Windlass 1796 Light Cavalry Sabre - Sword Review

Rune Slicer
2 followers
1 Video View·May 1, 2026
A look at the new Windlass 1796 Light cavalry sabre, or saber, and why it is potentially a game changer for sword buyers and users. Links to where you can buy one below
Is this new windlass saber epic and truly the best reproduction saber we've ever seen?
Let's find out.
Hi, I'm Nick Thomas and welcome back to the Academy of Historical Fencing,
and today I'm going to be taking a first impressions look at the windlass 1796 light cavalry saber.
So windlass have been making reproduction swords for a very long time,
and frankly they have, I would say, a mixed reputation in terms of
they're kind of, they're quite affordable, they can be quite tough and good enough for cutting,
but they vary in terms of handling characteristics and how good those handling characteristics are
from model to model, and they can be a bit inconsistent in that regard,
so you have to choose quite carefully.
Now, what we have here today with the 1796 light cavalry is an entirely new philosophy
from windlass and frankly from any reproduction saber maker yet,
and this is a hugely important release for the simple reason of how they've approached it.
The approach to making this reproduction is very, very different,
and that's what I'm going to discuss first,
before we go on to establishing whether they were successful in that endeavour.
So with most reproduction swords, the way it works is a company generally looks at photos
online, maybe of a museum or something like that,
and they just make a rough facsimile based on a photo.
They might have some rough measurements of length and things like that,
and they make a rough facsimile, and it's as a result usually not too great.
Now a couple of years ago I made a video on why reproduction sabers are absolute junk,
and by reproduction sabers I mean reproductions that are intended to be sharps,
okay, so actual reproductions of a functional cutting weapon,
or in this case a cutting thrust weapon,
and not say a training sword, because the training swords are a completely different category,
they're built differently and designed for a different purpose,
so we're only here talking about exact reproductions of sharp weapons.
And I made that video and just said that every reproduction saber
that you could get was pretty much junk, and that's near enough true
unless you forked out a lot of money for an incredible custom sword.
Now a few things have changed since that video, not much actually, but a few,
and significantly this saber has taken a different approach.
So instead of just looking at some photos, you know,
Google a few photos of a sword and copy it,
which was never going to result in a good training sword,
Windlass went to Matt Easton of the Scholar of Gladiatoria
and got him to source a typical example of a 1796 light cavalry saber, an antique,
and then they copied it exactly.
So fundamentally we have a completely different design approach here,
and as a result if they have done that successfully,
if they've copied it very accurately,
you're going to have a reproduction sword that is bang on correct,
and arguably isn't even a reproduction in the sense that we typically think of it,
because again a reproduction is just a company copies and makes a rough facsimile of a sword,
but with this Windlass they have done an exact copy of an existing sword.
Now that is how these swords were originally made.
These patent swords, the way they worked is a standardised design was created,
and then given a wax seal,
and that was given essentially as the pattern, as the example for other makers to copy.
So if a company makes an exact copy of an exact original sword,
that is the way the original swords were made,
so you could arguably say it's not even a reproduction anymore,
it's a modern production run of a patent sword.
That's pretty fascinating, to me at least.
So why is this so hugely important,
and why were sabers a few years ago absolute junk,
and why is this one so different?
It's not just that they've copied it 100%,
because that doesn't really tell the full story, okay?
The biggest problem that sabers have in terms of reproductions
is that they need a lot of distal taper, or at least most kinds of sabers do.
Again, saber is a hugely broad category of swords,
but let's just consider, you know, this type of saber,
this kind of British light cavalry saber.
They look absolutely savagely brutish,
and the reality is they were.
They were famous for cutting limbs off, cutting heads off,
they were absolutely brutal in terms of cutting power.
However, they are nothing as cumbersome as you might think,
based on a photo and based on most reproductions,
because this looks like a massive amount of metal a long way from the hand,
and therefore you'd think it handles like a club.
