This video shows the process of creating a Mississippi Map Turtle paludarium, from aquarium construction and concept development to selecting wood and plants to create a semi-natural habitat. Artificial rocks were used to create a balance between land and water, creating a more natural environment. The ecosystem was then built using starter bacteria, a bacteria house, and lighting from Fishco Aquatik to aid biological processes, support plant growth, and maintain habitat stability. This video was created in collaboration with Fishco Aquatik. Purchase links for the products used are available through affiliate links.
🎬 Thank you so much for watching!
Stay tuned for more exciting content! 🐠
📌 I only have one official account: 📱 TikTok: @KompekHabitat ❌ Beware of fake accounts #Paludarium#Handicraft
In this video, I'll share the story behind creating a paludarium ecosystem from scratch.
Starting with assembling the aquarium,
designing a paludarium concept
utilizing fallen wood,
and hiding the filtration system inside artificial rocks.
I did all this to create the best possible habitat for the Mississippi map turtle.
Before designing a paludarium,
I decided to make the aquarium first.
Since in the future the aquarium will be placed on this shelf,
I measured the shelf first,
if the aquarium size can be adjusted.
After the aquarium size has been determined,
I began the aquarium construction process using 5 mm thick glass.
I will cut it into several pieces,
and its size is adjusted according to the rack size as a reference.
Next, the cut glass will be assembled.
Each side will be sanded first.
Then bonded with silicone adhesive.
until they merge and form a ready-to-use aquarium.
I will cut it into several pieces,
Then bonded with silicone adhesive.
Here I am designing an aquarium,
which will be completely closed like this.
In the front section, there will be a door that can be opened and closed.
However, for this aquarium to have air circulation,
I have to make a large hole at the top.
I hope this glass doesn't crack when drilled.
Finally, the glass was successfully drilled.
Before proceeding, I first clean up the glass shards.
so as not to endanger.
After the glass has been drilled.
I installed a frame to cover the uneven glass area.
At the same time, I also installed mosquito netting,
so that air can move freely and to prevent insects from entering.
Air circulation has been completed.
I continued the installation process in the aquarium.
Here I also installed a door lock magnet,
so that the door can be easily opened and closed later.
And finally, installing the glass door.
Finally, this aquarium has been completed.
After the aquarium was completed,
I rested for a moment.
At this moment, I'm taking a short break.
Here, I'm looking for ideas for a paludarium concept to be designed.
while enjoying a cigarette and a cup of coffee.
In such a tranquil atmosphere as this,
Ideas arise spontaneously.
I will start drawing the paludarium concept.
to determine the material,
arranging the layout,
and designing its ecosystem.
Here I imagine,
Eventually, there will be three trees standing inside the paludarium.
arranged like pillars that serve as the focal point of the entire landscape.
Behind the trees,
I want to add a fern plant.
I layered the leaves
the rear windows that overlap each other
to create the illusion of depth.
From this sketch,
I can already imagine it
How the paludarium ecosystem will eventually form.
In the end,
These sketches have now evolved into a complete paludarium concept.
After I got a picture
What will the paludarium look like?
I decided to go look for the materials that would be used.
I went not to the store,
but to the green area in the city park.
There are usually many abandoned logs here.
and wild plants I can make use of.
Upon arriving at the location,
I immediately headed toward the abandoned pile of wood.
One by one, I observed the wood.
finding the most suitable form
to be used as a tree trunk inside a paludarium.
The wood I took comes from a saga tree.
The wood texture of the saga tree is fairly hard and dense,
making it suitable to be used as a replica tree inside a paludarium.
So I took it.
After obtaining the wood,
I stepped into a more wild area.
to look for plants.
The vegetation here is very dense.
And the most dominant are various species of ferns.
Ferns from the genus Stenochlaena are visible.
Its leaves are elongated, with a glossy surface.
And the new shoots are bright green.
In the same area,
There is a Microsorum scolopendria
with leaves that are wider.
At this location,
I decided to collect Acrosticum danaei vol.
Its small leaf arrangement
and spaced along the stalk.
Visually,
Its form presents a strong tropical ambiance.
Here, I'm just taking a little bit of it.
Because I still have many fern plants.
I continued retracing the area around here.
to take a look at the plants in this area.
Here I see white betel leaves growing wild.
Some patterns on its leaves appear variegated.
This is caused by a lack of chlorophyll in部分 of the leaves.
Betel nut attached to the trunk of a tree
appears to have larger leaves
because it receives more sunlight.
I continued gathering terrestrial moss.
Moss grows quite abundantly in this area.
due to its humid environment.
These mosses grow abundantly in this area.
They grow on decaying or rotten wood.
I collected this moss without bringing along its growing medium.
