How To Tell Apart The Jumps In Figure Skating!!

Ice Skating
31 followers
Apr 28, 2026
Hey guys! In today's video, I will be sharing with you guys all the figure skating jumps and how to tell the difference between each of them.
This video was requested, so I really hope that this helps you guys and gives you some more information about each jump in figure skating.
So, without further ado, let's get started.
In figure skating, we have six different types of jumps.
Sock out, toe loop, loop, flip, lutz, and axle.
All six of these jumps can be completed as singles, doubles, triples, quads, and even possibly as quints in the future.
There are two different groups of jumps, toe jumps and edge jumps.
Toe jumps include toe loop, flip, and lutz.
These are toe jumps because you use your toe to help you vault yourself into the air.
Edge jumps include axle, sock out, and loop.
These are edge jumps because unlike toe jumps, we use our edges to help vault us into the air.
Every jump lands on a back outside edge, but depending on whether the skater is a righty or a lefty, their landing leg will differ.
Skaters who are righties land on their right leg on the back outside edge, and skaters who are lefties land on their left leg on the back outside edge.
Now, let's get into how to determine each jump.
We're going to start off with sock out.
As I already mentioned, sock out is an edge jump, which takes off gliding backwards.
The most common entry for a sock out is from a back three turn mohawk sequence.
On sock out, skaters are gliding backwards on their skating foot with their free foot in the air behind them.
Before taking off, the skater will bring their free foot around and to the front, and will use this foot to lead the jump up into the air.
After completing the proper amount of rotations in the air, the skater will land in their landing position.
Now, let's look at toe loop.
Toe loop is a toe jump.
Toe loop also takes off gliding backwards.
Most commonly, skaters will complete a three turn combined with a weight transfer to the other leg before taking off for the toe loop.
After the transfer, skaters will put the toe pick of their free leg into the ice, using a pivot motion to help launch themselves into the air.
After completing the proper amount of rotations in the air, the skater will land in their landing position.
Toe loop is one of the most common jumps used as the second jump in jump combinations.
Now, let's take a look at loop.
Loop is another edge jump.
Loop takes off gliding backwards.
On a loop jump, skaters will most often be gliding backwards on both feet with more pressure on their back leg, and their front leg is just slightly grazing the ice.
In this position, their legs are slightly crossed with one foot in front of the other.
From this cross position, skaters will create a sharp curve with their back leg, and use this to help launch themselves into the air.
The leg that was in the front on the cross position will help lead the jump into the air.
After completing the proper amount of rotations, the skater will land in their landing position.
Loop, along with toe loop, is another common jump that is used as the second jump in jump combinations.
Now we're going to talk about the two jumps that I think are the hardest to tell apart, so this is the part where you really need to pay attention.
Starting off with flip.
Flip is a toe jump which takes off from gliding backwards.
Most skaters take off for their flip from a three turn.
Unlike a toe loop, skaters do not transfer their weight before taking off for a flip.
After the three turn, skaters will pick the toe pick of their free foot into the ice, and use this to help vault them into the air.
After completing the proper amount of rotations, the skater will land in their landing position.
The most important aspect of a flip is that the foot that is on the ice will be gliding on an inside edge right before taking off.
Sometimes, the skater might switch to an outside edge on the flip, which can cause them to receive an edge call and they will get points deducted, even if they land the jump perfectly.
Now we're going to talk about lutz.
Lutz is another toe jump that takes off backwards.
Lutz is very similar to flip.
Most of the time, skaters don't do certain turns before lutz unless it's a part of their choreography.
As the skater is gliding backwards, having their legs slightly crossed, with more pressure on the front leg, they will lift their back leg and pick their free foot toe pick into the ice.
Similar to a flip, they will use this toe pick to help vault them into the air.
After completing the proper amount of rotations, the skater will land in their landing position.
The most important aspect of a lutz is that the foot that is on the ice will be gliding on an outside edge right before taking off.
Sometimes, the skater might switch to an inside edge on a lutz, which can cause them to receive an edge call and they will get points deducted, even if they land the jump perfectly.
The final jump we're going to go over is axle.
Axle is the easiest jump to spot because it's the only jump that takes off of a forward outside edge.
On an axle, the skater brings back their free leg and swings it forward on takeoff.
They use this momentum to help vault themselves into the air.
After completing the proper amount of rotations, the skater will land in their landing position.
Alright guys, so this is the end of the video. I hope that you guys enjoyed and that it helped you guys learn some more about figure skating jumps and how to tell the difference between them.
So if you guys have any other recommendations of videos that I should do, leave them in the comments below and I'd be happy to do them for you guys.
But I hope that you guys enjoyed and I will see you guys in my next video.
Love you guys! Bye!
Thanks for watching!