But the reality is they have a massive amount of distal taper.
So let me put the scabbard down for a moment,
and I am going to kind of waffle on a lot here,
because it's hugely important as to what they were aiming for and what we got,
and why other makers just haven't achieved this yet.
Okay, so profile taper is the change in width in the blade
as you see it from the flat, okay?
And as you can see with a light cavalry saber, 1796,
there just isn't much.
Now they vary a little bit from model to model,
but as a general rule, they thin a little bit in the center,
and then flare out a little bit more towards the tip.
But overall, they just do not have much profile taper of any kind.
And this is the problem with reproductions,
is that, say, a lot of medieval swords have a broad blade here,
and they taper into a fairly fine point,
so you've got quite an acute profile taper,
and that can hide a lot of sins, okay?
Because simply put, that triangle shape
means you end up with a lot of mass here and not too much up there.
And so even if they don't have the correct blade geometry,
compared to the originals, they can get away with it
because of the shape that they've got of that acute profile taper.
Now, with a saber like this,
the originals have a massively thick, what we'd call shoulder,
which is the back of the blade where it meets the guard.
A very thick shoulder, so most British swords of this era
are in the region of about eight to ten millimeters thick here.
And then very, very thin at the tip here.
So most originals of this time, British swords,
are between one and two millimeters here at the tip, which is incredibly thin.
Now, why don't companies do that?
Well, the simple reason is it's expensive and it's difficult.
So with swords manufactured today, they start with a flat piece of steel
and they mill or grind it down.
And if you want to start with a ten mil piece of steel,
well, for a start, you've got to have a lot of steel to begin with,
and you've got to remove a lot of material.
So steel costs are higher, manufacturing costs are longer and higher, okay?
It's not just that, though,
it's that there's not just distal taper involved,
there's complex distal taper, okay?
So with these British swords, they didn't just start at,
say, let's say, nine or ten millimeters here and two down there,
and they didn't have an even taper from there to the tip.
They actually have a complex distal taper,
so they start at that, you know, nine, ten mil.
They taper down fairly quickly,
so they usually are down to about five millimeters, just about here.
So you've got a really thick, strong tang shoulder, okay?
Well, spine of the blade here.
And then it tapers down very quickly, and then it keeps tapering,
and as a result, you've got a very, very nimble, agile blade.
And this is what Winless has done.
So not only are they more accurately representing the blade shape,
the grip shape, the guard shape, the scabbard,
and every detail much more accurately than the other reproductions,
they're also going for this complex distal taper
so that the sword not just looks correct,
but handles correctly to the originals.
And this is absolutely huge because most reproduction swords
just go for a rough look of the antique,
and this Winless is now trying to be not only an exact look,
but an exact handling characteristics,
and I think that's absolutely massive.
So if I now go back to an original, okay?
So if you see my photos that I used throughout this video,
I'm comparing the Winless Light Cavalry Saber
to a Cold Steel, to originals,
to get a kind of overall feel for what it's like
and how well they achieved this.
So I think the two most important swords to compare it to
are the Cold Steel 1796,
because that is the best light cav that's been made up until this point
and the most common that people will buy for actual test cutting,
because there are a few kind of like cheapy junk wall hangers
that people did buy,
but in terms of a functional sword that you can do test cutting with
and use as a sword was intended,
Cold Steel was the one everybody went to.
And then an original,
and this isn't my smartest, nicest original,
but I think it's the most important one to compare to.
And the reason for that is this is standard in every way,
Trooper 1796,
and importantly, it's made by Osborne.
So the 1796 Light Cavalry Saber was designed
by the maker Osborne of Birmingham
with the help of Gaspard Lamarchant.
And this one is an Osborne.
So this is the OG, absolutely classic 1796.
So if you want to compare a reproduction to a sword,
this is the one you want to compare it to.
Now with antiques, with all pattern swords,
you will find variation.
So you don't necessarily want to look at every detail of this and say,
well, the Windlass didn't do it quite like that.