I put it back in the middle
if moss can grow back there.
I also gather the rustling of dry leaves
to add a natural touch within the paludarium.
After all the materials have been gathered, it's time to go home.
I carried pieces of wood, ferns, moss, and fallen leaves.
Natural materials from the dense surroundings of this place
which will later become part of the ecosystem within the paludarium.
Upon arriving home, I continued the process of working on the wood.
I will shape it into a replica of a tree.
The first one I'll cut it
and selecting the part most suitable to the tree's character.
After the wood was cut, I stripped off its entire bark until it was completely clean.
To add the character of a real tree to wood,
I will make a few scratches on its surface.
using a carving drill.
It seems this wood is not yet fully dried.
Its texture is still moist, causing it to frequently stick to the drill bit.
Thus, the carving process feels slightly more difficult.
Because wood fibers often adhere to the drill bit,
I manually pulled out the adhered fiber.
so that the engraving process becomes easier.
After the wood was carved, I sanded its surface.
to remove any remaining fibers that are still attached.
Finally, this replica tree is also completed.
I had to stop because it was approaching maghrib time.
I will continue the paludarium construction tomorrow.
Today, I continued the process of making a paludarium.
namely the hardscape construction phase.
At this stage, I am mixing cement to make artificial stones.
Before making artificial stone,
I put in the styrofoam first.
as artificial stone foundation.
I also included the box filter.
which will later be closed and concealed by artificial stone.
After that, I began the process of manufacturing artificial stone.
I will make its shape resemble an uneven swamp edge.
curved and naturally appearing.
At this initial stage, I first pile up the cement.
After the pile of cement has formed the basic pattern,
I inserted the tree I had made earlier.
I placed this tree at the top.
which will eventually become land area.
Then, I let my semen harden slightly first
Before proceeding to the detailing process.
Now it's time to move on to the detailing stage.
With the help of a fork,
I scraped the surface of the concrete.
forming abstract gaps that give the impression of natural texture.
At this stage, I am installing the filter cover.
I coated the top part with cement so it would merge with the hardscape.
I'll laminate this cover with plastic.
so that the cement does not stick to the cement around it.
Thus, the filter cover can be removed later.
I also concealed the filter outlet hole with cement.
so that the hardscape looks more natural.
To enhance the natural impression,
I added color using cement mixed with brown pigment.
With the help of plastic, its surface is randomly tapped.
so that the texture looks more natural.
After everything was finished,
I clean the glass that has been stained with cement.
The hardscape construction is also complete.
I will wait for a few days
if the semen is truly hardened
before proceeding to the next step.
After waiting two days,
The semen finally hardened perfectly.
The formed hardscape now
has come to resemble a miniature natural landscape
with distinctive textures and exotic gaps.
However, before this hardscape is used,
I soak it first
in an aqueous vinegar solution for one week.
The purpose of this soaking is to reduce residual substances.
from cement that can make water quality poor.
After soaking the hardscape in vinegar solution for one week,
Today I will be planting seedlings.
and began operating the ecosystem inside the paludarium.
For growing media,
I am using nutrient-rich humus soil.
Next, I started growing ferns
in accordance with the previously designed concept.
Here, I'm adding a bit of moss at several points.
To mimic the effect of a forest floor,
I scattered the rustling of dry leaves.
At the bottom, I used fine sand substrate.
Before filling with water and activating the paludarium ecosystem,
I will prepare the filtration system first.
The media filter I use is Fishco Aquatic's bacterial house.
This high-porosity medium will eventually
will become a place where nitrifying bacteria colonies work,
Processing waste into nutrients.
I'll go into more detail later.
How do bacterial homes work to maintain water quality?
After the filtration system has been completed,
Now it's time to fill with water.
However, chemically,
The incoming fresh air is still neutral in nature.
and still lacks biological stability
in controlling toxic substances such as ammonia.
To address this biological vacuum,
A bacterial starter is required.
as found in Fishco Aquatic.
Although in powder form,
This is actually a colony of microorganisms.
in dormancy phase
hibernated through a controlled laboratory process.
As soon as it comes into contact with water and oxygen,
The microorganism will become active again from its long sleep.
as if receiving a signal to start working.
Although invisible to the naked eye,
These microorganisms slowly build a biological defense fortress.
at every corner of the aquarium.
Without ceasing,
This microscopic organism carries out its vital task,
taming the deadly ammonia,
convert it into nitrite,
then transforming it into nitrate, which is much safer for the ecosystem.
However, these remarkable bacteria cannot work alone.
They need a place to settle and reproduce.
This is where the Fishco bacteria house plays its vital role.
Although it appears dense at first glance,
This medium actually contains thousands of microscopic pores within it.
These pores serve as protective apartments for bacteria.
to build an innumerable number of colonies.
