chemicals like this. And on top of wearing butyl gloves you really want
to wear a respirator obviously which is going to protect your lungs and you want to make sure that
you change those cartridges out often. I really even should be wearing safety glasses which I
do usually use but for some reason I'm not using them in this shot because I've gotten stripper in
my eye before and that stuff burns so bad it's really not a good time. I'm really trying to
take safety a little bit more seriously especially now that I'm on YouTube and I have a bunch of
people watching me I really want to set a good example. A question that I've gotten every now
and then is do you have to follow the grain when you're using a putty knife to remove stripper
and you don't necessarily have to go with the grain but if you have to go against the grain
for whatever reason just be careful because you can scratch the wood with a putty knife.
Now when it comes to scrubbing off the finish on the waterfall edge I'm just using a 3M stripping
pad which is an abrasive pad that's made specifically for scrubbing off stripper and
this just makes it extremely easy to scrub off that finish and I'm also doing the same thing
for the trim work on the side right here making sure that I get down in between all those routed
sections and making sure I get all that finish off and I'm just using some acetone to scrub off
all the residue from the stripper and it's the same thing for the side I'm just using that same
acetone to get rid of the whatever finish remains. Now I'm just going to remove this big beautiful
door so I can strip it as well and I think I'm going to be adding new hinges to this door because
the hinges weren't in great shape they were actually bent a little bit so I'm definitely
going to be replacing those. I'm just going to remove all the drawers and I'm going to continue
stripping and while I'm stripping this bottom section right here I'm thinking to myself what
I would like to do to this piece. Do I want to keep it original like it was? Do I want to do
something a little bit different? And I think I'm going to be keeping this original. I'm going to
be using a little bit of a warmer stain for it but I actually like what the previous refinisher did
in terms of color at least not his actual refinishing job and I'm just using that same
3M stripping pad to remove all the finish from the bottom trim and the feet over here. I usually use
a nylon bristled brush to get rid of all the finish on trim work like this but it all depends
on my mood I guess. There are always different ways to get finish off you can use different tools
you can use different methods and they're all effective but it all depends on your taste what
you would what you like to use. There's always more than one way of doing something and just
because I do something one way doesn't mean I don't know how to do it in a different way
and I don't know what it is about stripping off old finishes that makes it feel so therapeutic
for me. I guess it's kind of like out with the old in with the new kind of a thing and I just
get such a feeling of satisfaction when I do it and I know that a lot of people are probably like
what is he talking about but I don't know I just get such a feeling of like therapy when I do this
and in this shot right here it almost looks like there's ghosting from the hardware but that's not
actually what's happening here. What's happening is the hard where the hardware sat there was no
finish underneath it I guess the previous refinisher just sprayed over the hardware
when he refinished this piece last and there's nothing but bare wood where the hardware would
sit so you'll see when I sand that it'll all pretty much disappear and last but not least
I'm just gonna strip this big beautiful door and I know this is a lot of stripping but I got so
much good footage of me stripping this piece that I just wanted to share it with you guys
and there is one thing I noticed about this finish it's extremely thin I'm guessing the
previous refinisher only put maybe one or two coats of some maybe lacquer or shellac or something
there's really not much finish on this piece at all now normally I would start with a 180 grit
after I stripped off all the finish but since there were so many scratches and pigtail marks
that I had to get out from the previous refinisher I decided to go with a 150 grit instead but I do
have to be extremely careful when sanding this veneer because the veneer that is already very
thin is now even thinner because it's been refinished once before so I really have to like
you know tread carefully here because I really don't want to go through this veneer and you may
notice that as I'm sanding this off the bare wood underneath looks a little bit uneven and that's
just because there's so much damage underneath this that I have to get through that it looks
like that there's almost like shadowing on the wood but as I continue to sand it's going to all
come out one important thing to note here is that I'm not getting all the scratches out with my
first grit I'm getting a decent amount of them out but I don't want to dig too deep with this 150
grit I'll do the bare minimum with the 150 and then I'll climb up and get more of the scratches out
with my 180 and 220 and a really good tip is to continue to change your sandpaper
there's actually a really funny quote that I've heard before and it's go through sandpaper like
you're not the one paying for it and it's so true a lot of the time people will use the sandpaper
all the way down to the paper and you really don't want to do that it's not a good idea to do that
you really want to change your sandpaper out often now here on this waterfall edge I'm using