No, because Windlass clearly didn't copy an Osborne,
they copied just another typical example.
There were loads of makers of the Light Cavalry Saber in this era.
Osborne was just the kind of the first one to do the design.
And it is a good one to compare,
but again, don't be quite too harsh in a few little details
because the reality is,
say the shape of the piguard, the shape of the grip,
the size and shape of the langets,
even the curvature of the blade and the profile taper,
they do vary by little bits here and there
between different makers and different batches.
So this is a good comparison,
but it doesn't mean, you know, that's the be-all and end-all.
So that being said,
let's take this now as the atypical example of a 1796 Light Cavalry Saber.
You can see it's fully intact.
It's not missing any part of it.
There's no chips out of it.
The leather washer is still there.
This is a completely,
as it was made besides a bit of patination
as it came out the factory.
And so it's a great comparison.
So specs.
Well, in terms of length and curvature,
the windlass is exactly the same.
So let's just get that out of the way.
What we're really going to want to look at is weight,
balance, distal taper, handling characteristics.
Weight.
Osborne, 870 grams.
Windlass, 835.
So, you know, a little bit under,
although I will say that from two other reviews I've seen,
theirs came out at 840 and 855 grams.
So I think mine is just towards the lower end of the spectrum.
I'd love to see some more examples of weight
to see what the actual, you know, spectrum is like.
But that would suggest that they're quite consistent,
but that mine is slightly towards the lower end.
So yeah, 870.
Now, original Light Cavalry Sabers of this kind,
they can go down to about 800 grams,
which is not so common, but happens.
And they can push up to almost a kilo,
you know, around about 950 grams.
Something like that is usually the upper limit.
And let's not talk about the Bluchers there,
because they are built tougher.
But that's a different sword, even though it's based on it, okay?
Right.
So, balance.
17 centimeters on this Osborne original.
And most troopers examples I've handled
are around about 17 centimeters,
which is quite far forward, but it's not insane.
By insane, I mean there are some reproductions out there
which push it way further.
So Cold Steel, for example, is a good bit further on.
And I'm going to talk about that in a moment,
because I've got a Cold Steel here with me.
So, what do we have?
Well, you can see that the shape of the langets here
is, I would say, not the best bent.
Although, you know, that's mild steel.
I would be tempted to slightly reshape that,
because I think that's a slightly harsh bend.
Not a big deal.
Anyway, the ears, looking good.
Back strap, nice.
Grip is an excellent shape.
The ribbon that's inside the leather grip, excellent.
Sword knot, ideal.
P-shaped guard, excellent.
Overall, it's all a very close match,
and it's, you know, in scale.
Again, they can vary a little bit,
but it's nice that it's kind of scaled correctly.
Reproduction swords, they're often way out.
I mean, it's very common to have grips and guards
that are just massive compared to the originals.
That's the most common thing that happens,
just way oversized.
And in terms of, then, blade proportions,
they can often be way out.
So, yeah, grip, guards, overall proportions,
curvature, weight, all within the original category.
All looking good so far.
Let's quickly talk about that Cold Steel,
because it is important to talk about.
Because, again, this is the one
that everybody's going to compare to.
So, the Cold Steel, as I said,
it's a functional, decent sword.
But, frankly, it's a bit harsh,
but it is not that close to a 1796 Light Cavalry Sabre.
It doesn't look that close.
The blade profile's not quite right.
Handling characteristics are way off.
And there's little details that are just niggling,
why does it have this little knob on the top?
British sabres of this period pretty much all are flush.
The peen just goes straight onto the back strap.
And this is peened, so this isn't inert.
Why couldn't they just peen it
straight onto the back strap like the originals?
It's frustrating, okay?
And even things like the P-shaped guard is just off.
The ears here are in kind of the wrong place,
even though they can vary.
The blade profile doesn't actually look
like a Light Cavalry Sabre.
This actually looks more like some of the,
well, it looks like an Indian reproduction.
