Landscape Photography On Loch Ness | From Location, Edit, To Print

Decoding Loch Ness
7 followers
I thought we'd just dive in for this one. I've been exploring around on the east
coast of Loch Ness today and you can see it's been a very
wet rainy day. Not the best for photography which is why I've been
driving around trying to find locations and exploring new places. I've
actually been to this area before but I photographed
the beech woods up on the road and I did an ICM image and it worked out nice.
I'll put that up now just so you can have a look.
But today I've come down onto the shore. As you can see
I'm in the water with my wellies on and it has got this wonderful mist
across the landscape across the biggest loch in the UK and it just looks wonderful.
It looks so different, so quiet, tranquil.
So I've got on my polariser just to cut down on some of the reflections of the clouds.
I didn't want to cut them out completely because they are an important part of the
composition. They add to that essence of quiet.
I've also got my 4-stop soft grad on and I'm getting an exposure of 0.3 seconds
and I think it looks great.
Now that I've got that one in the bag I'll probably continue the journey
and go to another spot.
I was just trying to find a composition using that boulder.
As I made my way along the beach the boulder really stood out for me
but I couldn't really find a way of framing it up with the landscape.
It just looked too heavy and too big in the frame
or it crept into the horizon on the other side of the loch.
There were several reasons but it was quite difficult to frame it up
but I was just intrigued by the shape and the colours of the moss.
Day's not over, I'm going to continue on and go look for some other spots to photograph from.
I've come round to where I wanted to come to next but the whole landscape is in cloud.
The cloud is just sitting where I want to be and where I want to be photographing.
I'm going to sit tight for a bit in the car.
It looks to be improving a bit now, there's some break in the clouds.
I still can't see the landscape that I wanted to photograph
but where I wanted to be has cleared amazingly.
I'm going to put on my waterproof and head up the track and see what the weather does.
I've come up the track roughly, I think, to where I want to be
but the cloud has rolled in really thick.
I can't even see if I'm about where I want to be to compose a shot
if and when the clouds do get a little bit thinner.
So basically over here in the clouds there is a lock, there's some forest, there's some hills
and so I was hoping for a little bit of mist to help aid separation
and to lend a bit of interest to the composition but this is just proving too much.
I can't even see the lock so as I say I don't know if I'm in the right position
for any composition.
I'm going to give it a few minutes but I think I might need to go to my plan B for this video.
My car is down there, somewhere down there, you should be able to see it.
But here's the funny thing, all of my weather apps do not say it's foggy here
even though I'm standing in fog.
I cannot get these apps to work well in Scotland, it's much, it's so isolated to
individual square meters practically.
So yeah I think I'm going, there's not, there's about a half hour of daylight left
and I do not think these clouds are going to clear at all.
I'm going to do something a little different, something I haven't done before
but I think it will work out better than trying to stick it out here.
Okay so you saw that did not go to plan at all.
I was expecting to go to several different locations around the east coast of Loch Ness
taking, like I normally do in my in the field videos, just going out and getting some pictures
of various locations, various styles, whatever came, whatever I came across and whatever I felt
worked on the day but that's not what happened on that day unfortunately.
To be perfectly honest there was not a mention of fog in the weather forecast or low clouds or
in that case.
It did say there was going to be rain but I've done photography in the rain before,
it's not a big issue for me to be honest.
You have to deal with it being in Scotland and so it was a bit unexpected
and the weather maps that I had showed that the rain was going to ease and the clouds were
going to lift a little bit which is what I was hoping for when I went to that other location.
So instead we're back here, back at home and what I'm going to do for this video
is I'm actually going to show you how I edit my photos.
Now I'm not an expert, I'm just showing you what I like to do, how I like to process my images
and you can take some tips from that if they help you with your own editing.
So there's going to be a mixture of this to camera pieces as well as screen recording
that I'm doing now on my computer as I edit this photo.
So the photo that I'm going to be editing is the one that I managed to take in the water
of Loch Ness just on with the misty background.
To be honest it's not the best image, there's a lot of cloud and it feels very unbalanced
because there's a very dark area on the left hand side which you should be able to see.
So this area here is very, very dark and it throws this lighter area on this side out of balance.
It's still a nice image, I think it captures the weather well, it shows the misty low clouds
and I don't think, well I certainly haven't seen a photo of Loch Ness like this before.
When I come into Lightroom after I've imported the raw file,
the first thing that I do is I do a lens correction.
Remove chromatic aberration and sometimes, especially in wide angle shots,
there will be chromatic aberration over here in the edges.