a foam pad and I'm doing this because it's a lot more gentle on the curves if I just went at this
with the regular surf prep I'd probably go right through and I did go through in a couple small
spots which was unfortunate but I knew it was going to happen eventually because this veneer
is just so super thin and this right here is the part that takes the longest for me at least
personally and that is sanding all of this trim work and especially on the base over here it took
a while to get all this sanded down because you got to get in between all those cracks and routed
sections it's just it's very tedious but we're getting it done so I hand sanded all the trim
work and I'm just using my surf prep sander just to sand all the flat areas and again being very
careful not to go through the veneer because the damage was literally all over this piece it was
on every square inch and I really did my best to try and fix it but it was a little nerve-wracking
going that far down into the veneer that was already very thin and I'm just hand sanding
these two areas because my surf prep was just too big to fit into there and I'm also sanding
the internal parts of the carcass and I'm also sanding the drawer guides so they're nice and smooth
and I'm just giving this really nice cedar veneer a really good refresh with a 180 grit and this is
going to reopen those fibers and get that really nice cedar smell going and this is a really good
shot coming up right here because in a second I'm going to show you on this drawer just how much
damage was actually on this piece yeah so there's a lot of damage it seems like he
from what I could tell it seems like he popped on an 80 grit and just sanded the crap out of this
piece and there are even some scratches and marks from what seems like a wire brush and I don't know
why exactly that would have been there I don't know what the purpose was but it's all over the
place and now you can see after my treatment it looks a lot better and even so there are still
some marks that I cannot get out and I'm not going to push it even further into the veneer
to try to get them out you know it is what it is at this point and to me being a perfectionist it
is a little bit frustrating to not be able to get them all out but it's not worth going through the
veneer so I'm just going to do my best and get as much out as I can and you can see on this shot
right here how blotchy the stain was and the way that this was refinished the first time it really
doesn't surprise me too much but you could really see it in this shot now there are ways to prevent
getting those pigtail marks for one you don't want to be pushing down too hard on the sander
you want to let the sander kind of do all the work for you you don't want to move too fast
for the sander you want to move relatively slowly but at a consistent pace and you also want to
change your sandpaper very often like I mentioned before and doing those three things will definitely
improve the quality of your sanding and will help prevent you from getting those marks
and finally it's time to stain I'm using a water-based stain by Ciman and the color is
dark walnut I kind of wanted to make the trim stand out just a little bit not not too much
contrast but just enough and I think that this color is really going to give me the kind of
contrast I'm looking for now this is my first time actually using this stain and I've seen some other
people who I kind of look up to using this so I wanted to give it a shot now this stain tends to
be pretty opaque which is not a bad thing it's actually kind of what I'm looking for for the
trim work at least now the veneer on this piece when the finish is applied the natural color of
it is actually very light and that's not really what I'm looking for so I'm going to be staining
this entire piece basically is what I'm saying but since this stain is so opaque I'm not really sure
how that's going to work out with the veneer because I don't want the veneer to be very opaque
I want it to be a nice kind of medium brown walnut color and I definitely want the grain to show
through a lot so we'll see what happens I'll do a little test area just to see how the veneer takes
the stain and go from there now you can see here I'm not using tape to tape off the certain sections
of veneer I'm just going straight in with a paintbrush and I'm just brushing on this stain
and that's just because whatever stain I do end up getting on the veneer that I don't want stain
on I could just do a very light sanding and remove it all right so now that I got all of
the trim stained up I'm going to do my last sanding of 220 grit and you can see I'm doing
the pencil trick right here which is something I really like to do especially when I'm working
with veneer and the pencil trick for anybody who doesn't know is just making light marks on the
wood just so you know where you haven't sanded and it can help prevent you from sanding through
the veneer and also gives you a very even sanding and like I said before I got a little bit of stain
on the veneer sections but that's really no problem I'm just going to come in with my sander
and I'm going to sand all the excess stain away there's also another way to remove stain depending
on which stain you use oil-based or water-based if you're using an oil-based stain and you want
to remove some of the stain just use a shop towel with some mineral spirits and you should be able
to remove a decent amount of the stain and it's the same thing with water-based stain just use
some water and a shop towel and just a light sanding and you should be good to go and most