That isn't to disparage swords made in India,
but I mean the cheaper end of them, okay?
So, right, Cold Steel.
Let's talk about it more.
This one was actually a factory second.
It was discarded by Cold Steel because it was too light.
So it was chucked in a bargain bin
and a friend of mine in America picked it up
for another friend of mine as a kind of,
well, this is actually one of the best
that Cold Steel can make
because they've actually thrown it out
because it's too light.
So this one is 928 grams
and I've seen many push more like 960, 970, 980.
So it's only a little bit under.
Notice from the weights I talked about with the originals,
this actually, Cold Steel,
is still within the historical weight range.
It's just towards the higher end
of how you find originals,
but it's within the historical weight range.
And you think, oh, therefore it must be about right.
No, because there's a lot more to swords than just weight.
And this is where the distal taper
and complex distal taper is hugely, hugely important.
So the windlass does indeed look actually way closer
to a real 1796-like cavalry sieve, which is fantastic.
But if we just talk about handling characteristics
for a moment,
this Cold Steel has a 21 centimeter balance.
Now I said the original has 17,
the windlass also has 17,
but even that doesn't really tell the full story
because this Cold Steel does not have,
it's reasonably thick,
but it doesn't have a hugely thick shoulder.
It does not have complex distal taper.
And as a result, you end up with kind of
not enough mass at the hilt,
a bit too much in the middle,
and then the tip is a bit club-like.
Now they've tried to fix that
by not flaring it as much as the originals.
So they've actually thinned the profile taper down
to try and fix some of that.
And it's done a little bit of the job, but not enough.
So this Cold Steel does indeed handle more like a club
and not that close to a 1796-like cavalry sabre.
And that's a shame, okay?
Most people in HEMA
will not be able to buy a 1796-like cavalry sabre.
They have massively rocketed in price.
They're out of reach for a lot of people.
And obviously if you don't live in the UK,
they're even harder and more expensive to get.
And so most people, if they ever wanted a cavalry sabre,
were going to get a Cold Steel
if they were actually going to cut with it.
And they might be under the illusion then
that it's a big, heavy, clumsy chopper, okay?
Now it is a chopper, but it's not clumsy.
So there's the Cold Steel for you.
It is fine as a backyard cutter.
It's tough.
It'll hold a good edge.
It'll smash through things quite successfully.
It's fine.
It's like a lot of Cold Steel products,
is that it's club-like, industrial,
not that great in terms of handling characteristics,
but tough and will cut things.
If you want to cut a pig, it'll work fine, okay?
But it won't handle like a light cavalry sabre.
Okay, so that's the Cold Steel out of the way.
If you can get a Cold Steel cheap,
they're still a good backyard cutter.
But don't be under any illusions
that it's that close to a 1796-like cavalry sabre.
Back to the windlass.
Is it like an original 1796-like cavalry sabre?
Yes, okay?
It fundamentally looks the part, handles the part,
and is therefore incredibly close to the original swords.
All sounds amazing, doesn't it?
Okay, absolutely revolutionary for sword collectors,
for sword cutters, for haemorrhists
that can finally actually get a sabre.
Now this is massive.
If you test cut, and test cutting is a bit overblown, okay?
But it is important.
Everybody should do some test cutting.
You don't need to obsess over it,
but you should do some test cutting.
And ideally, you want to test cut with something
that handles like a real sword,
and also gives you some idea
of what the real deal will be like to handle.
So this is huge.
Anyone now can just buy this off the shelf.
They're usually in stock now, quite cheap,
and have something that is like the real deal.
That is absolutely huge.
Are there any downsides?
Because obviously right now, it's all glowing.
This is basically a million times better
than the Cold Steel, which it is.
Are there any downsides?
Okay, so obviously I have to bring up a few niggles,
because that is important.
Firstly, I bought this sword entirely.
I wasn't provided with it for the review,
so I'm not going to show any bias here.