There's a lot of diffraction with the 17 to 40 millimeter and there's also this
heavy vignetting which is why I enable profile corrections
and that removes the distortion of the wide angle and it removes this vignette as you can see here.
There's still a touch of vignetting that could be due to the neutral density filter
I got there, darkening that area or it could have been that that
area of cloud was a bit darker anyway.
So after lens corrections my next step is to try and adjust the exposure.
Now in this case there's this horrible white patch right here, it's very bright
so I'm going to drop the highlights and I think I'm going to have to drop them quite a lot
so you can get those definitions back in the cloud as you can see there.
Just here there's a bit more definition and then this area over here is very dark,
this is very dark and this is very dark.
So I'm going to lift the shadows just a little bit.
With the Canon camera you can do it quite well, like that.
Looks great, a bit more balanced in my opinion.
I don't want to go too far, if I go too far it just looks fake,
it doesn't look how the scene was, there's too much light,
there's not enough definition in the shadows, it just looks horrible.
So for this image I think around just below 50, around 40 should be good.
The other tool that I think is amazing in Lightroom is the Dehaze slider here
and it just helps to give definition to this area pretty much everywhere.
So I do a global dehaze of about 20 I think on this one.
I don't want to go too far because if you go too far again it looks horrible.
So I go to about 20.
Now I'm going to adjust the colours so I'm going to use this eyedropper and go to
the whitest part of the image which is around there
and that's just dropped the temperature down a little bit and increased the magenta
and it just gives it a better balance.
And I find the eyedropper to be a particularly useful tool to get the colour balance correct
because when you're taking a photo the camera is judging the white balance on the whole scene
when really you want it to judge on one particular part,
the most neutral part, the most white part or the most grey part of the image.
So being able to adjust that in Lightroom is really useful by just taking your eyedropper
and selecting the area that you think should be as close to white or grey as possible.
That's the first part.
My next step is to see if I want to make these greens a bit more vibrant
and just to increase the colour of the image because I think it looks a bit grey.
So I'm going to increase the saturation but by a little not a lot because
again you see this with a lot of photos especially on Instagram they push it right up
to something like that and it's just too bright it's too,
I mean look at that that's so orange it's it's unrealistic.
So I prefer to just I will increase the saturation just a little just a touch
and that gives a little bit of better definition to the colours in the image.
And then I will also increase the vibrancy and the vibrancy is basically the colour luminance.
It makes the colours brighter it doesn't make them more colourful that's what saturation does.
So for this image I think I'm going to increase this more than the saturation
not that much probably about there just to bring out the colours especially around this area
and here just a little bit you don't want to overdo it with editing.
Just have a sip of my coffee.
This image is still very bright in this area here which I don't like at all.
So I'm actually going to go to my brush tool and that way I can select the areas
that I want to darken and dehaze and not do it for the whole image which is important
and it's really useful this tool.
You can use it for all sorts of functions.
So I'm just going to click on this here the show selected mask overlay
and that means I'll be able to see where I'm brushing.
So at the moment it's on dodge but it looks like that.
I'll just remove that.
Now the tool that I'm going to select is darken and dehaze.
So what that does if I click on it it's going to adjust the exposure
and it's going to increase the dehaze.
So it's again going to add more definition to this area in particular.
Now I want all of this area all of the lighter part to be a bit darker
and to have more definition because at the moment there's just too much reflection on the lock.
There's too much brightness in the cloud so I'm going to go
massive with my brush and just go right up like that
and I'm just going to paint this whole area.
That looks good.
And if I go to 1.1 and just have a look at you see that at this diffraction
that's from the lens here.
It's one of the reasons why I really want to change my lenses to be honest.
And then the other thing you can do with this brush tool is hit erase
and that means I can target and remove it
where the marker was just crept over where I don't want it into this dark area.
Here like that, like that.
That's giving me a big old area with this darkened dehaze brush.
Now if I just show you what it was before and what it looks like now
that's a lot better, a lot darker, more definition in the clouds
and you can adjust these factors for that layer.
So when it's selected like it is there if I adjust it
it does the adjustments to that brush area only like that.
That's obviously too much but I might just creep it up a little bit.
Yeah that's much better.
There's a bit of darkness on the leaves so you can see all this diffraction in the corners
but what I am just doing now just before I finish
there's one and that is spot removal.
There's some sensor dust, got to be careful of that.
Might have been something on the filter, there could have been something on the lens.
There's a million ways that it could have got dust on it.
So what I'm going to do is I'm going to check through the whole image for any little
spots to remove and we'll move on to the next part once I finish.
So what I actually do for printing my files instead of using Adobe Lightroom
which is not necessary, I export a file.
