How to apply sealer to a brick wall...Part 2

VideoJoeKnows
63 followers
1 Video View·Apr 27, 2026
http://www.VideoJoeKnows.com How to seal a brick wall (Part 2) is easy, when you know how. Do you need any special tools for how to seal a brick wall? I don't know how to paint. Is it that difficult to paint on the sealer to a brick wall? How long is it going to take to seal a brick wall? Questions questions questions. Just watch this howto video on how to seal a brick wall. You can do it! http://www.VideoJoeKnows.com
of course you know to work from the top down that way you can saturate it if any runs down
it's running down into your surface that's not been sealed yet okay you need that if this wall
was any much bigger than this i probably wouldn't be doing it with this paintbrush have to figure
out a different way that would take forever it's trying to do the whole side of the house this way
that's when i'd take a hudson sprayer probably put the sealer in there
more than likely might have to throw the hudson sprayer away when i got done
because it'd be all sticky inside you know but i've seen people do that before if they're sealing
their their driveway let's say and put it in a hudson sprayer then you can spray it on there
how nice those bricks are looking with the sealer on there now granted this is only the first coat
you're going to need to put more than one coat on you can do it this will give you some practice
you get ready to paint inside your house you practice using the paintbrush out here
just be careful as you're dipping into your sealer you don't feel comfortable right on the concrete
sidewalk or something put down a piece of plastic or something like that because you don't want to
get some of that onto a sidewalk in one little spot or else you're going to see it later unless
you're planning on sealing your entire sidewalk let's say ah nice well i'm done with the first
coat that didn't take too long let's see how nice and wet looking that is well this is what it's
going to look like after the first coat this one's still drying you see a slight difference is a
little bit lighter here's the first part we did this side's almost dry you see it almost almost
looks the same as before a little bit a little bit darker that's because all the sealer most of it
has sucked right up inside the brick right up inside the grout lines now see when we put the
second coat on it's not going to suck into the concrete as much now it's going to be getting on
the outside surface okay well once i put a second coat on here i'm curious to see if it's going to
be good enough if it needs a third coat you know what i probably have enough sealer here because i
had to buy a whole gallon of it and i might even put a third coat on there we'll see now before i
seal this you didn't see me do anything to the brick did you on this particular video i i cleaned
it all first those are some other videos that if you haven't seen those you might want to check
those out you know but wash your brick down clean off any moss and mildewy areas scrape off any
imperfections on the concrete and stuff like that and clean them off get the cobwebs off get all
this dirt and grime off them and stuff before you install the sealer okay don't forget