Niggles, okay?
It's floppy, okay?
It is a very floppy sword.
Now, I have seen in some reviews,
people complaining that it's just way too floppy,
and they don't like it, and they can't use it.
It's really, really important to note here
that British swords of this period
are typically very springy and quite wobbly.
That's completely normal.
Now, it's a little bit too wobbly.
So if you do a flex test on this,
which is where you put the tip onto a weighing scale,
and you press down with your hand
until the blade starts to bow,
that'll give you a simple way of testing flexibility.
My original Osborne there has about five kilos flex,
and this windlass has 3.5.
So you think, okay, it's too flexible
compared to the original.
Wait for a moment.
British swords actually of that era
have very flexible blades.
If you look at my two heavy cavalry swords, for example,
which you think would probably be more brutish,
they actually are around about two to 2.5 kilos of flex.
Spadrunes of the era, often two to three,
other sabers I've tested, two to three, up to about four.
So that Osborne is actually quite a stiff example,
and many originals were floppy.
And if you see this footage from the Royal Armouries
when they did some test cutting
with an original light cavalry sabre,
you can see just how floppy the originals actually were.
So in terms of a niggle,
it is a little bit too floppy,
but they were a lot more flexible and floppy
than you necessarily think.
Why is that?
Well, I'd have to discuss that in a whole video,
but in a very short, tiny short segment,
I will just explain that.
In the late 18th century,
British swords went through a testing procedure
that was introduced by the army
where they had to pass certain proofing tests.
And significantly, they were put in a machine
that flexed them to quite a significant degree
and they had to return true.
And then they had to beat them
against wooden and metal blocks
as basically a testing procedure.
And that is what gives them the ordnance inspection stamp
because they've been through that process.
And for more expensive officer's swords,
when you see warranted or warranted never to fail,
that's officer's swords
going through the same test procedure.
Now, if your swords are going through
that kind of procedure,
it encourages makers to make swords
that are obviously flexible
so that they survive the tests.
And so it's no surprise
that British swords in that era are very flexible
because that will be the optimal way
to get through the tests.
It doesn't mean, of course,
that it's the best way to make a sword,
but it's the best way to pass the tests of the time.
And so that's what they were like.
There we go.
Right, so it's a small niggle.
It's a little bit too flexible,
but it's not as much of a niggle as you think
because they were flexible.
Right, other things.
It's sharpened on the back edge, okay?
So this section here,
which on a flared out tip,
we often call a yeoman,
although obviously in the British light cavalry,
it doesn't actually kind of notch out.
It's just flared slightly,
but you could still call it a yeoman.
It's sharp, just as sharp as the front edge
for about a foot of the blade.
Now, British swords of this era
typically did not have a sharpened back edge.
And, you know, you can argue about the reasons why,
but I'd say it's quite simple
that they didn't use back edge cuts.
If you look at British sources of the period,
they did not use the back edge.
So it wasn't considered important.
They didn't sharpen it.
They're always the odd exception to that rule.
I've got an original sword
that does have a sharpened back edge,
but the vast majority,
if you look at all my antiques,
the vast majority that are service sharpened on the front
have blunt back edges.
So they have sharpened the back edge.
Is that necessarily a problem?
Well, no, not really.
Okay, you can just go,
oh, I'm going to test cut,
but I won't use the back edge
because it wouldn't have been sharp originally.
But if you do want to test cut with a back edge,
because some swords, of course,
did have sharpened back edges,
you've got a sharpened back edge.
So I don't mind that so much.
It's not typical for the originals,
but it doesn't affect the sword in really any way.
And it is kind of nice
if you want to be able to do some back edge saber test cuts.
And, you know, for example,
if you like Polish sabers
and Polish sabers frequently have a sharpened,
you might want to buy one of these
because is this close to a Polish saber?
Absolutely.
British cavalry sabers of this era
were based heavily on Polish, Hungarian, Austrian designs.