of the time I'll usually hand sand the waterfall section of a piece just because the veneer is
usually extremely thin and that waterfall edge is very easy very easy spot to go through the veneer
so if you're working on a waterfall piece for the first time I would recommend hand sanding that
waterfall edge and with a high grit also not a low grit I would say probably 150 would probably
be the lowest grit you should be using so that will definitely minimize the risk of going through
the veneer on a waterfall piece and right before we get to staining the rest of the piece I'm just
going to clean up these drawer boxes a little bit now here I didn't necessarily have to sand down
the drawer boxes because they were actually in pretty good shape but it's just something I like
to do I like to make sure that I really refresh every aspect of the piece and it really makes it
stand out in the end I'm also just giving the underside of the drawer boxes a light sanding
there were a couple splinters here and there and a couple pieces of rough wood so I just want to
make sure that all of that is nice and smooth now these drawer boxes are constructed of oak
and oak was used a lot in the construction of drawer boxes because oak is a very strong
durable wood and is also water resistant which is really great for preventing warping down the road
specifically white oak is really what I'm talking about here and I'm just using that same dark
walnut water-based stain to take care of the top bottom and sides of the drawer face now basically
on every single drawer the dovetails were coming apart so I just put a little tiny dab of glue in
each little dovetail wiped up the residue and clamped it up and if you ever run into this
problem where your clamps aren't long enough what you can do is just take two or three if you can
manage clamps and just put them back to back it's one of my favorite little tricks that I've learned
over the years and as you can see it was pretty much on every single drawer that the dovetails
needed fixing but it's no problem it's actually a very easy fix now that I got all my drawers
clamped up I'm just going to stain the rim of the door which I'm using the same dark stain the dark
walnut stain and after I have that done I'm going to work on a couple of sections of veneer that
were missing I'm just going to end up filling them up with some wood filler but first I just need to
make sure that all the veneer around it is still intact and glued down and I know this isn't really
the best shot because my hand is in the way with the glue bottle but um all I'm doing is I'm just
using this razor blade just to peel up the veneer ever so slightly and I'm fitting the nozzle of the
glue bottle right underneath and injecting some glue and a glue squeeze out is a great way to
know that you have enough glue underneath there and I'm just going to do the same thing with this
next piece of veneer I'm just sticking the razor blade underneath lifting it up just a little bit
and injecting some glue I'm going to wipe away the excess glue that's here and there's really
no good way to clamp this up so I'm just going to take some tape and put as much pressure on
that tape as I can just to get it as compressed as I can I'm just using some wood filler here
just to fill up this little spot of missing veneer and I totally forgot to shake this up to mix
everything together first and it kind of exploded on me a little bit but it's okay I'll just wipe
that up and while I'm doing this I'm just making sure that I leave it a little bit proud so that
when I sand it off it'll be flush after drying for a couple hours I just removed the tape and
I'm going to do the same thing I'm just going to fill this up with some wood filler I could do a
veneer patch but I don't really have any veneer that would match this too well and either way
I would still have to do some color correction on it anyway so I'm figuring that using some
wood filler would probably just be the best in this case after that wood filler dried I'm just
going to sand it all down smooth and finally I can start staining the rest of the piece and I'm
using the same water-based stain by Ciman but this time I'm actually using the color walnut
which is a really beautiful color it's not too dark but it's not too light either it's kind of
right in the middle it's actually kind of similar to the stain that was originally on the piece
and just like any other stain I'm going to apply it and in this case I am using a shop towel and a
rag that I kind of go back and forth between and I wipe the excess away now unlike oil-based stains
this water-based stain dries very fast so I'm working in sections so I'll do one section wipe
up the excess and I'll move on to the next section and as I wipe this away you could see the nice
beautiful color that this leaves behind and I'm just going to do that for the entire piece
and right here I'm not using any tape to prevent the stain from getting onto the trim
I actually want the stain to kind of mix a little bit with the trim and I think it'll give it a
pretty interesting effect you won't notice it really too much but it's just something I kind
of wanted to experiment with and as I wipe this away you're going to be able to see those couple
little small spots that I went through the veneer on but it's all right I'll just uh do my best to
try to camouflage that a little bit later on I decided to stain the little trim area around the
inlay in the same color stain that I did the rest of the trim and it's a little bit funny actually
I easily could have just flipped this piece on its back to be able to get at the underside of
the inlay but um me being me I just decided to lay on my back and just sort of paint on the stain
