Como Fazer Low Fade (Metodo Sem Pentes)

Hair Models for Men
14 followers
3 Video Views·May 2, 2026
Kit JRL GHOST ( corte, acabamento e shaver).
https://meli.la/1QrELWQ
Tesoura Titan 3D 5.5”
https://meli.la/2EFLFfs
Pente Cônico de Carbono
https://meli.la/12RezdL
So, to do a low fade, we'll first do this cleanup here.
All this hair. So we're going to come here with comb number 6; I took a larger comb than I have
Here, comb 6, and I'm going to make the C motion here, leaving the longer edge. First, I'm going to remove
The volume, and now I'm going to use the smaller comb, comb number 3, so we can gradually reduce it, okay.
So it'll be a low fade, the fade will be as low as possible, right? Alright, we'll clean all this up now.
Here. Now what do I need to do? To make it easier for us to work together, I'll already connect this
See, there's a loose end here, and this part isn't right either—I'll fix this.
With the serrated scissors, actually it's with the cutting scissors. So I came here like this, and I do a comb-through,
to get rid of all these strands that keep coming here. How do you do that? I'm going to lift up my hair and I'm going to
Cut or, I lift and cut. I always keep lifting my hair to just trim the tip of the strand, and it's only the ends.
You see, this part here that's smaller, and this one too, and this part that's bigger, you see?
I come here and align the two ends, you see? That way, we connect the hair better, you see?
So now I'm here, I'm going to make my first nail tip marking with a nail file, and this marking will be for
mark where my fade will end. So I come here like this, since it's a lower fade, I don't
I can go up that high with a 1.5 comb. I'm making a C-shaped movement, which I want to create a brand, okay?
Now I know the gradient only goes up to here, see? From here on up is an edge. Now we
Start with marking the lighter part of the gradient, which is with the low zero. Here it is, it also creates
I'll make this marking using the C movement. So I'm going to create this marking using the C movement.
I'm continuing. You noticed I had a flaw here on my little toe, I used it as a base to go back and forth.
Right away, now this other part here, we remove it, and it will be prepared for the finishing machine.
How do you do this preparation? I come here like this, I press down, because this way, the machine takes more
Like this. And since, actually, I'm going to prepare for shaving, right? Because shaving removes more, so she's already
It's like creating a connection. And here, I normally remove it, see how there's a mark here, which we made with the
Finishing machine. I come with the shaver and go up to this mark. If it doesn't come out, we'll just proceed like this.
Gently running my hand from top to bottom, very lightly. Look here, my brother. Look, this back part here is too bright.
You're serious? Hmm. Okay, now we're going to do the gradient. Like this gradient here—it's about a finger's width thick, see?
It gives zero clearance at the center for the pentil, it's only one finger's thickness. What am I supposed to do? I've already been coming straight in with my high zero.
So I come here to the lever, and I open it. Calmly. And I make a C-shaped movement. Like this, what am I going to think?
I want to grab the tip of my machine, let me focus here. I want to grab the tip of my machine, the tip of the machine.
Right here on this line, and the back of my machine right here, from above. Okay, so I'll do it like this.
It's a fade movement, basically. Your hand has to be very light, you know, to perform this motion.
There are times when I'll just use the tip of the blade, to have more precision—especially for making this little turn here.
Now I'll clean these darker spots, I'll clean the tip of the machine, and I'll keep cleaning.
I did the first part with the high zero; I come in and close two levels of leverage.
I'm doing the same thing, but with a shorter movement.
Look, my lever isn't ratcheted. Just lower it a little, leave it halfway.
Now, I'll set it to zero because I've already marked the zero, right? So,
Leave her a little above zero, a little higher than zero.
Between the midpoint of the lever and the low zero.
And we've practically finished already. What's left now? Polishing.
Polish it to make this mark here smoother.
I'll do this with the scissors lying down.
I recommend you get one like this, a little smaller, see?
I'll leave the link to this comb in the description here, in case you don't have it.
Tiny little thing, this here. Why? Because it's going to grab the tiniest little hair.
And it will make the connection with the longer hair.
So what am I going to do? I'm going to lift up the hair here and cut it with scissors.
I'll give one, two, three snips, then stop and comb it down.
And I'll analyze it to see whether I need to trim more or not.
So I'll have the client's face tilted so I can see it better.
So I come here, one, two, three snips, comb through and check.
One, two, three snips, I comb and see.
Two, three snips.
I'm doing this slowly, okay? There's no need to rush this part.
because you will be analyzing.
The gradient will become smoother, not that harsh, marked effect.
Some people like it, but I don't.
Now we're going to smooth it out, okay, I've already done everything here in the gradient tool.
Now we're going to smooth out the line connecting the edge to the gradient.
It's like a step, you see here, right?
This step here.
Here we already come with the cutting scissors.
Why? Because the cutting scissors cut more hair, so it will be faster.
And there you have to be more careful too, okay?
You who are a beginner, don't cut without seeing what you're doing.
So you're going to lift up your hair here and just trim the ends, okay.
I'll take this wider section here, because it has plenty of hair.
Oh, you're only taking the step.
What is a step? It's like a corner piece that stays, you know?
There you go, you're going to take that quina.
Look how he's already leaving.
Now that I've removed the quina, I'm going to mix this quina.
It's the part we cut with the scissors and the part we cut with the machine.
Here I come, look, where the little stall was, and I'm removing...
No, not really, mixing, right?
Make the gradient smoother.
And now, to finish up, we do the finishing touch here, look.
We pull this part down here.
Just pull it a little, okay? Don't pull it too much, because it looks awful afterward.
Can this gradient be improved further? Yes, it can be improved.
We can make a point cut here, look.
Oh, you want to know the scissors I use?
This one here is a Titan, right?
I'll also leave the link there for you to purchase.
I buy from China, but I have a place here in Brazil.
Mercado Livre indeed.
I'll leave the link for you to grab.
Where can I buy it very cheaply.
How's it going?
Oh, cut it out, guys, oh.
You'll take this part, for example, okay.
Do you see this part that's darker?
There's a big dark spot here, look.
You're going to grab the hair.
You're going to cut it as if this part here were dark.
You'll take it like this, okay.
And cut in half.
See? To make it a bit clearer.
So you have to come toward...
Against the direction of the thread.
So if the thread comes this way, you come like this, okay.
Cut him.
He's going to give it a clear coat.
And keep that...
What do you mean?
Make it more uniform, like this, the gradient.
You see it?
That's it.
Degradé done.
I'll show you the finished version.
Hey? If you want to see how we did the top part here, check it out.
I'll leave the video link here in the middle of the screen.
You there?
Just click and find out how to cut the top part.
Alright?
Right here with you.
And it's us.
And don't forget to like, okay?
Also subscribe to the channel here.
I forgot to mention that.