Okay, so this is very close to a Polish saber.
It has the sharpened back edge.
There you go.
Buy this, do some back edge cutting.
Other niggles.
I mentioned about this bend here.
I think that's slightly off.
It's a tiny deal.
You could just bend it a little bit back.
Not really an issue.
And what else?
The polish.
Do you notice how shiny it is
and how my fingerprints are showing really badly on the blade?
I'm going to have to go and wipe this down in a minute.
I think they've taken the polish a bit too far.
The polish and the grind has gone a bit too far.
I don't think it needed to be quite this shiny.
And of course, if they hadn't taken away
quite so much on the polish and grind,
it might be a little bit heavier.
And at 835, you know, fine.
But I would have liked it more like the Osborne around 870.
I think my perfect range for a Leicav would be 850 to 880.
It would probably be the absolute ideal.
So it's a tiny bit under.
And clearly other people that have had these are within my ideal range.
That's a minor, minor deal.
The most important thing about this kind of sword
is that it handles like the real deal, okay?
You could also put it on the wall
and it will actually look like a 7906 Leicav or a Sabre.
So as a haemorrhist, as a sword collector, how is this?
Well, it looks like the real deal.
It handles like the real deal.
I have not test cut with it yet because I do my test cutting outdoors
and I live in Wales and the weather is foul
and it's been raining almost all the time.
I will test cut with it soon,
although I've seen other people do lots of successful test cutting with it
and that seems to be working fine.
It came very sharp.
I could go and test cut with this now, no problem.
And that's interesting because previously,
Winless didn't actually export swords sharp.
I don't know what's changed there
because it was a rules thing shipping as their country
and this one has come razor sharp,
which is fascinating and very handy as a haemorrhist
because not everybody is familiar with putting an edge on a sword
and it just means it's ready to go.
So do I have anything else to say about it?
Well, there's, after the haemorrhists issue,
oh, I will also say because of the kind of zealous, overzealous polish and grind,
the rivet going through the ears here
and the peen section here,
they're completely flush and almost gone.
And again, I would like to see a slightly less extreme grind and polish on this.
But again, it doesn't really matter as long as it stays intact.
It looks nice.
I don't really mind that so much.
So from a haemorrhist perspective,
buy one of these,
you'll have something that handles like a original cavalry saber
that you never could have got before
without spending a lot on an antique or a lot on a custom sword.
So you can get the real deal, you can have some fun with it.
From a antique collector's perspective,
is this sword going to be a problem on the antiques market?
And potentially, yes.
Knock-offs, aged reproductions, this kind of thing are really common.
If you look at any auctions, pretty much every week,
there are antique dealers posting up knock-off swords.
Some of them might know and some of them don't.
And unfortunately, unscrupulous dealers get better at modifying swords all the time.
Are we going to see an influx of these on the antiques market
passing off as originals?
Undoubtedly, of course we will.
Now, how can we protect against that?
Well, we do have on the blade,
we have this windless mato marking on the langet here,
okay, just above the langet,
on the thumb side of the blade as a right-hander.
That is the thing to look out for,
because it's engraved quite deeply in the blade.
And to get that out, you will have to grind quite deeply into the blade.
So if you ever see a Cavalry Sabre for sale,
one of the first things to do is to look at this flat part of the blade
and see if it's been ground away.
Because the only thing you should ever really see
on a trooper's version of this sword of that time,
is an inspection stamp.
You'll pretty much never see anything else,
because maker's names were put on the spine.
Only officer's swords really put it on the fuller.
So look for that.
You should see an inspection stamp on most light Cavalry Swords,
and you shouldn't see any ground away section
where that windless marking has been taken away.
There are a few other cues,
but ultimately this is very close to the original.
So antique collectors, you know, be careful,
do your due diligence.
It is something to look out for.
Now, onto the future.
What do I think of this product and where it's going?