That's how bacterial houses and starter bacteria work.
They are interconnected and work synergistically.
to operate and maintain the balance of the ecosystem within the aquarium.
After waiting for a week,
The main inhabitant of the paludarium I've been looking forward to has finally arrived.
I bought a Mississippi map turtle.
which will become the main inhabitants inside the paludarium.
However, before they were introduced into their new habitat,
Let us first take a look at the current condition of the paludarium.
Here is the paludarium that will become the new habitat
For the Mississippi map turtle.
The first week is a crucial phase
at the same time, a magnet for a paludarium.
It is at this moment that this artificial ecosystem begins to breathe.
and gradually found his balance.
Below the water surface, nitrifying bacteria such as Nitrosomonas
and Nitrobacter has established colonies in the pores of the filter medium.
They work nonstop, converting harmful ammonia into nitrite.
and finally became nitrate, which is much safer.
Here is the reason why water not only appears visually clear,
but also chemically healthy.
The dried leaves submerged begin to release tannins.
It gives a subtle amber hue or soft yellow tone.
making the water more natural and more vibrant.
Humidity in the area where water and land meet
creating a kind of stable transition zone.
This area keeps plants along the water's edge moist and hydrated.
but not too wet
thus preventing the roots or stems from rotting.
On land, newly planted ferns
Gradually beginning to overcome the adjustment stress phase.
If on the first day its leaves appear wilted,
Now the young ones are starting to stand upright,
as if searching for and following the direction of the light.
A well-running photosynthesis process
Make the plant fresh and healthy again.
The secret behind this condition lies in the light source.
I am using the Biopristin lamp from Visco Aquatic.
Many bright lights, yet they反而 make the plant's color
or our fish look dull or unnatural.
This Visco Aquatic lamp has a light spectrum
designed to highlight the original color pigment
from each object within it.
This lamp has premium quality.
The material uses high-quality aluminum.
Its minimalist design will give a luxurious impression.
on the aquarium display.
The light produced has high color accuracy.
so its light is almost identical to natural sunlight.
As a result, the environment's colors appear more natural.
More vibrant, yet not excessive.
Now it's time to add the inhabitants to the paludarium.
The first inhabitant I introduced was the ramshorn snail.
This small snail acts as a natural cleaner.
They eat leftover food and thin algae on the glass.
Moreover, this snail can also serve as a natural food source.
divide the turtle.
Next, I added the catfish.
This small fish is known for its activity and agility.
so it is relatively safe to combine with turtles.
Appearing from their active and dynamic behavior
serve as an indicator that water quality is in good condition.
They swim in a group,
occasionally change direction simultaneously,
creating a natural rhythm within the water.
With their presence, this paludarium feels even more alive.
more natural, and beginning to resemble a genuine small ecosystem.
And finally, the most anticipated moment arrived,
Introducing two Mississippi map turtles.
The first turtle I released immediately went into the water.
The second turtle showed a different attitude.
She paused briefly on land, calmly observing her new home.
After feeling sufficiently confident, he began moving toward the shore.
and finally stepped into the water.
Soon afterward, both of them began to display their natural instincts.
They appeared to be eating a tramshorn siphon.
As if their instincts for hunting instantly activated
Once inside this paludarium.
They must be very hungry after the long journey.
However, this moment also marked the beginning of their adaptation.
no longer recognizing his new environment as a foreign place,
but as a habitat providing life.
The Mississippi map turtle is a species of freshwater turtle.
from the United States.
The map's name is derived from the pattern of lines found on their head.
which resembles a topographic map.
In their native habitat, they live in the Mississippi River currents.
who is calm and serene.
Here, I have decided to reduce the fish population.
if the ecosystem is not too dense.
With a more balanced amount,
The range of motion becomes more spacious.
Here I give them food,
Today's menu is Hong Kong worms.
which serves as an additional source of protein
to support their growth.
It is clearly visible how hungry they are.
respond to the given food
with such a rapid reaction.
When turtles bask in the sun, they appear calm.
enjoying the warmth of the light,
to regulate its body temperature.
However, when approached,
They immediately headed into the water.
This behavior is their natural instinct for defense.
Mississippi turtle in the wild
Always vigilant against threats from land,
That is why water became the safest place for them.
for shelter.
This paludarium is a miniature ecosystem.
that lives inside the aquarium.
From invisible bacteria,
plants that maintain air balance,
the lamp that becomes the source of energy,
every movement of the fish and turtle,
Everything is interconnected within a single cycle of life.
What began as nothing more than a design,
It has now become a space full of life.
The journey of this ecosystem has just begun.
And each phase will become an interesting story worth documenting.
So make sure you press the subscribe button
so you don't miss the next video.