upside down and I don't know why I thought this was a good idea in the moment but it's what I did
and I decided to stain these little sections on both sides of the piece on the bottom in the same
color that I did the trim work and I think that this is going to add a little bit more dimension
to the piece and instead of having all of the front basically all one color I'm just going to
break it up a little bit with this other stain and ironically this is actually kind of what the
original looked like in a way those two little bottom uh sections were also a little bit darker
and I'm just giving this inlay another quick sanding just to get off any stain that I might
have gotten on and now for the finish I'm going to be using lacquer as my finish but first I'm
going to be applying Easy Vinyl Sealer by Mohawk and all this is going to do is just seal the wood
grain and isolate the lacquer from the raw wood itself a good way to think about it is kind of
when you put a primer on before paint it's kind of a similar dynamic you don't really want to go
out the wood with just raw lacquer you really want to use this stuff first and that's because
it provides a very smooth surface that aids in the adhesion of the lacquer it also enhances water
resistance and obviously an important step before you would apply the Easy Vinyl Sealer is just to
make sure that there's no dust on the piece and tack rags are really great for that and you may
notice that the stain looks a little bit dull and even chalky almost but as soon as I seal it up it
brings out the real nice rich color of the stain now after letting that Easy Vinyl Sealer dry for
about an hour I'm coming in with a 320 grit and I'm going to give it a very very light sanding
this is important because this gets rid of any dust nibs that may be on the piece
because unfortunately I don't really work in a dust free environment so dust does sometimes get
on the piece now I'm just going to address those couple spots that I burned through the veneer a
little bit and I'm just using Mohawk blend all sticks in between coats of Easy Vinyl Sealer
all this is going to do is just isolate each color layer from each other and make the color work look
a little bit more realistic so what you're seeing here isn't the final results this is just one
layer that I'm doing out of a couple I also used a stain touch-up marker just a little bit
just to try to get a little bit of a closer color match wasn't great at first but it did help a
little bit it's really in the second layer that I'm going to be doing that is going to make it
look a lot more realistic so now after two coats of Easy Vinyl Sealer lightly sanding in between
each coat I am now applying the first of about five or six coats of a clear satin pre-catalyzed
lacquer and I should clarify actually I'm doing about five coats on the very top and I'm doing
only four coats on the rest of the piece and you may notice here that it looks like I'm not getting
full coverage with the spray that's not the case actually it just appears that way for some reason
but I'm getting full coverage I think it might be the lighting that kind of makes it look that way
a little bit all right so we're almost done here actually now I'm just going to install the hinges
back onto the piece and with the help of my dad I actually got this door back on because this thing
was pretty heavy now to take care of this hardware I am just using a degreaser just to clean up the
little bake light components and it actually worked very well I just had to be extremely
careful because these little bake light pieces were very thin and I definitely did not want to
break them and I was planning on spray painting this hardware gold but I then realized that I had
some rub and buff and I think rub and buff is going to give me more of the look I was kind of
going for more of like a antique-ish sort of a look and I'm just testing some on the corner of
this pole right here and it actually looked really nice so I'm going to continue and just use a brush
and continue to put this rub and buff on and a little goes a very very long way with this stuff
you only need a little dab of it and you can cover pretty much the entire pole
and just buffing it off here and yeah this is pretty much the look I was going for kind of a
weathered tarnished kind of a look next I'm just going to seal the drawer boxes with some shellac
and I know shellac isn't the most durable of finishes but since this is just going to be
holding some clothes I feel like it's more than sufficient I normally would use something like
but this is just what I chose for this particular project and I'm also putting some hemp oil on this
beautiful cedar veneer I'm choosing hemp oil because hemp oil is still going to allow the
cedar to breathe and be able to emit that beautiful cedar smell without sealing it
completely and you'll notice too that the cedar is darkening up but it will fade over time and
all I'm doing is applying the hemp oil letting it sit for a little while and I'm just rubbing off
all the excess and that's it we made it to the end of the video so thank you guys so much for
watching another video and let's rewind a little bit and take a look at what this piece looked like
before it wasn't really in terrible shape but there was a lot of damage in the form of a bunch
of scratches and really bad pigtail marks the stain itself was actually extremely blotchy as well
and it just kind of had an overall sort of dingy vibe to it and I know Art Deco isn't really
everybody's cup of tea but I really hope you like what I did to this piece
so enjoy the reveal and I will see you next time