Frankly, this is revolutionary for humorists,
for sword collectors who want to collect swords
that allow them to get the handling
or the cutting ability of originals
without having to spend massive amounts of money on antiques.
It is absolutely massive.
This is the way to go in the future for reproduction swords.
And remember, this is not an expensive custom.
This is a very affordable, off-the-shelf,
readily available sword.
This is the absolute future.
This is exactly where we need to see reproduction swords go in.
So any niggles that I have with this are really quite small.
This is fundamentally what we need to see
with so many different swords on the market.
This is exactly where reproductions need to go
because it's absolutely epic
that any of you can just get your hands on something
that is, you know, the real deal effectively.
So that's it.
Would I recommend this sword?
Absolutely, okay?
I didn't need this because obviously I've got antiques
and I do cut with some of my antiques.
I didn't need a test cutter.
I didn't need a reproduction.
I bought this for science, okay?
For you guys, for the humor community at large,
for our humor clubs to see if it was really worth having.
It is absolutely worth having and I will keep this.
And in fact, I will now do a lot of my test cutting with this
because I very carefully select antiques for cutting.
You shouldn't just use all antiques for cutting.
I use basically lesser condition and cheaper examples
that aren't so valuable for my test cutting.
I will just retire those now into display use
and mostly if I want to cut with a Napoleonic era sword
or saber specifically, I will cut with this
because there's no reason to put the wear on the antiques anymore.
Lastly, if you are going to do some test cutting with these,
please have some respect for the weapon, okay?
This is a sharp sword
and it's a sharp sword famous for, again,
cutting limbs off, cutting heads off.
It is very, very dangerous, okay?
It's not just a kitchen knife.
It is a butcher's blade, okay?
Please be careful with it.
When you swing through, watch out where your sword is going.
Make sure you've got grip retention.
Don't smack into anything.
Just please be careful with it
because it does have the power to do massive, massive damage.
And that's it.
Absolutely fantastic product.
I didn't actually mention anything about the scabbard,
but you've seen it in the photos.
The scabbard is really nicely done.
The throat is perfect.
The rings are the perfect size.
I'm not like the Cold Steel one.
The brass brazing, okay?
That's actually a really nice touch
that you don't get on reproductions normally.
It's the correct weight.
It's the correct size.
And if there was one niggle I would mention,
which I don't really have an issue with,
it's lined with some plastic.
So in the originals of these,
they tend to have wooden slivers
that go basically the length
to keep the sword basically retention, okay?
And it doesn't have those.
It has plastic.
But you can't tell unless you put a light down the throat
and really look quite deep in there.
So I don't think that's an issue at all.
But you know, again, you might find that it is.
So in the UK, I bought this from the Knight Shop.
280 pounds.
And they do free shipping over 200 pounds anyway.
So yeah, 280 pounds.
That is an absolute bargain.
By far one of the best reproduction swords I have ever seen,
particularly when we consider that price point.
And it's the only reproduction Napoleonic saber
that I've ever seen that is frankly like the real deal
and therefore one that I would want to have personally.
So that's it.
I know this was a bit rambling.
There was quite a lot to say.
When we compare it to the originals,
it is incredibly close.
When we compare it to the Cold Steel,
it blows it out of the water.
Is there any reason to have the Cold Steel now over this?
Potentially only two reasons.
If you can get it cheap in the US.
In the US, you can sometimes get Cold Steel a lot cheaper than we can,
particularly in bargain bins and stuff.
So if you can pick one up cheap,
you know, significantly cheaper than the windlass,
still do that.
If you really want a very rigid blade,
which is actually much more rigid than the originals,
yeah, maybe you might want that as well.
But for me, I wouldn't bother with the Cold Steel one anymore
unless it's a real cheapie.
This is absolutely fantastic.
With the last caveat being that I need to long-term test it
with lots of test cutting to see how it holds up over time.
But I'm fairly confident that's going to be all good.
So thanks for watching.
I really hope you enjoyed the video.
Please subscribe if you haven't already.
