BOTANICAL PAINTING - botanical watercolor made easy

G-Art
6 followers
2 Video Views·May 3, 2026
BOTANICAL PAINTING made easy - in this full length watercolor leaves tutorial, I explain how to achieve these botanical leaves step by step. Botanical illustration can be difficult but giving it a modern spin - botanical art has a much more relaxed approach. I will explain how to paint leaves in watercolor, the colours I use and how to use negative painting around the leaves.
Hi, I'm Helen and in this week's video we are going to be painting this beautiful
contemporary leaves in watercolour. So make yourself a cup of tea and let's dive in.
I always begin my paintings by taping down my watercolour paper to my watercolour board as shown.
I've printed out the photograph I'm going to be using as my reference photograph.
I've put some lead on the back just by using an ordinary pencil like this,
flipping it over and tracing it down with a mechanical pencil.
Once this is done I use my colour chart to match my colours and we'll just do a quick
material run through. The greens I'm using are leaf green, sap green and olive,
along with Indian yellow, burnt umber, the rather strange looking cobalt violet,
along with Payne's grey. The paper I'm using is Saunders Waterford,
hot press paper, a 300gsm and I will put all the equipment list in the description box below.
With the line drawing in place I look at my colour chart to select the colours that I'm
going to use for my first wash. I've decided to use cobalt violet with Payne's grey.
For this it needs to be really really watery and I'm going to apply it to some of the leaves and
also this leaf here where it has a disappearing edge where the light hits the top. I'm going to
also use this tone on the stalk of the leaves as shown. It has to be really weak. Now that this
colour has dried I begin to mix the yellowish tone within the leaves. You can see me mixing
leaf green along with a little bit of Indian yellow yet again to a really weak and watery
consistency and applying it where shown. I'm always looking at my reference photograph
throughout these paintings so that I can see exactly where I'm going with each tone and each
colour. I'm applying this tone where I feel it is needed, just carefully cross referencing with my
reference photograph. Botanical painting is all about matching your colours accurately as well as
your tonal variations. Next up mix sap green with a little bit of Payne's grey to make a vibrant
darkish green. Working through leaf by leaf I'm going to apply this colour negatively working
around the veins to form the shape of them. It's a rather time-consuming process and you'll need
a steady hand but it's a really enjoyable thing to do. I'll continue this process throughout each
leaf looking at the reference photograph as usual as I work through. You can see me on this bottom
leaf just painting around some of the tiny little highlights within the leaf itself. Using a damp
brush to blur the paint into the paper. This creates a really soft edge. The next bit I use the
tip of the brush to create a harder edge and then blending it into the paper like this.
Most of the paints that I'm using for this tutorial are made by Winsor & Newton
apart from the leaf green which is made by Holbein. I actually love Winsor & Newton as a brand and I
would probably say that they're my favourite and if you have a favourite brand just drop them in
the comments. I'm always interested to know what paints you like using. I've watered down some of
this paint here to match the colours of the photograph. Once again blending it into the
yellow tones that you can see me doing here. Still working negatively around those veins.
I've let the paint dry a little and then I'm adding a simple just plain water glaze with a
slightly larger brush. This will help merge the colours together. Next up I'm going to mix sap
green with a little bit of cobalt violet along with Payne's grey and once again working through
the leaves one by one negatively painting around those veins.
As I said it's a little bit time consuming but really enjoyable and relaxing.
As I apply this colour over the initial wash where the disappearing edge is on this bottom leaf
I make sure that I blend it into the existing wash with the damp brush as shown.
This will retain some of the initial colour but still giving it a really soft natural looking
blur. Once again working through bit by bit. I'm now going to mix cobalt violet with burnt umber
and a tiny bit of Payne's grey. This will form the base colour for the stalk and I'm going to
apply it using a smaller brush in a stippling motion to form texture. Just by wiggling my brush
it can help create the illusion of bumps within the stalk. When this is dry I add another mix of
Payne's grey to burnt umber and I'm going over it again using the mid and darker tones to create
the illusion of a bark like texture. Now that this is dry I have two mixes on my palette
sap green and sap green with a bit of Payne's grey and once again I'm going through the leaf
bit by bit to try and match up the colours to my photograph. I'm just dipping in and out of
these two mixes to make it look really natural and organic. We don't want any flat colours
as I've said tonal variations are just as important as colour correction.
Now that the leaves are dry we can start to think about the negatively painted veins within them.
Mix burnt umber with a little bit of cobalt violet to a sort of medium consistency.
Also added a tiny bit of Payne's grey. Apply this colour to where you've negatively painted around
the veins. The veins are looking too stark because they're white at the moment and we
need to add this natural brown colour to each of them.
Veins now painted in I'm mixing a dark green again with sap green with a tiny bit of olive green
and also some Payne's grey. Using the tip of my very small number one size miniature brush
I'm outlining some of the areas of the leaves just to give them a little bit of a sharpness
and it'll also do the same thing around each of the negatively painted veins. This will give
the illusion of the veins being slightly raised because they're not actually flat within each
leaf. Once again this takes a little bit of patience but it's so rewarding once it's done
working through leaf by leaf carefully looking at the reference photograph as you go through.
If you are interested in learning about botanical painting consider joining my Patreon site where
every month you'll get a brand new full length tutorial as well as weekly updates and small
mini videos to help you along your watercolour journey. And if you are enjoying this video
remember to give me a thumbs up and consider subscribing to my YouTube channel so that you
don't miss new episodes coming out every single Tuesday. Using the tip of this very tiny brush
I'm outlining some of the areas that I've painted. This gives it form and definition.
Working around some of the negatively painted veins and also around the outside of the leaves
to help sharpen them up. Sharpening up every single leaf within the plant to bring it to
its conclusion and now back over to me. Thank you for watching and I really hope that you found this
video helpful. If you enjoy painting these leaves you may also want to try painting this lily where
I show you how to paint it using a similar technique. So click through on the video and
I'll see you there. Thank you for watching and until next time.