So I'm going to export this as I have a print profile here so I click that.
What does that entail?
Well I have it set at an image format of a TIFF.
I don't need it in, I don't want it in a JPEG.
The TIFF gives it a lot more definition.
The color space, now I used the Xrite iStudio to provide ICC profiles for all the papers that I use
so I can actually select the color, the ICC profile of the paper that I'm going to use
and that helps me get a better color rendition in my opinion.
Again, I don't know if this is how other people do it, this is how I do it.
That means that I can choose the ICC profile of the silk Bariata paper
which is paper that I will use in my printer with a 16-bit depth
which means there's a massive color gamut.
The resolution at 300 pixels per inch and I sharpen for matte paper, just the standard amount.
I could choose, because Bariata is a bit glossy, I could choose glossy
but I don't think it needs it.
So before I send this file to printing, I do one thing a little different
and that is the fact that my light has gone out.
To prepare this image for printing, I just have to adjust the exposure value.
What I see on the screen is not how it will look on paper
and through some experimentation I found that a simple adjustment
on the exposure of by half a stop brighter, by increasing the exposure by half a stop
I will get an image that looks closer to what is on my screen on the paper.
Now there's probably a much more technical way of doing it
but I'm printing for myself right now, I'm not printing for anyone important
or a client or anyone else who is buying a print
but this is how I do it and I'm happy with the results, I think it works out well.
And then I export it.
So then I have to open the Canon Professional Print and Layout
and you'll notice this is the file here.
It's just on my desktop but it doesn't look right.
Here it looks pinks and blues and greens, it doesn't look the right colour space
and that's just to do with the colour profile that we loaded.
But the colour profile, the benefit of using the colour profile of the paper is that
the Canon software doesn't need to convert it, it's already in CYMK colour space.
Cyan, yellow, magenta.
What the heck is K?
Well anyway, it's in the colour space for printing
so I can just drag and drop that into that window.
I choose the paper size, this is going to be, it's going to be an A3 paper size
and we'll send that off to print.
So now it's time to print.
I'm just going to stick on some lint-free archival gloves to handle the paper.
That's just to try and stop any fluff or anything getting on the paper which can ruin the print.
I'm using this Pinnacle Premium Fine Art Barriart paper, it's 300gsm A3.
300gsm means that it's a bit heavier weight paper, it feels almost like card
and I use this paper actually for gift cards and postcards as well.
Take this out and then slot it in the back here, make sure the guides are all down.
Good, so that's the paper in, set in the settings, now I just have to press print.
There we go, now it's just a case of leaving it to do its thing
and this is going to take a little while.
So it's finished printing now, I'm going to leave it for a few minutes to dry completely
before I handle it.
So it's just going to sit there and then I'll take it through to the living room
which has a lot of natural light so I can examine the print and see if I've made any mistakes.
Yeah, I'm just looking over the print, just seeing if I've got any blemishes,
any spots that I missed, anything wrong with the print
and to be honest it looks pretty darn perfect.
The diffraction in the trees is a little bit distracting in this print to be honest of Loch Ness
but if it was up on the wall and not here in my face you wouldn't notice it,
you wouldn't notice it honestly.
But yeah, I'm happy with how that turned out.
Just put some new batteries in my LED panel.
That's it for this one today.
I was trying to recover the video to be honest because it didn't go to plan.
The weather was a lot different to what I was expecting.
I mean I was expecting rain but not fog and not being able to see anything
so that was a little bit disappointing.
If I had known there was going to be fog I would have changed up my plans
and gone somewhere else or done something else
so it's a little bit of a nuisance
but I had this idea for doing a series every now and again
throwing in a video of the process from location to print.
How I edit, how I print the image, how the prints turn out and that sort of thing
and so I just wanted to have a go with that and I figured why not.
I've enjoyed the process of making this video.
It's been a bit different for me.
I've tried new things including the screen recording,
trying to light my face with an LED panel and just showing you my process.
I know that there's going to be people out there that say like
oh you should have done it this way, you should have done it that way
and you know the first time that someone admits to knowing everything
is the time that they're not willing to learn anything
and I'm always willing to learn something new
so if you have any suggestions on my workflow or any tips
or if you use a different tool to me comment in the section below
and I might try it out later in another video if I like it.
Photography and editing is a personal process.
We all have our own ways of creating our own art
so that's just a bit of an insight into mine
and you know my editing style changes as I grow as a photographer
and it will change in the future I'm sure.
Thanks for watching.
If you have enjoyed today's video please consider subscribing.
You'll see more of my in the field videos
and I've also got some plans to do more videos like this.
Thanks for watching and I will see you on the next one.
